Exchange Currencies Track Order Guides Telegram bot

Swap Bitcoin SV (BSV) to Stellar (XLM) with no sign-up

Enter the BSV amount, paste a Stellar G address from your own wallet, then send BSV to the one-time deposit address on your order page. Once the Bitcoin SV network has confirmed the deposit, the exchange partner swaps it at the floating rate and sends XLM straight to your address.

Swap XLM to BSV instead

Network Fee
-
Deposit Fee
-

Enter an address on the Stellar network. Coins sent to an address on another network can be lost.

This coin requires a memo/tag. Funds sent without it may be lost.

Swap in Telegram

No Account Needed to Start

Swap without creating an account or uploading ID. xswap.to never asks for your seed phrase or private keys, and the exchanged coins go straight to your wallet. In rare cases the exchange partner's compliance check can pause a swap and ask for verification.

Updated Written and checked by the xswap.to team

BSV to XLM exchange rate

The BSV to XLM rate on this page is an estimate for a real swap after fees, so it reads a little lower than the ratio of the two market prices. It floats with the market until your deposit confirms.

Type any amount into the calculator below for a live figure. The daily table tracks the market rate between the two coins on each recent day, before swap fees, from xswap.to's own price record.

BSV to XLM Calculator

Enter an amount to see about how much you would receive. The estimate uses the live floating rate and already includes the payout network fee.

BSV Bitcoin SV
You get (estimate)
XLM Stellar
0
Rate
-
Value in USD
-
Network Fee
-

BSV to XLM daily rate

Market rate before swap fees, from xswap.to's own daily price record, Nov 16, 2026 to Nov 20, 2026.

Highest109.64 XLM
Lowest105.026 XLM
Change, 4 days+3.70%
DateRate
1 BSV ≈ 108.914 XLM
1 BSV ≈ 109.64 XLM
1 BSV ≈ 107.283 XLM
1 BSV ≈ 108.177 XLM
1 BSV ≈ 105.026 XLM
Live Market Snapshot Updated Nov 20, 2026 02:13 UTC
1 BSV price
$14.93
1 XLM price
$0.1356

How to swap BSV to XLM

  1. Copy your XLM address

    Open your Stellar wallet's receive screen and copy the account address that starts with G, from an account that already holds XLM. Paste it into Recipient Address and compare the first and last characters. If the address comes from an exchange, also enter the memo it shows with the address.

  2. Enter the BSV amount

    Type it in the form at the top. If it is under the pair's minimum, the form shows that minimum and one tap fills it in. The XLM estimate under it already has the payout fee taken out.

  3. Send BSV to the deposit address

    Press Exchange Now. Your order page shows a one-time Bitcoin SV deposit address: send the amount you entered in one transaction. Send the BSV from a Bitcoin SV wallet you control, and check the network fee it shows before you confirm.

  4. Follow the order until XLM arrives

    The status moves from waiting to confirming, exchanging, sending and finished. Keep the transaction ID from the order page until the XLM is in your wallet.

What the BSV to XLM swap costs

Two costs come out of the estimate before you see it: the exchange margin and the Stellar network fee for your payout. You pay the Bitcoin SV network fee yourself, on top of the amount: the wallet works it out from the size of the transaction, which grows with the number of earlier payments it spends, not from the amount you send. The payout fee is a flat amount per payout, so it takes a larger share of a small swap, and the XLM you get per BSV drops near the minimum.

BSV to XLM at a glance

From live exchange data, refreshed hourly.

Item You send You receive
Asset Bitcoin SV (BSV) Stellar (XLM)
Network Bitcoin SV Stellar
Type Native coin Native coin
Memo / tag Not needed Required with your address
Network fee (typical, checked Nov 19, 2026) - ≈ 0.02 XLM
Route Cross-chain: Bitcoin SV to Stellar
Rate Floating, estimate shown before you send
Account / ID Not needed to start a swap

How long the BSV to XLM swap takes

The BSV to XLM swap is three waits in a row: the Bitcoin SV network confirms your deposit, the exchange partner swaps it, and the Stellar network delivers the payout. Your deposit gets its first confirmation when a Bitcoin SV block includes it, and each further block makes it harder to reverse; the exchange partner swaps once it has the confirmations it requires. In rare cases the partner's compliance check pauses an order, which adds time. The stages in order:

  1. Deposit sent and seen

    Your wallet broadcasts the BSV, and the order page moves from waiting to confirming once the deposit is found.

  2. Bitcoin SV confirms the deposit

    The deposit counts as confirmed once a block includes it, and each further block adds a confirmation.

  3. Exchange and XLM payout

    The partner swaps the BSV and sends XLM. The status reaches sending, then finished, and the payout hash appears on the order page.

  4. Payout in a closed ledger

    Your wallet shows the XLM once the ledger with the payout closes, usually a few seconds after it is sent, and the payment is final from then on.

Your XLM address for the payout

A Stellar account address starts with G and is 56 characters of capital letters and the digits 2 to 7. The swap form rejected a muxed address (starts with M, 69 characters) and a contract address (starts with C), so paste the G address and enter any memo separately.

