Exchange Currencies Track Order Guides Telegram bot

Swap Toncoin (TON) to Akash Network (AKT) with no sign-up

Enter the TON amount, paste your Akash address from your own wallet, then send TON to the one-time deposit address on your order page. Once the TON network has confirmed the deposit, the exchange partner swaps it at the floating rate and sends AKT straight to your address.

Swap AKT to TON instead

Rate
1 TON ≈ 1.8849 AKT
Network Fee
-
Deposit Fee
-

Enter an address on the Akash network. Coins sent to an address on another network can be lost.

This coin requires a memo/tag. Funds sent without it may be lost.

Swap in Telegram

No Account Needed to Start

Swap without creating an account or uploading ID. xswap.to never asks for your seed phrase or private keys, and the exchanged coins go straight to your wallet. In rare cases the exchange partner's compliance check can pause a swap and ask for verification.

Updated Written and checked by the xswap.to team

TON to AKT exchange rate

The TON to AKT rate on this page is an estimate for a real swap after fees, so it reads a little lower than the ratio of the two market prices. It floats with the market until your deposit confirms.

Type any amount into the calculator below for a live figure. The table under it shows what several TON amounts come to in AKT after fees. It is worked out from the page's latest quote and carries that quote's time. The daily table tracks the market rate between the two coins on each recent day, before swap fees, from xswap.to's own price record.

TON to AKT Calculator

Enter an amount to see about how much you would receive. The estimate uses the live floating rate and already includes the payout network fee.

TON TON
You get (estimate)
AKT Akash
188.486315 AKT
Rate
1 TON ≈ 1.88486 AKT
Value in USD
≈ $98.51
Network Fee
0.005 AKT

TON to AKT conversion table

Estimates after fees, worked out from one live quote taken at . The rate floats: the calculator and the swap form show the live figure.
You sendYou get (estimate after fees)
100 TON≈ 188.486 AKT
500 TON≈ 942.527 AKT
1,000 TON≈ 1,885.08 AKT
5,000 TON≈ 9,425.48 AKT
10,000 TON≈ 18,851 AKT

TON to AKT daily rate

Market rate before swap fees, from xswap.to's own daily price record, Nov 16, 2026 to Nov 22, 2026.

Highest2.17953 AKT
Lowest1.86684 AKT
Change, 6 days−11.98%
2.17953 1.86684
Nov 16, 2026Nov 22, 2026
DateRate
1 TON ≈ 1.86684 AKT
1 TON ≈ 1.91528 AKT
1 TON ≈ 1.89526 AKT
1 TON ≈ 1.94986 AKT
1 TON ≈ 2.07984 AKT
1 TON ≈ 2.17953 AKT
1 TON ≈ 2.12084 AKT
Live Market Snapshot Updated Nov 22, 2026 15:20 UTC
1 TON price
$1.02
1 AKT price
$0.5226
1 TON buys
1.88486315 AKT

How to swap TON to AKT

  1. Copy your AKT address

    Open your wallet's receive screen for AKT on Akash and copy the address it shows, after checking that the wallet names the same network. Paste it into Recipient Address and compare the first and last characters. If the address comes from an exchange, also enter the memo it shows with the address.

  2. Enter the TON amount

    Type it in the form at the top. If it is under the pair's minimum, the form shows that minimum and one tap fills it in. The AKT estimate under it already has the payout fee taken out.

  3. Send TON to the deposit address

    Press Exchange Now. Your order page shows a one-time TON deposit address: send the amount you entered in one transaction. Send from any TON wallet; if the order page shows a memo, use one that has a Comment field and enter the memo there.

  4. Follow the order until AKT arrives

    The status moves from waiting to confirming, exchanging, sending and finished. Keep the transaction ID from the order page until the AKT is in your wallet.

What the TON to AKT swap costs

Two costs come out of the estimate before you see it: the exchange margin and the Akash network fee for your payout. The fee for your TON deposit is paid in Gram (TON), by your wallet or, in apps with gasless transfers, by a relay service; validators set fee levels in the network configuration, so there is no higher rate to choose.

The payout fee is a flat amount per payout, so it takes a larger share of a small swap, and the AKT you get per TON drops near the minimum. The facts table below lists the typical network fees and the minimum with the date they were checked.

TON to AKT at a glance

From live exchange data, refreshed hourly.

Item You send You receive
Asset Toncoin (TON) Akash Network (AKT)
Network TON Akash
Type Native coin Native coin
Memo / tag Include the memo shown on your order page Required with your address
Network fee (typical, checked Nov 22, 2026) ≈ 0.01 TON ≈ 0.005 AKT
Route Cross-chain: TON to Akash
Rate Floating, estimate shown before you send
Minimum to send (typical, checked Nov 22, 2026) 0.105 TON
Account / ID Not needed to start a swap

How long the TON to AKT swap takes

The TON to AKT swap is three waits in a row: the TON network confirms your deposit, the exchange partner swaps it, and the Akash network delivers the payout. TON's masterchain produces a block about every 400 milliseconds, and the exchange partner swaps after your deposit has the confirmations it requires. In rare cases the partner's compliance check pauses an order, which adds time. The stages in order:

  1. Deposit sent and seen

    Your wallet broadcasts the TON, and the order page moves from waiting to confirming once the deposit is found.

  2. Masterchain block makes it final

    A TON transaction cannot be reversed once a masterchain block includes it, which takes about a second when the network runs normally.

  3. Exchange and AKT payout

    The partner swaps the TON and sends AKT. The status reaches sending, then finished, and the payout hash appears on the order page.

  4. Payout confirmed on Akash

    Your wallet lists the AKT as received once Akash has confirmed the payout.

