Exchange Currencies Track Order Guides Telegram bot

Swap Band (BAND) to World Liberty Financial USD (USD1) with no sign-up

Enter the BAND amount, paste an Ethereum address from your own wallet, then send BAND to the one-time deposit address on your order page. Once the BandChain network has confirmed the deposit, the exchange partner swaps it at the floating rate and sends USD1 on Ethereum straight to your address.

Swap USD1 to BAND instead

Network Fee
-
Deposit Fee
-

Enter an address on the Ethereum (ERC-20) network. Coins sent to an address on another network can be lost.

Swap in Telegram

No Account Needed to Start

Swap without creating an account or uploading ID. xswap.to never asks for your seed phrase or private keys, and the exchanged coins go straight to your wallet. In rare cases the exchange partner's compliance check can pause a swap and ask for verification.

Updated Written and checked by the xswap.to team

BAND to USD1 exchange rate

The BAND to USD1 rate on this page is an estimate for a real swap after fees, so it reads a little lower than the ratio of the two market prices. It floats with the market until your deposit confirms. Type any amount into the calculator below for a live figure.

BAND to USD1 Calculator

Enter an amount to see about how much you would receive. The estimate uses the live floating rate and already includes the payout network fee.

BAND BandChain
You get (estimate)
USD1 Ethereum ERC-20
0
Rate
-
Value in USD
-
Network Fee
-
Live Market Snapshot Updated Nov 22, 2026 09:44 UTC
1 BAND price
$0.2026
1 USD1 price
$1.02

How to swap BAND to USD1

  1. Copy your USD1 address

    Open your wallet with Ethereum mainnet selected and copy your 0x address from its receive screen; ETH and every ERC-20 token use that one address. Paste it into Recipient Address and compare the first and last characters.

  2. Enter the BAND amount

    Type it in the form at the top. If it is under the pair's minimum, the form shows that minimum and one tap fills it in. The USD1 estimate under it already has the payout fee taken out.

  3. Send BAND to the deposit address

    Press Exchange Now. Your order page shows a one-time BandChain deposit address: send the amount you entered in one transaction. Send BAND from a wallet that holds it on BandChain and also holds enough of the coin the network charges its fee in, usually its own coin. If the order page shows a memo next to the deposit address, add it to your transfer, because a deposit without it cannot be matched to your order.

  4. Follow the order until USD1 arrives

    The status moves from waiting to confirming, exchanging, sending and finished. Keep the transaction ID from the order page until the USD1 is in your wallet.

What the BAND to USD1 swap costs

Two costs come out of the estimate before you see it: the exchange margin and the Ethereum network fee for your payout. You pay the BandChain network fee for your deposit yourself, in the coin the network charges fees in, usually its own coin, and your wallet works it out when you send.

The payout fee is a flat amount per payout, so it takes a larger share of a small swap, and the USD1 you get per BAND drops near the minimum. The facts table below lists the typical network fees and the minimum with the date they were checked.

BAND to USD1 at a glance

From live exchange data, refreshed hourly.

Item You send You receive
Asset Band (Mainnet) (BAND) World Liberty Financial USD (Ethereum) (USD1)
Network BandChain Ethereum
Type Native coin ERC-20 token
Contract - 0x8d0D00…f08B0d
Memo / tag Include the memo shown on your order page Not needed
Network fee (typical, checked Nov 22, 2026) - ≈ 0.08392 USD1
Route Cross-chain: BandChain to Ethereum
Rate Floating, estimate shown before you send
Minimum to send (typical, checked Nov 22, 2026) 0.005513 BAND
Account / ID Not needed to start a swap

How long the BAND to USD1 swap takes

The BAND to USD1 swap is three waits in a row: the BandChain network confirms your deposit, the exchange partner swaps it, and the Ethereum network delivers the payout. The time BandChain needs to confirm a deposit depends on the network's design and on how busy it is, and the exchange partner swaps only after the confirmations it requires. In rare cases the partner's compliance check pauses an order, which adds time. The stages in order:

  1. Deposit sent and seen

    Your wallet broadcasts the BAND, and the order page moves from waiting to confirming once the deposit is found.

  2. BandChain confirms the deposit

    When the network is busy, a deposit sent with a low fee can wait longer for its first confirmation.

  3. Exchange and USD1 payout

    The partner swaps the BAND and sends USD1. The status reaches sending, then finished, and the payout hash appears on the order page.

  4. Payout final on Ethereum

    Your wallet shows the payout once it is in a block. About 15 minutes later, two epochs on, Ethereum finalizes that block.

Your USD1 address for the payout

An Ethereum address is 0x followed by 40 hexadecimal characters, 42 in total. Mixed-case letters are a checksum (EIP-55), not a different address.

Copy the address from your wallet's receive screen, not from your transaction history, where a scammer's lookalike address can sit next to yours, and compare the first and last characters after pasting. A payout sent to a wrong address cannot be reversed. Mistakes that cost a payout:

  • An exchange deposit address meant for USD1 on another network, such as BNB Smart Chain or Base: the exchange may not credit a payout on Ethereum.
  • A token contract address copied from Etherscan instead of your own wallet address: tokens sent to a contract that cannot handle them can be lost.
  • A smart contract wallet such as a Safe, which exists only on networks where it was deployed and can fail to receive ETH from some contracts.