Copy the address from your wallet's receive screen, not from your transaction history, where a scammer's lookalike address can sit next to yours, and compare the first and last characters after pasting. A payout sent to a wrong address cannot be reversed. XLM can also carry a memo. If your address comes from an exchange, enter the memo it gives you, because the exchange uses it to credit your account; a wallet you control usually needs none. Mistakes that cost a payout:

  • Leaving out the memo of an exchange account: exchanges keep many customers in one Stellar account, and a payment without its memo can be lost or need manual tracing.
  • A new G address that holds no XLM yet: it is not an account until someone funds it, and a plain payment to it fails.

Receiving XLM on Stellar: address and memo

Memo or tagNeeded when the receiving wallet asks for one, which exchange accounts usually do. Enter it in the memo field of the form.
Block explorerstellar.expert

After the XLM arrives

The payout is a Stellar payment, and it is final once the ledger that includes it closes, usually a few seconds after it is sent. Every Stellar account must keep a minimum balance in XLM, two base reserves plus more for each trustline or other entry it holds, and that part of the balance cannot be spent. Validators can vote to change the base reserve. Each later transaction also costs a small fee in XLM.

If the address belongs to an exchange, copy its G address and memo exactly as its Stellar deposit page shows them, and check its minimum deposit; exchanges that pool deposits in one account credit you by the memo. To check the payout yourself, open the payout hash from the order page in a Stellar explorer such as stellar.expert.

If your BSV deposit is slow or stuck

Look up your transaction ID on a Bitcoin SV explorer. If the explorer knows the transaction but no block includes it yet, its fee rate is probably below what miners take now, and it can wait a long time. Whether a sent transaction can get a higher fee depends on the network and on the wallet, so read your wallet's own help before you try.

If the explorer does not know the transaction at all, the network has not accepted it, for example because its fee was below the minimum that nodes relay. Check the wallet's history and any error it shows, and ask support before you send again, so the same deposit is not paid twice.

Never send the deposit a second time to speed things up: a second payment is a second deposit. If the order page has not moved on after your deposit confirmed, message @xswap_to on Telegram with the Ref. ID from the order page and your deposit hash.

What others can see of your BSV to XLM swap

An ordinary Bitcoin SV transaction is public: anyone can look up its amount, the deposit address and the addresses it was sent from on a Bitcoin SV explorer. The payout, its amount, your G address and any memo are visible to anyone on a Stellar explorer such as stellar.expert, and they stay in the ledger's history. The exchange partner that processes the swap sees both sides: your deposit and your payout address.

Before you send

  • Check the network fee in your Bitcoin SV wallet before you confirm, because a fee below what miners take now can leave the deposit waiting.
  • Copy your XLM address from the wallet's receive screen and compare its start and end after pasting.
  • Enter the memo your exchange gives you for XLM, or the payout cannot be credited to your account.
  • Send the amount you entered in one transaction, and let your wallet add its network fee on top.
  • Bookmark the order page and save its Ref. ID, because the Track Order list is stored only in this browser.

BSV to XLM Frequently Asked Questions

How do I swap BSV to XLM?

Enter the BSV amount and your XLM address in the form at the top, press Exchange Now, and send BSV to the one-time deposit address on your order page. After the Bitcoin SV network confirms the deposit, the exchange partner sends XLM to your address. No account or email is needed.

How much XLM do I get for 1 BSV?

Type 1 into the BSV to XLM calculator on this page for a live estimate after fees. No figure is written here, because the rate floats and a number in the text would soon be out of date.

How long does BSV to XLM take?

There is no set time: the Bitcoin SV network confirms the deposit first, then the exchange partner swaps it and sends the XLM payout. The timing section on this page lists each stage, and the order page shows which one you are in.

Is there a minimum amount for BSV to XLM?

Yes, every pair has a minimum, and it moves with network conditions. The swap form warns you when your amount is under the current one. A deposit below it cannot be swapped, and getting those coins back is not assured.

Can I swap Bitcoin SV to Stellar without KYC?

You need no account, and xswap.to asks for no ID. In rare cases the exchange partner's automated anti-money-laundering screening pauses a flagged swap and asks for verification, and the order then shows the status verifying. If that happens, message @xswap_to on Telegram with your transaction ID.

Do I need a memo or tag to swap BSV to XLM?

For the payout, only if your XLM address belongs to an exchange: enter the memo it shows with the address. A wallet you control usually needs none.

Why is the XLM I received different from the estimate?

The rate floats, so the market can move between the estimate and the moment your deposit confirms. A different deposit amount changes the payout too: if your wallet took its network fee out of the amount, less BSV arrived than you entered.

How do I swap XLM back to BSV?

Use the XLM to BSV page, linked next to the swap form. It works the same way in reverse: paste a Bitcoin SV address, then send XLM to the one-time deposit address.

About these numbers

The calculator and the swap form ask for a live estimate for the amount you type; if one fails to load, try again a few seconds later. The daily rates come from xswap.to's own price record, one value per day, and show the market rate before swap fees.

Guides for this swap

Related swaps

Popular swaps