Exchange Currencies Track Order Guides Telegram bot

Swap BugsCoin (BGSC) to Chainlink (LINK) with no sign-up

Enter the BGSC amount, paste your 0x address on Arbitrum One from your own wallet, then send BGSC on BNB Smart Chain to the one-time deposit address on your order page. Once the BNB Smart Chain network has confirmed the deposit, the exchange partner swaps it at the floating rate and sends LINK on Arbitrum One straight to your address.

Swap LINK to BGSC instead

Rate
1 BGSC ā‰ˆ 0.0000556571 LINK
Network Fee
-
Deposit Fee
-

Enter an address on the Arbitrum One (ERC-20) network. Coins sent to an address on another network can be lost.

Swap in Telegram

No Account Needed to Start

Swap without creating an account or uploading ID. xswap.to never asks for your seed phrase or private keys, and the exchanged coins go straight to your wallet. In rare cases the exchange partner's compliance check can pause a swap and ask for verification.

Updated Written and checked by the xswap.to team

BGSC to LINK exchange rate

The BGSC to LINK rate on this page is an estimate for a real swap after fees, so it reads a little lower than the ratio of the two market prices. It floats with the market until your deposit confirms.

Type any amount into the calculator below for a live figure. The table under it shows what several BGSC amounts come to in LINK after fees. It is worked out from the page's latest quote and carries that quote's time. The daily table tracks the market rate between the two coins on each recent day, before swap fees, from xswap.to's own price record.

BGSC to LINK Calculator

Enter an amount to see about how much you would receive. The estimate uses the live floating rate and already includes the payout network fee.

BGSC BNB Chain BEP-20
You get (estimate)
LINK Arbitrum ERC-20
11.1314117 LINK
Rate
1 BGSC ā‰ˆ 0.0000556571 LINK
Value in USD
ā‰ˆ $100.40
Network Fee
0.0030976 LINK

BGSC to LINK conversion table

Estimates after fees, worked out from one live quote taken at . The rate floats: the calculator and the swap form show the live figure.
You sendYou get (estimate after fees)
100,000 BGSCā‰ˆ 5.56229 LINK
500,000 BGSCā‰ˆ 27.8388 LINK
1,000,000 BGSCā‰ˆ 55.6844 LINK
5,000,000 BGSCā‰ˆ 278.449 LINK
10,000,000 BGSCā‰ˆ 556.905 LINK
50,000,000 BGSCā‰ˆ 2,784.55 LINK

BGSC to LINK daily rate

Market rate before swap fees, from xswap.to's own daily price record, Nov 16, 2026 to Nov 22, 2026.

Highest0.0000576541 LINK
Lowest0.0000498447 LINK
Change, 6 daysāˆ’6.42%
0.0000576541 0.0000498447
Nov 16, 2026Nov 22, 2026
DateRate
1 BGSC ā‰ˆ 0.0000530769 LINK
1 BGSC ā‰ˆ 0.0000564291 LINK
1 BGSC ā‰ˆ 0.0000551108 LINK
1 BGSC ā‰ˆ 0.0000498447 LINK
1 BGSC ā‰ˆ 0.000055421 LINK
1 BGSC ā‰ˆ 0.0000576541 LINK
1 BGSC ā‰ˆ 0.0000567199 LINK
Live Market Snapshot Updated Nov 22, 2026 12:01 UTC
1 BGSC price
$0.00052359
1 LINK price
$9.02
1 BGSC buys
0.00005566 LINK

How to swap BGSC to LINK

  1. Copy your LINK address

    Open your wallet with Arbitrum One selected as the network and copy the 0x address from its receive screen. Paste it into Recipient Address and compare the first and last characters.

  2. Enter the BGSC amount

    Type it in the form at the top. If it is under the pair's minimum, the form shows that minimum and one tap fills it in. The LINK estimate under it already has the payout fee taken out.

  3. Send BGSC to the deposit address

    Press Exchange Now. Your order page shows a one-time BNB Smart Chain deposit address: send the amount you entered in one transaction. Send from a wallet set to BNB Smart Chain that holds enough BNB for gas, and keep the gas price it suggests.

  4. Follow the order until LINK arrives

    The status moves from waiting to confirming, exchanging, sending and finished. Keep the transaction ID from the order page until the LINK is in your wallet.

