Exchange Currencies Track Order Guides Telegram bot

Swap Bitcoin SV (BSV) to Hyperliquid (HYPE) with no sign-up

Enter the BSV amount, paste your 0x address on HyperEVM from your own wallet, then send BSV to the one-time deposit address on your order page. Once the Bitcoin SV network has confirmed the deposit, the exchange partner swaps it at the floating rate and sends HYPE on HyperEVM straight to your address.

Swap HYPE to BSV instead

Network Fee
-
Deposit Fee
-

Enter an address on the HyperEVM network. Coins sent to an address on another network can be lost.

Swap in Telegram

No Account Needed to Start

Swap without creating an account or uploading ID. xswap.to never asks for your seed phrase or private keys, and the exchanged coins go straight to your wallet. In rare cases the exchange partner's compliance check can pause a swap and ask for verification.

Updated Written and checked by the xswap.to team

BSV to HYPE exchange rate

The BSV to HYPE rate on this page is an estimate for a real swap after fees, so it reads a little lower than the ratio of the two market prices. It floats with the market until your deposit confirms.

Type any amount into the calculator below for a live figure. The daily table tracks the market rate between the two coins on each recent day, before swap fees, from xswap.to's own price record.

BSV to HYPE Calculator

Enter an amount to see about how much you would receive. The estimate uses the live floating rate and already includes the payout network fee.

BSV Bitcoin SV
You get (estimate)
HYPE HyperEVM
0
Rate
-
Value in USD
-
Network Fee
-

BSV to HYPE daily rate

Market rate before swap fees, from xswap.to's own daily price record, Nov 16, 2026 to Nov 20, 2026.

Highest0.225155 HYPE
Lowest0.21552 HYPE
Change, 4 days−0.59%
DateRate
1 BSV ≈ 0.219266 HYPE
1 BSV ≈ 0.225155 HYPE
1 BSV ≈ 0.218244 HYPE
1 BSV ≈ 0.21552 HYPE
1 BSV ≈ 0.220578 HYPE
Live Market Snapshot Updated Nov 20, 2026 02:01 UTC
1 BSV price
$14.93
1 HYPE price
$67.51

How to swap BSV to HYPE

  1. Copy your HYPE address

    Open your wallet on HyperEVM, chain ID 999, which wallets may list as Hyperliquid, and copy the 0x address from its receive screen. Paste it into Recipient Address and compare the first and last characters.

  2. Enter the BSV amount

    Type it in the form at the top. If it is under the pair's minimum, the form shows that minimum and one tap fills it in. The HYPE estimate under it already has the payout fee taken out.

  3. Send BSV to the deposit address

    Press Exchange Now. Your order page shows a one-time Bitcoin SV deposit address: send the amount you entered in one transaction. Send the BSV from a Bitcoin SV wallet you control, and check the network fee it shows before you confirm.

  4. Follow the order until HYPE arrives

    The status moves from waiting to confirming, exchanging, sending and finished. Keep the transaction ID from the order page until the HYPE is in your wallet.

What the BSV to HYPE swap costs

Two costs come out of the estimate before you see it: the exchange margin and the HyperEVM network fee for your payout. You pay the Bitcoin SV network fee yourself, on top of the amount: the wallet works it out from the size of the transaction, which grows with the number of earlier payments it spends, not from the amount you send.

The payout fee is a flat amount per payout, so it takes a larger share of a small swap, and the HYPE you get per BSV drops near the minimum.

BSV to HYPE at a glance

From live exchange data, refreshed hourly.

Item You send You receive
Asset Bitcoin SV (BSV) Hyperliquid (HyperEVM) (HYPE)
Network Bitcoin SV HyperEVM
Type Native coin Native coin
Memo / tag Not needed Not needed
Network fee (typical, checked Nov 19, 2026) - ≈ 0.00021 HYPE
Route Cross-chain: Bitcoin SV to HyperEVM
Rate Floating, estimate shown before you send
Account / ID Not needed to start a swap

How long the BSV to HYPE swap takes

The BSV to HYPE swap is three waits in a row: the Bitcoin SV network confirms your deposit, the exchange partner swaps it, and the HyperEVM network delivers the payout. Your deposit gets its first confirmation when a Bitcoin SV block includes it, and each further block makes it harder to reverse; the exchange partner swaps once it has the confirmations it requires. In rare cases the partner's compliance check pauses an order, which adds time. The stages in order:

  1. Deposit sent and seen

    Your wallet broadcasts the BSV, and the order page moves from waiting to confirming once the deposit is found.

  2. Bitcoin SV confirms the deposit

    The deposit counts as confirmed once a block includes it, and each further block adds a confirmation.

  3. Exchange and HYPE payout

    The partner swaps the BSV and sends HYPE. The status reaches sending, then finished, and the payout hash appears on the order page.

  4. Payout lands on HyperEVM

    Your wallet lists it once a HyperEVM block includes the transfer, as long as the wallet is set to HyperEVM.

