Swap MultiversX (EGLD) to Monero (XMR) with no sign-up
Enter the EGLD amount, paste a Monero address from your own wallet, then send EGLD to the one-time deposit address on your order page. Once the MultiversX network has confirmed the deposit, the exchange partner swaps it at the floating rate and sends XMR straight to your address.
Swap without creating an account or uploading ID. xswap.to never asks for your seed phrase or private keys, and the exchanged coins go straight to your wallet. In rare cases the exchange partner's compliance check can pause a swap and ask for verification.
The EGLD to XMR rate on this page is an estimate for a real swap after fees, so it reads a little lower than the ratio of the two market prices. It floats with the market until your deposit confirms.
Type any amount into the calculator below for a live figure. The table under it shows what several EGLD amounts come to in XMR after fees. It is worked out from the page's latest quote and carries that quote's time. The daily table tracks the market rate between the two coins on each recent day, before swap fees, from xswap.to's own price record.
EGLD to XMR Calculator
Enter an amount to see about how much you would receive. The estimate uses the live floating rate and already includes the payout network fee.
EGLDMultiversX
You get (estimate)
XMRMonero
Rate
1 EGLD ≈ 0.00444884 XMR
Value in USD
≈ $87.78
Network Fee
0.009 XMR
EGLD to XMR conversion table
Estimates after fees, worked out from one live quote taken at . The rate floats: the calculator and the swap form show the live figure.
Market rate before swap fees, from xswap.to's own daily price record, Nov 16, 2026 to Nov 22, 2026.
Highest0.00530145 XMR
Lowest0.00467012 XMR
Change, 6 days−11.67%
0.005301450.00467012Nov 16, 2026Nov 22, 2026
Date
Rate
1 EGLD ≈ 0.00467012 XMR
1 EGLD ≈ 0.00503619 XMR
1 EGLD ≈ 0.00478048 XMR
1 EGLD ≈ 0.00521374 XMR
1 EGLD ≈ 0.00515898 XMR
1 EGLD ≈ 0.00530145 XMR
1 EGLD ≈ 0.00528688 XMR
Live Market SnapshotUpdated Nov 22, 2026 09:55 UTC
1 EGLD price
$2.43
1 XMR price
$493.28
1 EGLD buys
0.00444884 XMR
How to swap EGLD to XMR
1
Copy your XMR address
Open your Monero wallet's Receive screen and copy a subaddress, which starts with 8; the primary address, starting with 4, works too, and both are 95 characters long. Paste it into Recipient Address and compare the first and last characters.
2
Enter the EGLD amount
Type it in the form at the top. If it is under the pair's minimum, the form shows that minimum and one tap fills it in. The XMR estimate under it already has the payout fee taken out.
3
Send EGLD to the deposit address
Press Exchange Now. Your order page shows a one-time MultiversX deposit address: send the amount you entered in one transaction. Send EGLD from a wallet that holds it on MultiversX and also holds enough of the coin the network charges its fee in, usually its own coin.
4
Follow the order until XMR arrives
The status moves from waiting to confirming, exchanging, sending and finished. Keep the transaction ID from the order page until the XMR is in your wallet.
What the EGLD to XMR swap costs
Two costs come out of the estimate before you see it: the exchange margin and the Monero network fee for your payout. You pay the MultiversX network fee for your deposit yourself, in the coin the network charges fees in, usually its own coin, and your wallet works it out when you send.
The payout fee is a flat amount per payout, so it takes a larger share of a small swap, and the XMR you get per EGLD drops near the minimum. The facts table below lists the typical network fees and the minimum with the date they were checked.
EGLD to XMR at a glance
From live exchange data, refreshed hourly.
Item
You send
You receive
Asset
MultiversX (EGLD)
Monero (XMR)
Network
MultiversX
Monero
Type
Native coin
Native coin
Memo / tag
Not needed
Not needed
Network fee (typical, checked Nov 22, 2026)
≈ 0.00005 EGLD
≈ 0.009 XMR
Route
Cross-chain: MultiversX to Monero
Rate
Floating, estimate shown before you send
Minimum to send (typical, checked Nov 22, 2026)
4.0588678 EGLD
Account / ID
Not needed to start a swap
How long the EGLD to XMR swap takes
The EGLD to XMR swap is three waits in a row: the MultiversX network confirms your deposit, the exchange partner swaps it, and the Monero network delivers the payout. The time MultiversX needs to confirm a deposit depends on the network's design and on how busy it is, and the exchange partner swaps only after the confirmations it requires. In rare cases the partner's compliance check pauses an order, which adds time. The stages in order:
1Deposit sent and seen
Your wallet broadcasts the EGLD, and the order page moves from waiting to confirming once the deposit is found.
2MultiversX confirms the deposit
When the network is busy, a deposit sent with a low fee can wait longer for its first confirmation.
3Exchange and XMR payout
The partner swaps the EGLD and sends XMR. The status reaches sending, then finished, and the payout hash appears on the order page.
4The 10-block lock ends
Once the payout is in a block, a synced wallet lists it as locked. After 10 blocks, about 20 minutes on average, the XMR counts as spendable balance.
