Exchange Currencies Track Order Guides Telegram bot

Swap Avalanche (AVAX) to Automata Network (ATA) with no sign-up

Enter the AVAX amount, paste an Ethereum address from your own wallet, then send AVAX on the Avalanche X-Chain to the one-time deposit address on your order page. Once the Avalanche X-Chain network has confirmed the deposit, the exchange partner swaps it at the floating rate and sends ATA on Ethereum straight to your address.

Swap ATA to AVAX instead

Network Fee
-
Deposit Fee
-

Enter an address on the Ethereum (ERC-20) network. Coins sent to an address on another network can be lost.

Swap in Telegram

No Account Needed to Start

Swap without creating an account or uploading ID. xswap.to never asks for your seed phrase or private keys, and the exchanged coins go straight to your wallet. In rare cases the exchange partner's compliance check can pause a swap and ask for verification.

Updated Written and checked by the xswap.to team

AVAX to ATA exchange rate

The AVAX to ATA rate on this page is an estimate for a real swap after fees, so it reads a little lower than the ratio of the two market prices. It floats with the market until your deposit confirms. Type any amount into the calculator below for a live figure.

AVAX to ATA Calculator

Enter an amount to see about how much you would receive. The estimate uses the live floating rate and already includes the payout network fee.

AVAX Avalanche X-Chain
You get (estimate)
ATA Ethereum ERC-20
0
Rate
-
Network Fee
-
Live Market Snapshot Updated Nov 22, 2026 08:33 UTC
1 AVAX price
$6.78

How to swap AVAX to ATA

  1. Copy your ATA address

    Open your wallet with Ethereum mainnet selected and copy your 0x address from its receive screen; ETH and every ERC-20 token use that one address. Paste it into Recipient Address and compare the first and last characters.

  2. Enter the AVAX amount

    Type it in the form at the top. If it is under the pair's minimum, the form shows that minimum and one tap fills it in. The ATA estimate under it already has the payout fee taken out.

  3. Send AVAX to the deposit address

    Press Exchange Now. Your order page shows a one-time Avalanche X-Chain deposit address: send the amount you entered in one transaction. Send AVAX from your wallet's X-Chain balance, not from the C-Chain, and leave some AVAX there for the fixed network fee.

  4. Follow the order until ATA arrives

    The status moves from waiting to confirming, exchanging, sending and finished. Keep the transaction ID from the order page until the ATA is in your wallet.

What the AVAX to ATA swap costs

Two costs come out of the estimate before you see it: the exchange margin and the Ethereum network fee for your payout. You pay the X-Chain network fee yourself, in AVAX: it is a fixed amount per transaction, set by the protocol and burned, so your wallet adds it without a fee rate to choose.

The payout fee is a flat amount per payout, so it takes a larger share of a small swap, and the ATA you get per AVAX drops near the minimum. The facts table below lists the typical network fees and the minimum with the date they were checked.

AVAX to ATA at a glance

From live exchange data, refreshed hourly.

Item You send You receive
Asset Avalanche (AVAX) Automata Network (ATA)
Network Avalanche X-Chain Ethereum
Type Native coin ERC-20 token
Contract - 0xa2120b…141225
Memo / tag Not needed Not needed
Network fee (typical, checked Nov 22, 2026) ≈ 0.01 AVAX -
Route Cross-chain: Avalanche X-Chain to Ethereum
Rate Floating, estimate shown before you send
Minimum to send (typical, checked Nov 22, 2026) 0.02205 AVAX
Account / ID Not needed to start a swap

How long the AVAX to ATA swap takes

The AVAX to ATA swap is three waits in a row: the Avalanche X-Chain network confirms your deposit, the exchange partner swaps it, and the Ethereum network delivers the payout. On the Avalanche X-Chain, validators accept a block once repeated rounds of polling each other agree on it, and an accepted block is final; the exchange partner swaps after your deposit has the confirmations it requires. In rare cases the partner's compliance check pauses an order, which adds time. The stages in order:

  1. Deposit sent and seen

    Your wallet broadcasts the AVAX, and the order page moves from waiting to confirming once the deposit is found.

  2. X-Chain validators accept it

    Once validators accept the block that holds your deposit, the transfer is final.

  3. Exchange and ATA payout

    The partner swaps the AVAX and sends ATA. The status reaches sending, then finished, and the payout hash appears on the order page.

  4. Payout final on Ethereum

    Your wallet shows the payout once it is in a block. About 15 minutes later, two epochs on, Ethereum finalizes that block.

Your ATA address for the payout

An Ethereum address is 0x followed by 40 hexadecimal characters, 42 in total. Mixed-case letters are a checksum (EIP-55), not a different address.

Copy the address from your wallet's receive screen, not from your transaction history, where a scammer's lookalike address can sit next to yours, and compare the first and last characters after pasting. A payout sent to a wrong address cannot be reversed. Mistakes that cost a payout:

  • An exchange deposit address meant for ATA on another network, such as BNB Smart Chain or Base: the exchange may not credit a payout on Ethereum.
  • A token contract address copied from Etherscan instead of your own wallet address: tokens sent to a contract that cannot handle them can be lost.
  • A smart contract wallet such as a Safe, which exists only on networks where it was deployed and can fail to receive ETH from some contracts.