What the BGSC to LINK swap costs

Two costs come out of the estimate before you see it: the exchange margin and the Arbitrum One network fee for your payout. You pay the BNB Smart Chain gas fee yourself, in BNB: the gas the transfer uses times the gas price, which most wallets suggest. A BEP-20 transfer runs the token's contract, so it uses more gas than a plain BNB transfer, and that gas is paid in BNB on BNB Smart Chain.

The payout fee is a flat amount per payout, so it takes a larger share of a small swap, and the LINK you get per BGSC drops near the minimum. The facts table below lists the typical network fees and the minimum with the date they were checked.

BGSC to LINK at a glance

From live exchange data, refreshed hourly.

Item You send You receive
Asset BugsCoin (BGSC) Chainlink (Arbitrum One) (LINK)
Network BNB Smart Chain Arbitrum One
Type BEP-20 token ERC-20 token
Contract 0xa4B68D…09dEa3 0xf97f4d…539FB4
Memo / tag Not needed Not needed
Network fee (typical, checked Nov 22, 2026) ā‰ˆ 75.14 BGSC ā‰ˆ 0.003132 LINK
Route Cross-chain: BNB Smart Chain to Arbitrum One
Rate Floating, estimate shown before you send
Minimum to send (typical, checked Nov 22, 2026) 264.8369282 BGSC
Account / ID Not needed to start a swap

How long the BGSC to LINK swap takes

The BGSC to LINK swap is three waits in a row: the BNB Smart Chain network confirms your deposit, the exchange partner swaps it, and the Arbitrum One network delivers the payout. BNB Smart Chain's block interval is 0.45 seconds, and a block is final within two blocks when at least two thirds of validators vote; the exchange partner swaps once your deposit has the confirmations it requires. In rare cases the partner's compliance check pauses an order, which adds time. The stages in order:

  1. Deposit sent and seen

    Your wallet broadcasts the BGSC, and the order page moves from waiting to confirming once the deposit is found.

  2. BNB Smart Chain confirms it

    A deposit priced below what validators accept can stay pending until you speed it up with a higher gas price.

  3. Exchange and LINK payout

    The partner swaps the BGSC and sends LINK. The status reaches sending, then finished, and the payout hash appears on the order page.

  4. Payout lands on Arbitrum One

    Your wallet lists it once an Arbitrum One block includes the transaction, as long as the wallet is set to Arbitrum One.

Your LINK address for the payout

Arbitrum One uses the Ethereum address format: 0x followed by 40 hexadecimal characters, the same address your wallet shows on Ethereum. Copy the address from your wallet's receive screen, not from your transaction history, where a scammer's lookalike address can sit next to yours, and compare the first and last characters after pasting. A payout sent to a wrong address cannot be reversed. Mistakes that cost a payout:

  • An exchange deposit address meant for Ethereum mainnet or Arbitrum Nova: the payout is sent on Arbitrum One, a separate chain.
  • An address at a wallet or exchange that does not support Arbitrum One: Arbitrum's FAQ says its team cannot recover such funds; only that wallet or exchange might.
  • A smart contract wallet address, such as a multisig, that exists on another network but not on Arbitrum One: getting a payout back then depends on deploying that wallet there.
  • A token contract address copied from Arbiscan instead of your own wallet address: tokens sent to a contract that cannot handle them can be stuck for good.

Receiving LINK on Arbitrum One: address and memo

Memo or tagNot used on this network.
Block explorerarbiscan.io

More about swapping on Arbitrum One

Which network your LINK arrives on

This page pays LINK on Arbitrum One. The same coin is listed on other networks too, each as its own entry in the coin list, and the links under this section open the ones open for payouts now.

Pick the entry before you press Exchange Now. The same coin on another network is a different asset to your wallet: balances do not carry over, moving it later takes another transfer, and an address on the wrong network can lose the payout.

After the LINK arrives

The payout is an Arbitrum One transaction, not an Ethereum mainnet one, so a wallet set to Ethereum shows nothing of it; switch yours to Arbitrum One. The coins can be moved again once the transaction is in a block, and the transfer is final when its batch is final on Ethereum.

Moving the payout to Ethereum mainnet later takes a bridge. Through the official Arbitrum bridge, a withdrawal takes at least seven days because of the challenge period, and you then claim it on Ethereum with a transaction that needs ETH on Ethereum for gas. Your wallet may list the LINK only after you add the token, and moving it later costs gas in ETH on Arbitrum One, so keep some ETH there.