Receiving USD1 on Ethereum: address and memo

Memo or tagNot used on this network.
Block exploreretherscan.io

More about swapping on Ethereum

Which network your USD1 arrives on

This page pays USD1 on Ethereum. The same coin is listed on other networks too, each as its own entry in the coin list, and the links under this section open the ones open for payouts now.

Pick the entry before you press Exchange Now. The same coin on another network is a different asset to your wallet: balances do not carry over, moving it later takes another transfer, and an address on the wrong network can lose the payout. On the sending side, send BAND only on BandChain, the network your order page names. BAND sent on another network does not reach the deposit address.

After the USD1 arrives

The payout shows in your wallet once a block includes it, and you can use it from then on. Ethereum finalizes a block after two epochs of 32 slots, about 15 minutes, and after that only a network attack costing many billions of dollars could change it. You need no ETH to receive the payout, because the sender pays the gas. Moving the USD1 later costs gas paid in ETH, so keep some ETH at the same address. If the token does not show in your wallet, add it by its contract address.

If the address belongs to an exchange, check that the exchange credits USD1 on Ethereum at that address and what its minimum deposit is; a deposit below the minimum or on a network it does not support may not be credited. To check the payout yourself, open the payout hash from the order page in an Ethereum explorer such as Etherscan.

If your BAND deposit is slow or stuck

Look up the transaction ID from your wallet in a block explorer for BandChain. If the explorer cannot find it, the transfer may never have been broadcast, so check your wallet's history first. If it is listed but not yet confirmed, the network may be busy or the fee may be below what it takes now; your wallet's help pages say whether a pending fee can be raised.

Never send the deposit a second time to speed things up: a second payment is a second deposit. If the order page has not moved on after your deposit confirmed, message @xswap_to on Telegram with the Ref. ID from the order page and your deposit hash.

What others can see of your BAND to USD1 swap

Your deposit is recorded on BandChain for good, and on most networks its amount and both addresses can be read by anyone with a block explorer. The payout, its amount and your 0x address are public on Etherscan, and so is everything that address does later on Ethereum. The exchange partner that processes the swap sees both sides: your deposit and your payout address.

Before you send

  • Send BAND only on BandChain, the network your order page names, because a transfer on another network or to a wrong address cannot be reversed.
  • Copy your USD1 address from the wallet's receive screen and compare its start and end after pasting.
  • Send the amount you entered in one transaction, and let your wallet add its network fee on top.
  • Bookmark the order page and save its Ref. ID, because the Track Order list is stored only in this browser.

BAND to USD1 Frequently Asked Questions

How do I swap BAND to USD1?

Enter the BAND amount and your USD1 address in the form at the top, press Exchange Now, and send BAND to the one-time deposit address on your order page. After the BandChain network confirms the deposit, the exchange partner sends USD1 on Ethereum to your address. No account or email is needed.

How much USD1 do I get for 1 BAND?

Type 1 into the BAND to USD1 calculator on this page for a live estimate after fees. No figure is written here, because the rate floats and a number in the text would soon be out of date.

How long does BAND to USD1 take?

There is no set time: the BandChain network confirms the deposit first, then the exchange partner swaps it and sends the USD1 payout. The timing section on this page lists each stage, and the order page shows which one you are in.

Is there a minimum amount for BAND to USD1?

Yes, every pair has a minimum, and it moves with network conditions. The facts table on this page lists the last checked figure. The swap form warns you when your amount is under the current one. A deposit below it cannot be swapped, and getting those coins back is not assured.

Can I swap Band to World Liberty Financial USD without KYC?

You need no account, and xswap.to asks for no ID. In rare cases the exchange partner's automated anti-money-laundering screening pauses a flagged swap and asks for verification, and the order then shows the status verifying. If that happens, message @xswap_to on Telegram with your transaction ID.

Do I need a memo or tag to swap BAND to USD1?

For the deposit, only if the order page shows a memo next to the deposit address: your BAND must then carry it to be matched to your order.

Can I receive USD1 on another network?

Yes, through a different entry in the coin list, since this page pays USD1 on Ethereum. The network section on this page links to the entries open for payouts now. Pick the entry before you press Exchange Now.

Why is the USD1 I received different from the estimate?

The rate floats, so the market can move between the estimate and the moment your deposit confirms. A different deposit amount changes the payout too: if your wallet took its network fee out of the amount, less BAND arrived than you entered.

How do I swap USD1 back to BAND?

Use the USD1 to BAND page, linked next to the swap form. It works the same way in reverse: paste a BandChain address, then send USD1 to the one-time deposit address.

About these numbers

The calculator and the swap form ask for a live estimate for the amount you type; if one fails to load, try again a few seconds later. Fees and the minimum in the facts table are typical figures with their check date.

Guides for this swap

Related swaps

Popular swaps