Exchange Currencies Track Order Guides Telegram bot

Swap Avalanche (AVAX) to Brett (BRETT) with no sign-up

Enter the AVAX amount, paste your 0x address on Base from your own wallet, then send AVAX on the Avalanche X-Chain to the one-time deposit address on your order page. Once the Avalanche X-Chain network has confirmed the deposit, the exchange partner swaps it at the floating rate and sends BRETT on Base straight to your address.

Swap BRETT to AVAX instead

Rate
1 AVAX ≈ 2,035.6707 BRETT
Network Fee
-
Deposit Fee
-

Enter an address on the Base (ERC-20) network. Coins sent to an address on another network can be lost.

Swap in Telegram

No Account Needed to Start

Swap without creating an account or uploading ID. xswap.to never asks for your seed phrase or private keys, and the exchanged coins go straight to your wallet. In rare cases the exchange partner's compliance check can pause a swap and ask for verification.

Updated Written and checked by the xswap.to team

AVAX to BRETT exchange rate

The AVAX to BRETT rate on this page is an estimate for a real swap after fees, so it reads a little lower than the ratio of the two market prices. It floats with the market until your deposit confirms.

Type any amount into the calculator below for a live figure. The table under it shows what several AVAX amounts come to in BRETT after fees. It is worked out from the page's latest quote and carries that quote's time. The daily table tracks the market rate between the two coins on each recent day, before swap fees, from xswap.to's own price record.

AVAX to BRETT Calculator

Enter an amount to see about how much you would receive. The estimate uses the live floating rate and already includes the payout network fee.

AVAX Avalanche X-Chain
You get (estimate)
BRETT Base ERC-20
20,356.7066154 BRETT
Rate
1 AVAX ≈ 2,035.67 BRETT
Value in USD
≈ $69.15
Network Fee
0.2688934 BRETT

AVAX to BRETT conversion table

Estimates after fees, worked out from one live quote taken at . The rate floats: the calculator and the swap form show the live figure.
You sendYou get (estimate after fees)
10 AVAX≈ 20,356.7 BRETT
50 AVAX≈ 101,866 BRETT
100 AVAX≈ 203,753 BRETT
500 AVAX≈ 1,018,847 BRETT
1,000 AVAX≈ 2,037,715 BRETT
5,000 AVAX≈ 10,188,656 BRETT

AVAX to BRETT daily rate

Market rate before swap fees, from xswap.to's own daily price record, Nov 16, 2026 to Nov 22, 2026.

Highest2,111.8 BRETT
Lowest1,657.97 BRETT
Change, 6 days−21.49%
2,111.8 1,657.97
Nov 16, 2026Nov 22, 2026
DateRate
1 AVAX ≈ 1,657.97 BRETT
1 AVAX ≈ 1,924.34 BRETT
1 AVAX ≈ 1,943.46 BRETT
1 AVAX ≈ 2,013.16 BRETT
1 AVAX ≈ 2,065.16 BRETT
1 AVAX ≈ 2,015.8 BRETT
1 AVAX ≈ 2,111.8 BRETT
Live Market Snapshot Updated Nov 22, 2026 10:56 UTC
1 AVAX price
$6.87
1 BRETT price
$0.00339671
1 AVAX buys
2035.67066154 BRETT

How to swap AVAX to BRETT

  1. Copy your BRETT address

    Open your wallet with Base selected as the network and copy the 0x address from its receive screen. Paste it into Recipient Address and compare the first and last characters.

  2. Enter the AVAX amount

    Type it in the form at the top. If it is under the pair's minimum, the form shows that minimum and one tap fills it in. The BRETT estimate under it already has the payout fee taken out.

  3. Send AVAX to the deposit address

    Press Exchange Now. Your order page shows a one-time Avalanche X-Chain deposit address: send the amount you entered in one transaction. Send AVAX from your wallet's X-Chain balance, not from the C-Chain, and leave some AVAX there for the fixed network fee.

  4. Follow the order until BRETT arrives

    The status moves from waiting to confirming, exchanging, sending and finished. Keep the transaction ID from the order page until the BRETT is in your wallet.