Your XMR address for the payout
A Monero standard address is 95 characters and starts with 4. A subaddress is also 95 characters and starts with 8. An integrated address is 106 characters, starts with 4 and has a payment ID built in. The swap form accepted all three types in our checks.
Copy the address from your wallet's receive screen, not from your transaction history, where a scammer's lookalike address can sit next to yours, and compare the first and last characters after pasting. A payout sent to a wrong address cannot be reversed. Mistakes that cost a payout:
Using an exchange address that needs a separate payment ID, which this form cannot pass on.
Paying out to a new Monero wallet before writing down its seed phrase: without it, the XMR cannot be restored if the device or wallet file is lost.
On the sending side, send EGLD only on MultiversX, the network your order page names. EGLD sent on another network does not reach the deposit address. EGLD exists on more than one network, and each is a separate entry in the coin list. Choose the entry that matches the network your coins are on before you create the order.
Monero locks every received output for 10 blocks after the transaction is mined, about 20 minutes on average, and your wallet shows the amount as locked until then. It is a consensus rule of the network, not a hold by the swap, and it applies again to your change whenever you send XMR later.
A wallet that scans the chain on your device finds the payout once it is open and has synced past the payout block. If you restored the wallet from its seed, its restore height must be below the payout block, or the wallet skips the transaction. A block explorer cannot show your balance, because the payout goes to a one-time stealth address and the amount is hidden.
Use an exchange address only if that exchange still accepts XMR deposits in your region and gives you one complete address; if it asks for a separate payment ID next to a normal address, use your own wallet instead. To check the payout yourself, open the payout hash from the order page in a Monero explorer such as xmrchain.net.
If your EGLD deposit is slow or stuck
Look up the transaction ID from your wallet in a block explorer for MultiversX. If the explorer cannot find it, the transfer may never have been broadcast, so check your wallet's history first. If it is listed but not yet confirmed, the network may be busy or the fee may be below what it takes now; your wallet's help pages say whether a pending fee can be raised.
Never send the deposit a second time to speed things up: a second payment is a second deposit. If the order page has not moved on after your deposit confirmed, message @xswap_to on Telegram with the Ref. ID from the order page and your deposit hash.
What others can see of your EGLD to XMR swap
Your deposit is recorded on MultiversX for good, and on most networks its amount and both addresses can be read by anyone with a block explorer. On Monero, outside observers cannot read the payout amount or your receiving address; the chain still shows that a transaction exists, with its block and fee. The exchange partner that processes the swap sees both sides: your deposit and your payout address.
Before you send
Send EGLD only on MultiversX, the network your order page names, because a transfer on another network or to a wrong address cannot be reversed.
Copy your XMR address from the wallet's receive screen and compare its start and end after pasting.
Send the amount you entered in one transaction, and let your wallet add its network fee on top.
Bookmark the order page and save its Ref. ID, because the Track Order list is stored only in this browser.
EGLD to XMR Frequently Asked Questions
How do I swap EGLD to XMR?
Enter the EGLD amount and your XMR address in the form at the top, press Exchange Now, and send EGLD to the one-time deposit address on your order page. After the MultiversX network confirms the deposit, the exchange partner sends XMR to your address. No account or email is needed.
How much XMR do I get for 1 EGLD?
The amount table in the rate section shows it for several sizes, as an estimate after fees with the time of the quote. For your own amount, the EGLD to XMR calculator asks for a live estimate. No figure is written here, because the rate floats.
How long does EGLD to XMR take?
There is no set time: the MultiversX network confirms the deposit first, then the exchange partner swaps it and sends the XMR payout. The timing section on this page lists each stage, and the order page shows which one you are in.
Is there a minimum amount for EGLD to XMR?
Yes, every pair has a minimum, and it moves with network conditions. The facts table on this page lists the last checked figure. The swap form warns you when your amount is under the current one. A deposit below it cannot be swapped, and getting those coins back is not assured.
Can I swap MultiversX to Monero without KYC?
You need no account, and xswap.to asks for no ID. In rare cases the exchange partner's automated anti-money-laundering screening pauses a flagged swap and asks for verification, and the order then shows the status verifying. If that happens, message @xswap_to on Telegram with your transaction ID.
Why is the XMR I received different from the estimate?
The rate floats, so the market can move between the estimate and the moment your deposit confirms. A different deposit amount changes the payout too: if your wallet took its network fee out of the amount, less EGLD arrived than you entered.
How do I swap XMR back to EGLD?
Use the XMR to EGLD page, linked next to the swap form. It works the same way in reverse: paste a MultiversX address, then send XMR to the one-time deposit address.
About these numbers
The calculator and the swap form ask for a live estimate for the amount you type; if one fails to load, try again a few seconds later. The amount table is worked out from the page's latest quote and the network fees in it, so treat it as a guide and use the calculator for your own amount. The daily rates come from xswap.to's own price record, one value per day, and show the market rate before swap fees. Fees and the minimum in the facts table are typical figures with their check date.