Exchange Currencies Track Order Guides Telegram bot

Swap Klever (KLV) to Hyperliquid (HYPE) with no sign-up

Enter the KLV amount, paste your 0x address on HyperEVM from your own wallet, then send KLV to the one-time deposit address on your order page. Once the KLV network has confirmed the deposit, the exchange partner swaps it at the floating rate and sends HYPE on HyperEVM straight to your address.

Swap HYPE to KLV instead

Network Fee
-
Deposit Fee
-

Enter an address on the HyperEVM network. Coins sent to an address on another network can be lost.

Swap in Telegram

No Account Needed to Start

Swap without creating an account or uploading ID. xswap.to never asks for your seed phrase or private keys, and the exchanged coins go straight to your wallet. In rare cases the exchange partner's compliance check can pause a swap and ask for verification.

Updated Written and checked by the xswap.to team

KLV to HYPE exchange rate

The KLV to HYPE rate on this page is an estimate for a real swap after fees, so it reads a little lower than the ratio of the two market prices. It floats with the market until your deposit confirms.

Type any amount into the calculator below for a live figure. The daily table tracks the market rate between the two coins on each recent day, before swap fees, from xswap.to's own price record.

KLV to HYPE Calculator

Enter an amount to see about how much you would receive. The estimate uses the live floating rate and already includes the payout network fee.

KLV KLV
You get (estimate)
HYPE HyperEVM
0
Rate
-
Value in USD
-
Network Fee
-

KLV to HYPE daily rate

Market rate before swap fees, from xswap.to's own daily price record, Nov 16, 2026 to Nov 22, 2026.

Highest0.00000763051 HYPE
Lowest0.0000066965 HYPE
Change, 6 days−5.02%
0.00000763051 0.0000066965
Nov 16, 2026Nov 22, 2026
DateRate
1 KLV ≈ 0.00000724743 HYPE
1 KLV ≈ 0.0000072999 HYPE
1 KLV ≈ 0.00000673607 HYPE
1 KLV ≈ 0.00000672499 HYPE
1 KLV ≈ 0.0000066965 HYPE
1 KLV ≈ 0.00000726602 HYPE
1 KLV ≈ 0.00000763051 HYPE
Live Market Snapshot Updated Nov 22, 2026 08:07 UTC
1 KLV price
$0.00045305
1 HYPE price
$61.66

How to swap KLV to HYPE

  1. Copy your HYPE address

    Open your wallet on HyperEVM, chain ID 999, which wallets may list as Hyperliquid, and copy the 0x address from its receive screen. Paste it into Recipient Address and compare the first and last characters.

  2. Enter the KLV amount

    Type it in the form at the top. If it is under the pair's minimum, the form shows that minimum and one tap fills it in. The HYPE estimate under it already has the payout fee taken out.

  3. Send KLV to the deposit address

    Press Exchange Now. Your order page shows a one-time KLV deposit address: send the amount you entered in one transaction. Send KLV from a wallet that holds it on KLV and also holds enough of the coin the network charges its fee in, usually its own coin.

  4. Follow the order until HYPE arrives

    The status moves from waiting to confirming, exchanging, sending and finished. Keep the transaction ID from the order page until the HYPE is in your wallet.

What the KLV to HYPE swap costs

Two costs come out of the estimate before you see it: the exchange margin and the HyperEVM network fee for your payout. You pay the KLV network fee for your deposit yourself, in the coin the network charges fees in, usually its own coin, and your wallet works it out when you send.

The payout fee is a flat amount per payout, so it takes a larger share of a small swap, and the HYPE you get per KLV drops near the minimum.

KLV to HYPE at a glance

From live exchange data, refreshed hourly.

Item You send You receive
Asset Klever (KLV) Hyperliquid (HyperEVM) (HYPE)
Network KLV HyperEVM
Type Native coin Native coin
Memo / tag Not needed Not needed
Network fee (typical, checked Nov 22, 2026) - ≈ 0.00021 HYPE
Route Cross-chain: KLV to HyperEVM
Rate Floating, estimate shown before you send
Account / ID Not needed to start a swap

How long the KLV to HYPE swap takes

The KLV to HYPE swap is three waits in a row: the KLV network confirms your deposit, the exchange partner swaps it, and the HyperEVM network delivers the payout. The time KLV needs to confirm a deposit depends on the network's design and on how busy it is, and the exchange partner swaps only after the confirmations it requires. In rare cases the partner's compliance check pauses an order, which adds time. The stages in order:

  1. Deposit sent and seen

    Your wallet broadcasts the KLV, and the order page moves from waiting to confirming once the deposit is found.

  2. KLV confirms the deposit

    When the network is busy, a deposit sent with a low fee can wait longer for its first confirmation.

  3. Exchange and HYPE payout

    The partner swaps the KLV and sends HYPE. The status reaches sending, then finished, and the payout hash appears on the order page.