If the address belongs to an exchange, check that it accepts this coin on Arbitrum One and what its minimum deposit is; for a token, it must support the same contract. Arbitrum tells exchanges to credit deposits only once they are final on Ethereum. To check the payout yourself, open the payout hash from the order page in an Arbitrum One explorer such as Arbiscan.

If your BGSC deposit is slow or stuck

Look up the transaction hash on BscScan. BNB Smart Chain charges no base fee, so a deposit that stays pending usually has a gas price below what validators accept, or it waits behind an earlier pending transaction from your address with a lower nonce. If your wallet offers speed up, use it on the oldest pending one: the wallet resends the same transaction with the same nonce and a higher gas price, so only one of the two can confirm.

Do not press cancel on a deposit, because a cancellation that confirms means nothing reaches the order. The sped-up version has a new hash, so give that one to support. If BscScan marks the transaction as failed, the coins stayed in your wallet but the gas was spent, so ask support before you send again. Only the exchange can speed up a withdrawal it sent for you.

Never send the deposit a second time to speed things up: a second payment is a second deposit. If the order page has not moved on after your deposit confirmed, message @xswap_to on Telegram with the Ref. ID from the order page and your deposit hash.

What others can see of your BGSC to LINK swap

Your deposit is public on BNB Smart Chain: your sending address, the deposit address, the amount and the fee show on BscScan, and they stay there. The payout, its amount and your receiving address are public on Arbiscan, where anyone who knows the address can see its whole history on Arbitrum One. The exchange partner that processes the swap sees both sides: your deposit and your payout address.

Before you send

  • Keep some BNB on BNB Smart Chain in the sending wallet for gas, since BNB held on another network cannot pay for this transfer.
  • Copy your LINK address from the wallet's receive screen and compare its start and end after pasting.
  • Send the amount you entered in one transaction, and let your wallet add its network fee on top.
  • Bookmark the order page and save its Ref. ID, because the Track Order list is stored only in this browser.

BGSC to LINK Frequently Asked Questions

How do I swap BGSC to LINK?

Enter the BGSC amount and your LINK address in the form at the top, press Exchange Now, and send BGSC on BNB Smart Chain to the one-time deposit address on your order page. After the BNB Smart Chain network confirms the deposit, the exchange partner sends LINK on Arbitrum One to your address. No account or email is needed.

How much LINK do I get for 1 BGSC?

The amount table in the rate section shows it for several sizes, as an estimate after fees with the time of the quote. For your own amount, the BGSC to LINK calculator asks for a live estimate. No figure is written here, because the rate floats.

How long does BGSC to LINK take?

There is no set time: the BNB Smart Chain network confirms the deposit first, then the exchange partner swaps it and sends the LINK payout. The timing section on this page lists each stage, and the order page shows which one you are in.

Is there a minimum amount for BGSC to LINK?

Yes, every pair has a minimum, and it moves with network conditions. The facts table on this page lists the last checked figure. The swap form warns you when your amount is under the current one. A deposit below it cannot be swapped, and getting those coins back is not assured.

Can I swap BugsCoin to Chainlink without KYC?

You need no account, and xswap.to asks for no ID. In rare cases the exchange partner's automated anti-money-laundering screening pauses a flagged swap and asks for verification, and the order then shows the status verifying. If that happens, message @xswap_to on Telegram with your transaction ID.

Can I receive LINK on another network?

Yes, through a different entry in the coin list, since this page pays LINK on Arbitrum One. The network section on this page links to the entries open for payouts now. Pick the entry before you press Exchange Now.

Why is the LINK I received different from the estimate?

The rate floats, so the market can move between the estimate and the moment your deposit confirms. A different deposit amount changes the payout too: if your wallet took its network fee out of the amount, less BGSC arrived than you entered.

How do I swap LINK back to BGSC?

Use the LINK to BGSC page, linked next to the swap form. It works the same way in reverse: paste a BNB Smart Chain address, then send LINK to the one-time deposit address.

About these numbers

The calculator and the swap form ask for a live estimate for the amount you type; if one fails to load, try again a few seconds later. The amount table is worked out from the page's latest quote and the network fees in it, so treat it as a guide and use the calculator for your own amount. The daily rates come from xswap.to's own price record, one value per day, and show the market rate before swap fees. Fees and the minimum in the facts table are typical figures with their check date.

Guides for this swap

Related swaps

Popular swaps