What the AVAX to BRETT swap costs

Two costs come out of the estimate before you see it: the exchange margin and the Base network fee for your payout. You pay the X-Chain network fee yourself, in AVAX: it is a fixed amount per transaction, set by the protocol and burned, so your wallet adds it without a fee rate to choose.

The payout fee is a flat amount per payout, so it takes a larger share of a small swap, and the BRETT you get per AVAX drops near the minimum. The facts table below lists the typical network fees and the minimum with the date they were checked.

AVAX to BRETT at a glance

From live exchange data, refreshed hourly.

Item You send You receive
Asset Avalanche (AVAX) Brett (Based) (BRETT)
Network Avalanche X-Chain Base
Type Native coin ERC-20 token
Contract - 0x532f27…b142e4
Memo / tag Not needed Not needed
Network fee (typical, checked Nov 22, 2026) ≈ 0.01 AVAX ≈ 0.2689 BRETT
Route Cross-chain: Avalanche X-Chain to Base
Rate Floating, estimate shown before you send
Minimum to send (typical, checked Nov 22, 2026) 0.0223276 AVAX
Account / ID Not needed to start a swap

How long the AVAX to BRETT swap takes

The AVAX to BRETT swap is three waits in a row: the Avalanche X-Chain network confirms your deposit, the exchange partner swaps it, and the Base network delivers the payout. On the Avalanche X-Chain, validators accept a block once repeated rounds of polling each other agree on it, and an accepted block is final; the exchange partner swaps after your deposit has the confirmations it requires. In rare cases the partner's compliance check pauses an order, which adds time. The stages in order:

  1. Deposit sent and seen

    Your wallet broadcasts the AVAX, and the order page moves from waiting to confirming once the deposit is found.

  2. X-Chain validators accept it

    Once validators accept the block that holds your deposit, the transfer is final.

  3. Exchange and BRETT payout

    The partner swaps the AVAX and sends BRETT. The status reaches sending, then finished, and the payout hash appears on the order page.

  4. Payout lands on Base

    Your wallet lists it once a Base block includes the transaction, as long as the wallet is set to Base.

Your BRETT address for the payout

Base uses the Ethereum address format: 0x followed by 40 hexadecimal characters. Copy the address from your wallet's receive screen, not from your transaction history, where a scammer's lookalike address can sit next to yours, and compare the first and last characters after pasting. A payout sent to a wrong address cannot be reversed. Mistakes that cost a payout:

  • An exchange deposit address meant for Ethereum mainnet or another layer 2 such as OP Mainnet: the payout is sent on Base, a separate chain.
  • An address at a wallet or exchange that does not support Base, which then cannot show or credit the payout.
  • A smart contract wallet address, such as a multisig, that exists on another network but not on Base: getting a payout back then depends on deploying that wallet there.
  • A token contract address copied from Basescan instead of your own wallet address: tokens sent to a contract that cannot handle them can be stuck for good.

Receiving BRETT on Base: address and memo

Memo or tagNot used on this network.
Block explorerbasescan.org

More about swapping on Base

Send AVAX on the right network

On the sending side, send AVAX only on the Avalanche X-Chain, the network your order page names. AVAX sent on another network does not reach the deposit address. AVAX exists on more than one network, and each is a separate entry in the coin list. Choose the entry that matches the network your coins are on before you create the order.

After the BRETT arrives

The payout is a Base transaction, not an Ethereum mainnet one, so a wallet set to Ethereum shows nothing of it; switch yours to Base. The coins can be moved again once the transaction is in a block, and transfers within Base do not wait for the window that applies to withdrawals to Ethereum.

Moving the payout to Ethereum mainnet later takes a bridge. Through Base's standard bridge, a withdrawal can be finalized on Ethereum only after a window of 5 days, or 1 day when both of Base's proof systems back it, and proving and finalizing it are transactions on Ethereum. Your wallet may list the BRETT only after you add the token, and moving it later costs gas in ETH on Base, so keep some ETH there.