  4. Payout lands on HyperEVM

    Your wallet lists it once a HyperEVM block includes the transfer, as long as the wallet is set to HyperEVM.

Your HYPE address for the payout

A HyperEVM address is 0x followed by 40 hex characters. The swap form accepted that format in our checks. Copy the address from your wallet's receive screen, not from your transaction history, where a scammer's lookalike address can sit next to yours, and compare the first and last characters after pasting. A payout sent to a wrong address cannot be reversed. Mistakes that cost a payout:

  • An exchange address that takes this coin only on HyperCore: Hyperliquid's docs say some exchanges support HYPE from HyperCore spot balances but not on HyperEVM.
  • Hyperliquid's HYPE transfer address 0x2222222222222222222222222222222222222222: HYPE sent there goes to the HyperCore balance of the sender, which for a payout is not you.
  • A smart contract wallet address, such as a multisig, that exists on another network but not on HyperEVM: getting a payout back then depends on deploying that wallet there.

Receiving HYPE on HyperEVM: address and memo

Memo or tagNot used on this network.
Block explorerhyperevmscan.io

After the HYPE arrives

The payout is a HyperEVM transfer, so it lands in your HyperEVM balance and shows in a wallet set to HyperEVM. Hyperliquid's spot and perp balances live on HyperCore, a separate part of the same blockchain, so the payout does not appear there by itself. To trade the HYPE on Hyperliquid's order books, move it to your HyperCore spot balance with the Transfer to/from EVM button in Hyperliquid's app; that transfer costs gas in HYPE.

If the address belongs to an exchange, confirm that it accepts this coin on HyperEVM itself, not only on HyperCore, and what its minimum deposit is. To check the payout yourself, open the payout hash from the order page in a HyperEVM explorer such as hyperevmscan.io.

If your KLV deposit is slow or stuck

Look up the transaction ID from your wallet in a block explorer for KLV. If the explorer cannot find it, the transfer may never have been broadcast, so check your wallet's history first. If it is listed but not yet confirmed, the network may be busy or the fee may be below what it takes now; your wallet's help pages say whether a pending fee can be raised.

Never send the deposit a second time to speed things up: a second payment is a second deposit. If the order page has not moved on after your deposit confirmed, message @xswap_to on Telegram with the Ref. ID from the order page and your deposit hash.

What others can see of your KLV to HYPE swap

Your deposit is recorded on KLV for good, and on most networks its amount and both addresses can be read by anyone with a block explorer. The payout, its amount and your receiving address are public on HyperEVM explorers such as hyperevmscan.io, where anyone can look up that address. The exchange partner that processes the swap sees both sides: your deposit and your payout address.

Before you send

  • Send KLV only on KLV, the network your order page names, because a transfer on another network or to a wrong address cannot be reversed.
  • Copy your HYPE address from the wallet's receive screen and compare its start and end after pasting.
  • Send the amount you entered in one transaction, and let your wallet add its network fee on top.
  • Bookmark the order page and save its Ref. ID, because the Track Order list is stored only in this browser.

KLV to HYPE Frequently Asked Questions

How do I swap KLV to HYPE?

Enter the KLV amount and your HYPE address in the form at the top, press Exchange Now, and send KLV to the one-time deposit address on your order page. After the KLV network confirms the deposit, the exchange partner sends HYPE on HyperEVM to your address. No account or email is needed.

How much HYPE do I get for 1 KLV?

Type 1 into the KLV to HYPE calculator on this page for a live estimate after fees. No figure is written here, because the rate floats and a number in the text would soon be out of date.

How long does KLV to HYPE take?

There is no set time: the KLV network confirms the deposit first, then the exchange partner swaps it and sends the HYPE payout. The timing section on this page lists each stage, and the order page shows which one you are in.

Is there a minimum amount for KLV to HYPE?

Yes, every pair has a minimum, and it moves with network conditions. The swap form warns you when your amount is under the current one. A deposit below it cannot be swapped, and getting those coins back is not assured.

Can I swap Klever to Hyperliquid without KYC?

You need no account, and xswap.to asks for no ID. In rare cases the exchange partner's automated anti-money-laundering screening pauses a flagged swap and asks for verification, and the order then shows the status verifying. If that happens, message @xswap_to on Telegram with your transaction ID.

Why is the HYPE I received different from the estimate?

The rate floats, so the market can move between the estimate and the moment your deposit confirms. A different deposit amount changes the payout too: if your wallet took its network fee out of the amount, less KLV arrived than you entered.

How do I swap HYPE back to KLV?

Use the HYPE to KLV page, linked next to the swap form. It works the same way in reverse: paste a KLV address, then send HYPE to the one-time deposit address.

About these numbers

The calculator and the swap form ask for a live estimate for the amount you type; if one fails to load, try again a few seconds later. The daily rates come from xswap.to's own price record, one value per day, and show the market rate before swap fees.

Guides for this swap

Related swaps

Popular swaps