Your HYPE address for the payout

A HyperEVM address is 0x followed by 40 hex characters. The swap form accepted that format in our checks. Copy the address from your wallet's receive screen, not from your transaction history, where a scammer's lookalike address can sit next to yours, and compare the first and last characters after pasting. A payout sent to a wrong address cannot be reversed. Mistakes that cost a payout:

  • An exchange address that takes this coin only on HyperCore: Hyperliquid's docs say some exchanges support HYPE from HyperCore spot balances but not on HyperEVM.
  • Hyperliquid's HYPE transfer address 0x2222222222222222222222222222222222222222: HYPE sent there goes to the HyperCore balance of the sender, which for a payout is not you.
  • A smart contract wallet address, such as a multisig, that exists on another network but not on HyperEVM: getting a payout back then depends on deploying that wallet there.

Receiving HYPE on HyperEVM: address and memo

Memo or tagNot used on this network.
Block explorerhyperevmscan.io

After the HYPE arrives

The payout is a HyperEVM transfer, so it lands in your HyperEVM balance and shows in a wallet set to HyperEVM. Hyperliquid's spot and perp balances live on HyperCore, a separate part of the same blockchain, so the payout does not appear there by itself. To trade the HYPE on Hyperliquid's order books, move it to your HyperCore spot balance with the Transfer to/from EVM button in Hyperliquid's app; that transfer costs gas in HYPE.

If the address belongs to an exchange, confirm that it accepts this coin on HyperEVM itself, not only on HyperCore, and what its minimum deposit is. To check the payout yourself, open the payout hash from the order page in a HyperEVM explorer such as hyperevmscan.io.

If your BSV deposit is slow or stuck

Look up your transaction ID on a Bitcoin SV explorer. If the explorer knows the transaction but no block includes it yet, its fee rate is probably below what miners take now, and it can wait a long time. Whether a sent transaction can get a higher fee depends on the network and on the wallet, so read your wallet's own help before you try.

If the explorer does not know the transaction at all, the network has not accepted it, for example because its fee was below the minimum that nodes relay. Check the wallet's history and any error it shows, and ask support before you send again, so the same deposit is not paid twice.

Never send the deposit a second time to speed things up: a second payment is a second deposit. If the order page has not moved on after your deposit confirmed, message @xswap_to on Telegram with the Ref. ID from the order page and your deposit hash.

What others can see of your BSV to HYPE swap

An ordinary Bitcoin SV transaction is public: anyone can look up its amount, the deposit address and the addresses it was sent from on a Bitcoin SV explorer. The payout, its amount and your receiving address are public on HyperEVM explorers such as hyperevmscan.io, where anyone can look up that address. The exchange partner that processes the swap sees both sides: your deposit and your payout address.

Before you send

  • Check the network fee in your Bitcoin SV wallet before you confirm, because a fee below what miners take now can leave the deposit waiting.
  • Copy your HYPE address from the wallet's receive screen and compare its start and end after pasting.
  • Send the amount you entered in one transaction, and let your wallet add its network fee on top.
  • Bookmark the order page and save its Ref. ID, because the Track Order list is stored only in this browser.

BSV to HYPE Frequently Asked Questions

How do I swap BSV to HYPE?

Enter the BSV amount and your HYPE address in the form at the top, press Exchange Now, and send BSV to the one-time deposit address on your order page. After the Bitcoin SV network confirms the deposit, the exchange partner sends HYPE on HyperEVM to your address. No account or email is needed.

How much HYPE do I get for 1 BSV?

Type 1 into the BSV to HYPE calculator on this page for a live estimate after fees. No figure is written here, because the rate floats and a number in the text would soon be out of date.

How long does BSV to HYPE take?

There is no set time: the Bitcoin SV network confirms the deposit first, then the exchange partner swaps it and sends the HYPE payout. The timing section on this page lists each stage, and the order page shows which one you are in.

Is there a minimum amount for BSV to HYPE?

Yes, every pair has a minimum, and it moves with network conditions. The swap form warns you when your amount is under the current one. A deposit below it cannot be swapped, and getting those coins back is not assured.

Can I swap Bitcoin SV to Hyperliquid without KYC?

You need no account, and xswap.to asks for no ID. In rare cases the exchange partner's automated anti-money-laundering screening pauses a flagged swap and asks for verification, and the order then shows the status verifying. If that happens, message @xswap_to on Telegram with your transaction ID.

Why is the HYPE I received different from the estimate?

The rate floats, so the market can move between the estimate and the moment your deposit confirms. A different deposit amount changes the payout too: if your wallet took its network fee out of the amount, less BSV arrived than you entered.

How do I swap HYPE back to BSV?

Use the HYPE to BSV page, linked next to the swap form. It works the same way in reverse: paste a Bitcoin SV address, then send HYPE to the one-time deposit address.

About these numbers

The calculator and the swap form ask for a live estimate for the amount you type; if one fails to load, try again a few seconds later. The daily rates come from xswap.to's own price record, one value per day, and show the market rate before swap fees.

Guides for this swap

Related swaps

Popular swaps