If the address belongs to an exchange, check that it accepts this coin on Base and what its minimum deposit is; for a token, check the contract address it accepts, not only the ticker. To check the payout yourself, open the payout hash from the order page in a Base explorer such as Basescan.

If your AVAX deposit is slow or stuck

Look up the transaction ID on the X-Chain pages of the Avalanche Explorer. The X-Chain charges a fixed fee per transaction, so there is no fee to raise when a deposit waits, and once validators accept the transaction it is final. If the explorer shows nothing, check in your wallet that the transfer left your X-Chain balance and was not sent on another chain.

AVAX held on the C-Chain under an 0x address cannot pay this deposit. A wallet that supports both chains moves it across in two transactions, an export from the C-Chain and an import on the X-Chain, each with its own fee. If the import step never completed, the AVAX waits between the chains until you finish it.

Never send the deposit a second time to speed things up: a second payment is a second deposit. If the order page has not moved on after your deposit confirmed, message @xswap_to on Telegram with the Ref. ID from the order page and your deposit hash.

What others can see of your AVAX to BRETT swap

Your deposit is public: the amount and the X-Chain addresses on both sides stay on the chain, where anyone can look them up on the Avalanche Explorer. The payout, its amount and your receiving address are public on Basescan, where anyone who knows the address can see its whole history on Base. The exchange partner that processes the swap sees both sides: your deposit and your payout address.

Before you send

  • Check that your wallet sends from its X-Chain balance, because AVAX on the C-Chain or another network cannot reach this deposit address.
  • Copy your BRETT address from the wallet's receive screen and compare its start and end after pasting.
  • Send the amount you entered in one transaction, and let your wallet add its network fee on top.
  • Bookmark the order page and save its Ref. ID, because the Track Order list is stored only in this browser.

AVAX to BRETT Frequently Asked Questions

How do I swap AVAX to BRETT?

Enter the AVAX amount and your BRETT address in the form at the top, press Exchange Now, and send AVAX on the Avalanche X-Chain to the one-time deposit address on your order page. After the Avalanche X-Chain network confirms the deposit, the exchange partner sends BRETT on Base to your address. No account or email is needed.

How much BRETT do I get for 1 AVAX?

The amount table in the rate section shows it for several sizes, as an estimate after fees with the time of the quote. For your own amount, the AVAX to BRETT calculator asks for a live estimate. No figure is written here, because the rate floats.

How long does AVAX to BRETT take?

There is no set time: the Avalanche X-Chain network confirms the deposit first, then the exchange partner swaps it and sends the BRETT payout. The timing section on this page lists each stage, and the order page shows which one you are in.

Is there a minimum amount for AVAX to BRETT?

Yes, every pair has a minimum, and it moves with network conditions. The facts table on this page lists the last checked figure. The swap form warns you when your amount is under the current one. A deposit below it cannot be swapped, and getting those coins back is not assured.

Can I swap Avalanche to Brett without KYC?

You need no account, and xswap.to asks for no ID. In rare cases the exchange partner's automated anti-money-laundering screening pauses a flagged swap and asks for verification, and the order then shows the status verifying. If that happens, message @xswap_to on Telegram with your transaction ID.

Why is the BRETT I received different from the estimate?

The rate floats, so the market can move between the estimate and the moment your deposit confirms. A different deposit amount changes the payout too: if your wallet took its network fee out of the amount, less AVAX arrived than you entered.

How do I swap BRETT back to AVAX?

Use the BRETT to AVAX page, linked next to the swap form. It works the same way in reverse: paste an Avalanche X-Chain address, then send BRETT to the one-time deposit address.

About these numbers

The calculator and the swap form ask for a live estimate for the amount you type; if one fails to load, try again a few seconds later. The amount table is worked out from the page's latest quote and the network fees in it, so treat it as a guide and use the calculator for your own amount. The daily rates come from xswap.to's own price record, one value per day, and show the market rate before swap fees. Fees and the minimum in the facts table are typical figures with their check date.

Guides for this swap

Related swaps

Popular swaps