Your AKT address for the payout

An Akash address is bech32 and starts with akash1. The swap form accepted akash1 addresses in our checks. Copy the address from your wallet's receive screen, not from your transaction history, where a scammer's lookalike address can sit next to yours, and compare the first and last characters after pasting. A payout sent to a wrong address cannot be reversed. AKT can also carry a memo. If your address comes from an exchange, enter the memo it gives you, because the exchange uses it to credit your account; a wallet you control usually needs none. Mistakes that cost a payout:

  • An address for AKT on another network: the same coin on a different network is a separate asset, and a payout sent there can be lost.
  • An exchange address used without the memo or tag the exchange asks for, which it needs to credit the payout to you.
  • A token contract address copied from an explorer instead of the address of your own wallet.

Receiving AKT on Akash: address and memo

Memo or tagNeeded when the receiving wallet asks for one, which exchange accounts usually do. Enter it in the memo field of the form.
Block explorerwww.mintscan.io

Send TON on the right network

On the sending side, send TON only on TON, the network your order page names. TON sent on another network does not reach the deposit address. TON exists on more than one network, and each is a separate entry in the coin list. Choose the entry that matches the network your coins are on before you create the order.

After the AKT arrives

The payout is an ordinary Akash transaction from the exchange partner to your address. Your wallet shows it once it has seen the transaction, often as pending at first, and counts it as received once the network has confirmed it. If nothing shows, check that the wallet is set to Akash and, for a token, that it displays this token.

If the address belongs to an exchange, check that the exchange accepts AKT on Akash, what its minimum deposit is and whether it needs a memo or tag; exchanges credit deposits by their own rules. To check the payout yourself, look up the payout hash from the order page in an Akash block explorer.

If your TON deposit is slow or stuck

A TON transfer runs as a chain of transactions, so success on your wallet's side does not prove the deposit arrived. Open your wallet's transaction in an explorer such as Tonviewer and follow it to the deposit address: a Jetton transfer with too little Gram (TON) attached can fail on the way, and a failed transfer may bounce back to you, minus fees.

If the transfer reached the deposit address but the order still says waiting, check that it carried the memo, if the order page showed one. If your wallet reports the transfer as expired or failed and the explorer shows nothing leaving your wallet, no coins were sent, and the wallet can sign a new transfer.

Never send the deposit a second time to speed things up: a second payment is a second deposit. If the order page has not moved on after your deposit confirmed, message @xswap_to on Telegram with the Ref. ID from the order page and your deposit hash.

What others can see of your TON to AKT swap

Your deposit is public on TON: the sending wallet, the deposit address, the amount and any plain text comment, the memo included, can be read by anyone in an explorer. The payout is recorded on Akash too, where its amount and your receiving address are usually visible to anyone with a block explorer. The exchange partner that processes the swap sees both sides: your deposit and your payout address.

Before you send

  • Leave some Gram (TON) in the wallet after the amount you send, because every TON transfer, Jetton transfers included, pays its fees in Gram (TON).
  • Copy your AKT address from the wallet's receive screen and compare its start and end after pasting.
  • Enter the memo your exchange gives you for AKT, or the payout cannot be credited to your account.
  • If the order page shows a memo with the deposit address, add it when you send TON, or the deposit cannot be matched.
  • Send the amount you entered in one transaction, and let your wallet add its network fee on top.
  • Bookmark the order page and save its Ref. ID, because the Track Order list is stored only in this browser.

TON to AKT Frequently Asked Questions

How do I swap TON to AKT?

Enter the TON amount and your AKT address in the form at the top, press Exchange Now, and send TON to the one-time deposit address on your order page. After the TON network confirms the deposit, the exchange partner sends AKT to your address. No account or email is needed.

How much AKT do I get for 1 TON?

The amount table in the rate section shows it for several sizes, as an estimate after fees with the time of the quote. For your own amount, the TON to AKT calculator asks for a live estimate. No figure is written here, because the rate floats.

How long does TON to AKT take?

There is no set time: the TON network confirms the deposit first, then the exchange partner swaps it and sends the AKT payout. The timing section on this page lists each stage, and the order page shows which one you are in.

Is there a minimum amount for TON to AKT?

Yes, every pair has a minimum, and it moves with network conditions. The facts table on this page lists the last checked figure. The swap form warns you when your amount is under the current one. A deposit below it cannot be swapped, and getting those coins back is not assured.

Can I swap Toncoin to Akash Network without KYC?

You need no account, and xswap.to asks for no ID. In rare cases the exchange partner's automated anti-money-laundering screening pauses a flagged swap and asks for verification, and the order then shows the status verifying. If that happens, message @xswap_to on Telegram with your transaction ID.

Do I need a memo or tag to swap TON to AKT?

For the payout, only if your AKT address belongs to an exchange: enter the memo it shows with the address. A wallet you control usually needs none. For the deposit, only if the order page shows a memo next to the deposit address: your TON must then carry it to be matched to your order.

Why is the AKT I received different from the estimate?

The rate floats, so the market can move between the estimate and the moment your deposit confirms. A different deposit amount changes the payout too: if your wallet took its network fee out of the amount, less TON arrived than you entered.

How do I swap AKT back to TON?

Use the AKT to TON page, linked next to the swap form. It works the same way in reverse: paste a TON address, then send AKT to the one-time deposit address.

About these numbers

The calculator and the swap form ask for a live estimate for the amount you type; if one fails to load, try again a few seconds later. The amount table is worked out from the page's latest quote and the network fees in it, so treat it as a guide and use the calculator for your own amount. The daily rates come from xswap.to's own price record, one value per day, and show the market rate before swap fees. Fees and the minimum in the facts table are typical figures with their check date.

Guides for this swap

Related swaps

Popular swaps