Swap Ethereum (ETH) to Filecoin (FIL) with no sign-up
Enter the ETH amount, paste your Filecoin address from your own wallet, then send ETH to the one-time deposit address on your order page. Once the Ethereum network has confirmed the deposit, the exchange partner swaps it at the floating rate and sends FIL straight to your address.
Swap without creating an account or uploading ID. xswap.to never asks for your seed phrase or private keys, and the exchanged coins go straight to your wallet. In rare cases the exchange partner's compliance check can pause a swap and ask for verification.
The ETH to FIL rate on this page is an estimate for a real swap after fees, so it reads a little lower than the ratio of the two market prices. It floats with the market until your deposit confirms.
Type any amount into the calculator below for a live figure. The table under it shows what several ETH amounts come to in FIL after fees. It is worked out from the page's latest quote and carries that quote's time. The daily table tracks the market rate between the two coins on each recent day, before swap fees, from xswap.to's own price record.
ETH to FIL Calculator
Enter an amount to see about how much you would receive. The estimate uses the live floating rate and already includes the payout network fee.
ETHEthereum
You get (estimate)
FILFilecoin
Rate
1 ETH ≈ 3,164.74 FIL
Value in USD
≈ $1,662.51
Network Fee
0.006 FIL
ETH to FIL conversion table
Estimates after fees, worked out from one live quote taken at . The rate floats: the calculator and the swap form show the live figure.
Market rate before swap fees, from xswap.to's own daily price record, Nov 16, 2026 to Nov 22, 2026.
Highest3,252.23 FIL
Lowest2,968.34 FIL
Change, 6 days+9.56%
3,252.232,968.34Nov 16, 2026Nov 22, 2026
Date
Rate
1 ETH ≈ 3,252.23 FIL
1 ETH ≈ 3,031.77 FIL
1 ETH ≈ 3,116.33 FIL
1 ETH ≈ 3,119.2 FIL
1 ETH ≈ 3,007.91 FIL
1 ETH ≈ 2,995.57 FIL
1 ETH ≈ 2,968.34 FIL
Live Market SnapshotUpdated Nov 22, 2026 04:42 UTC
1 ETH price
$1,701.70
1 FIL price
$0.5253
1 ETH buys
3164.7412526 FIL
How to swap ETH to FIL
1
Copy your FIL address
Open your wallet's receive screen for FIL on Filecoin and copy the address it shows, after checking that the wallet names the same network. Paste it into Recipient Address and compare the first and last characters.
2
Enter the ETH amount
Type it in the form at the top. If it is under the pair's minimum, the form shows that minimum and one tap fills it in. The FIL estimate under it already has the payout fee taken out.
3
Send ETH to the deposit address
Press Exchange Now. Your order page shows a one-time Ethereum deposit address: send the amount you entered in one transaction. Send from a wallet set to Ethereum mainnet that holds enough ETH for gas, and keep the max fee it suggests.
4
Follow the order until FIL arrives
The status moves from waiting to confirming, exchanging, sending and finished. Keep the transaction ID from the order page until the FIL is in your wallet.
What the ETH to FIL swap costs
Two costs come out of the estimate before you see it: the exchange margin and the Filecoin network fee for your payout. You pay the Ethereum gas fee yourself, in ETH: the gas the transfer uses times the base fee plus a priority tip, and most wallets suggest both. The gas is paid from your ETH balance on top of the amount sent, so it does not reduce the ETH that reaches the deposit address.
The payout fee is a flat amount per payout, so it takes a larger share of a small swap, and the FIL you get per ETH drops near the minimum. The facts table below lists the typical network fees and the minimum with the date they were checked.
ETH to FIL at a glance
From live exchange data, refreshed hourly.
Item
You send
You receive
Asset
Ethereum (ETH)
Filecoin (FIL)
Network
Ethereum
Filecoin
Type
Native coin
Native coin
Memo / tag
Not needed
Not needed
Network fee (typical, checked Nov 22, 2026)
≈ 0.00006 ETH
≈ 0.006 FIL
Route
Cross-chain: Ethereum to Filecoin
Rate
Floating, estimate shown before you send
Minimum to send (typical, checked Nov 22, 2026)
0.0001363 ETH
Account / ID
Not needed to start a swap
How long the ETH to FIL swap takes
The ETH to FIL swap is three waits in a row: the Ethereum network confirms your deposit, the exchange partner swaps it, and the Filecoin network delivers the payout. Ethereum runs in 12-second slots, each with one validator chosen to propose a block, though a slot is sometimes empty; the exchange partner swaps once your deposit has the confirmations it requires. In rare cases the partner's compliance check pauses an order, which adds time. The stages in order:
1Deposit sent and seen
Your wallet broadcasts the ETH, and the order page moves from waiting to confirming once the deposit is found.
2Ethereum includes it in a block
Each 12-second slot can add a block. A deposit whose max fee is below the base fee can wait until the base fee falls or you speed it up.
3Exchange and FIL payout
The partner swaps the ETH and sends FIL. The status reaches sending, then finished, and the payout hash appears on the order page.
4Payout confirmed on Filecoin
Your wallet lists the FIL as received once Filecoin has confirmed the payout.
Your FIL address for the payout
The swap form accepted Filecoin addresses that start with f1 (the secp256k1 type) in our checks and rejected 0x addresses with 40 hex characters, so do not paste an EVM-style address.