Receiving ATA on Ethereum: address and memo

Memo or tagNot used on this network.
Block exploreretherscan.io

More about swapping on Ethereum

Which network your ATA arrives on

This page pays ATA on Ethereum. The same coin is listed on other networks too, each as its own entry in the coin list, and the links under this section open the ones open for payouts now.

Pick the entry before you press Exchange Now. The same coin on another network is a different asset to your wallet: balances do not carry over, moving it later takes another transfer, and an address on the wrong network can lose the payout. On the sending side, send AVAX only on the Avalanche X-Chain, the network your order page names. AVAX sent on another network does not reach the deposit address.

After the ATA arrives

The payout shows in your wallet once a block includes it, and you can use it from then on. Ethereum finalizes a block after two epochs of 32 slots, about 15 minutes, and after that only a network attack costing many billions of dollars could change it. You need no ETH to receive the payout, because the sender pays the gas. Moving the ATA later costs gas paid in ETH, so keep some ETH at the same address. If the token does not show in your wallet, add it by its contract address.

If the address belongs to an exchange, check that the exchange credits ATA on Ethereum at that address and what its minimum deposit is; a deposit below the minimum or on a network it does not support may not be credited. To check the payout yourself, open the payout hash from the order page in an Ethereum explorer such as Etherscan.

If your AVAX deposit is slow or stuck

Look up the transaction ID on the X-Chain pages of the Avalanche Explorer. The X-Chain charges a fixed fee per transaction, so there is no fee to raise when a deposit waits, and once validators accept the transaction it is final. If the explorer shows nothing, check in your wallet that the transfer left your X-Chain balance and was not sent on another chain.

AVAX held on the C-Chain under an 0x address cannot pay this deposit. A wallet that supports both chains moves it across in two transactions, an export from the C-Chain and an import on the X-Chain, each with its own fee. If the import step never completed, the AVAX waits between the chains until you finish it.

Never send the deposit a second time to speed things up: a second payment is a second deposit. If the order page has not moved on after your deposit confirmed, message @xswap_to on Telegram with the Ref. ID from the order page and your deposit hash.

What others can see of your AVAX to ATA swap

Your deposit is public: the amount and the X-Chain addresses on both sides stay on the chain, where anyone can look them up on the Avalanche Explorer. The payout, its amount and your 0x address are public on Etherscan, and so is everything that address does later on Ethereum. The exchange partner that processes the swap sees both sides: your deposit and your payout address.

Before you send

  • Check that your wallet sends from its X-Chain balance, because AVAX on the C-Chain or another network cannot reach this deposit address.
  • Copy your ATA address from the wallet's receive screen and compare its start and end after pasting.
  • Send the amount you entered in one transaction, and let your wallet add its network fee on top.
  • Bookmark the order page and save its Ref. ID, because the Track Order list is stored only in this browser.

AVAX to ATA Frequently Asked Questions

How do I swap AVAX to ATA?

Enter the AVAX amount and your ATA address in the form at the top, press Exchange Now, and send AVAX on the Avalanche X-Chain to the one-time deposit address on your order page. After the Avalanche X-Chain network confirms the deposit, the exchange partner sends ATA on Ethereum to your address. No account or email is needed.

How much ATA do I get for 1 AVAX?

Type 1 into the AVAX to ATA calculator on this page for a live estimate after fees. No figure is written here, because the rate floats and a number in the text would soon be out of date.

How long does AVAX to ATA take?

There is no set time: the Avalanche X-Chain network confirms the deposit first, then the exchange partner swaps it and sends the ATA payout. The timing section on this page lists each stage, and the order page shows which one you are in.

Is there a minimum amount for AVAX to ATA?

Yes, every pair has a minimum, and it moves with network conditions. The facts table on this page lists the last checked figure. The swap form warns you when your amount is under the current one. A deposit below it cannot be swapped, and getting those coins back is not assured.

Can I swap Avalanche to Automata Network without KYC?

You need no account, and xswap.to asks for no ID. In rare cases the exchange partner's automated anti-money-laundering screening pauses a flagged swap and asks for verification, and the order then shows the status verifying. If that happens, message @xswap_to on Telegram with your transaction ID.

Can I receive ATA on another network?

Yes, through a different entry in the coin list, since this page pays ATA on Ethereum. The network section on this page links to the entries open for payouts now. Pick the entry before you press Exchange Now.

Why is the ATA I received different from the estimate?

The rate floats, so the market can move between the estimate and the moment your deposit confirms. A different deposit amount changes the payout too: if your wallet took its network fee out of the amount, less AVAX arrived than you entered.

How do I swap ATA back to AVAX?

Use the ATA to AVAX page, linked next to the swap form. It works the same way in reverse: paste an Avalanche X-Chain address, then send ATA to the one-time deposit address.

About these numbers

The calculator and the swap form ask for a live estimate for the amount you type; if one fails to load, try again a few seconds later. Fees and the minimum in the facts table are typical figures with their check date.

Guides for this swap

Related swaps

Popular swaps