Copy the address from your wallet's receive screen, not from your transaction history, where a scammer's lookalike address can sit next to yours, and compare the first and last characters after pasting. A payout sent to a wrong address cannot be reversed. Mistakes that cost a payout:
An address for FIL on another network: the same coin on a different network is a separate asset, and a payout sent there can be lost.
An exchange address used without the memo or tag the exchange asks for, which it needs to credit the payout to you.
A token contract address copied from an explorer instead of the address of your own wallet.
This page pays FIL. The same coin is listed on other networks too, each as its own entry in the coin list, and the links under this section open the ones open for payouts now.
Pick the entry before you press Exchange Now. The same coin on another network is a different asset to your wallet: balances do not carry over, moving it later takes another transfer, and an address on the wrong network can lose the payout. On the sending side, send ETH only on Ethereum, the network your order page names. ETH sent on another network does not reach the deposit address.
The payout is an ordinary Filecoin transaction from the exchange partner to your address. Your wallet shows it once it has seen the transaction, often as pending at first, and counts it as received once the network has confirmed it. If nothing shows, check that the wallet is set to Filecoin and, for a token, that it displays this token.
If the address belongs to an exchange, check that the exchange accepts FIL on Filecoin, what its minimum deposit is and whether it needs a memo or tag; exchanges credit deposits by their own rules. To check the payout yourself, look up the payout hash from the order page in a Filecoin block explorer.
If your ETH deposit is slow or stuck
Look up the transaction hash on Etherscan. If it is still pending, its max fee is probably below the current base fee, which rises after blocks fuller than the target, or its tip is too small for validators to pick it. It can also wait behind an earlier pending transaction from your address with a lower nonce. If your wallet offers speed up, use it on the oldest pending one: the wallet resends the same transaction with the same nonce and a higher fee, so only one of the two can confirm.
Do not press cancel on a deposit, because a cancellation that confirms means nothing reaches the order. The sped-up version has a new hash, so give that one to support. If Etherscan marks the transaction as failed, the coins stayed in your wallet but the gas was spent, so ask support before you send again. A withdrawal from an exchange account can only be sped up by that exchange.
Never send the deposit a second time to speed things up: a second payment is a second deposit. If the order page has not moved on after your deposit confirmed, message @xswap_to on Telegram with the Ref. ID from the order page and your deposit hash.
What others can see of your ETH to FIL swap
Your deposit is public on Ethereum: your sending address, the deposit address, the amount and the fee show on Etherscan and any other explorer, and they stay there. The payout is recorded on Filecoin too, where its amount and your receiving address are usually visible to anyone with a block explorer. The exchange partner that processes the swap sees both sides: your deposit and your payout address.
Before you send
Leave enough ETH in your wallet for gas on top of what you send, because Ethereum rejects a transfer whose fee the balance cannot cover.
Copy your FIL address from the wallet's receive screen and compare its start and end after pasting.
Send the amount you entered in one transaction, and let your wallet add its network fee on top.
Bookmark the order page and save its Ref. ID, because the Track Order list is stored only in this browser.
ETH to FIL Frequently Asked Questions
How do I swap ETH to FIL?
Enter the ETH amount and your FIL address in the form at the top, press Exchange Now, and send ETH to the one-time deposit address on your order page. After the Ethereum network confirms the deposit, the exchange partner sends FIL to your address. No account or email is needed.
How much FIL do I get for 1 ETH?
The amount table in the rate section shows it for several sizes, as an estimate after fees with the time of the quote. For your own amount, the ETH to FIL calculator asks for a live estimate. No figure is written here, because the rate floats.
How long does ETH to FIL take?
There is no set time: the Ethereum network confirms the deposit first, then the exchange partner swaps it and sends the FIL payout. The timing section on this page lists each stage, and the order page shows which one you are in.
Is there a minimum amount for ETH to FIL?
Yes, every pair has a minimum, and it moves with network conditions. The facts table on this page lists the last checked figure. The swap form warns you when your amount is under the current one. A deposit below it cannot be swapped, and getting those coins back is not assured.
Can I swap Ethereum to Filecoin without KYC?
You need no account, and xswap.to asks for no ID. In rare cases the exchange partner's automated anti-money-laundering screening pauses a flagged swap and asks for verification, and the order then shows the status verifying. If that happens, message @xswap_to on Telegram with your transaction ID.
Can I receive FIL on another network?
Yes, through a different entry in the coin list, since this page pays FIL. The network section on this page links to the entries open for payouts now. Pick the entry before you press Exchange Now.
Why is the FIL I received different from the estimate?
The rate floats, so the market can move between the estimate and the moment your deposit confirms. A different deposit amount changes the payout too: if your wallet took its network fee out of the amount, less ETH arrived than you entered.
How do I swap FIL back to ETH?
Use the FIL to ETH page, linked next to the swap form. It works the same way in reverse: paste an Ethereum address, then send FIL to the one-time deposit address.
About these numbers
The calculator and the swap form ask for a live estimate for the amount you type; if one fails to load, try again a few seconds later. The amount table is worked out from the page's latest quote and the network fees in it, so treat it as a guide and use the calculator for your own amount. The daily rates come from xswap.to's own price record, one value per day, and show the market rate before swap fees. Fees and the minimum in the facts table are typical figures with their check date.