Swap Casper (CSPR) to Tether USD (USDT) with no sign-up
Enter the CSPR amount, paste a TON wallet address from your own wallet, then send CSPR to the one-time deposit address on your order page. Once the Casper network has confirmed the deposit, the exchange partner swaps it at the floating rate and sends USDT on TON straight to your address.
Swap without creating an account or uploading ID. xswap.to never asks for your seed phrase or private keys, and the exchanged coins go straight to your wallet. In rare cases the exchange partner's compliance check can pause a swap and ask for verification.
The CSPR to USDT rate on this page is an estimate for a real swap after fees, so it reads a little lower than the ratio of the two market prices. It floats with the market until your deposit confirms.
Type any amount into the calculator below for a live figure. The table under it shows what several CSPR amounts come to in USDT after fees. It is worked out from the page's latest quote and carries that quote's time.
CSPR to USDT Calculator
Enter an amount to see about how much you would receive. The estimate uses the live floating rate and already includes the payout network fee.
CSPRCasper
You get (estimate)
USDTTONJetton
Rate
1 CSPR ≈ 0.00167147 USDT
Value in USD
≈ $100.29
Network Fee
0.0578584 USDT
CSPR to USDT conversion table
Estimates after fees, worked out from one live quote taken at . The rate floats: the calculator and the swap form show the live figure.
Live Market SnapshotUpdated Nov 22, 2026 10:16 UTC
1 CSPR price
$0.00179438
1 USDT price
$1.00
1 CSPR buys
0.00167147 USDT
How to swap CSPR to USDT
1
Copy your USDT address
Open your TON wallet's receive screen and copy the address it shows, which usually starts with UQ, the non-bounceable form wallet apps use for receiving. Paste it into Recipient Address and compare the first and last characters. If the address comes from an exchange, also enter the memo it shows with the address.
2
Enter the CSPR amount
Type it in the form at the top. If it is under the pair's minimum, the form shows that minimum and one tap fills it in. The USDT estimate under it already has the payout fee taken out.
3
Send CSPR to the deposit address
Press Exchange Now. Your order page shows a one-time Casper deposit address: send the amount you entered in one transaction. Send CSPR from a wallet that holds it on Casper and also holds enough of the coin the network charges its fee in, usually its own coin.
4
Follow the order until USDT arrives
The status moves from waiting to confirming, exchanging, sending and finished. Keep the transaction ID from the order page until the USDT is in your wallet.
What the CSPR to USDT swap costs
Two costs come out of the estimate before you see it: the exchange margin and the TON network fee for your payout. You pay the Casper network fee for your deposit yourself, in the coin the network charges fees in, usually its own coin, and your wallet works it out when you send.
The payout fee is a flat amount per payout, so it takes a larger share of a small swap, and the USDT you get per CSPR drops near the minimum. The facts table below lists the typical network fees and the minimum with the date they were checked.
CSPR to USDT at a glance
From live exchange data, refreshed hourly.
Item
You send
You receive
Asset
Casper (Mainnet) (CSPR)
Tether USD (TON) (USDT)
Network
Casper
TON
Type
Native coin
Jetton token
Contract
-
EQCxE6mU…Id_sDs
Memo / tag
Not needed
Required with your address
Network fee (typical, checked Nov 22, 2026)
≈ 0.2 CSPR
≈ 0.0568 USDT
Route
Cross-chain: Casper to TON
Rate
Floating, estimate shown before you send
Minimum to send (typical, checked Nov 22, 2026)
74.21241 CSPR
Account / ID
Not needed to start a swap
How long the CSPR to USDT swap takes
The CSPR to USDT swap is three waits in a row: the Casper network confirms your deposit, the exchange partner swaps it, and the TON network delivers the payout. The time Casper needs to confirm a deposit depends on the network's design and on how busy it is, and the exchange partner swaps only after the confirmations it requires. In rare cases the partner's compliance check pauses an order, which adds time. The stages in order:
1Deposit sent and seen
Your wallet broadcasts the CSPR, and the order page moves from waiting to confirming once the deposit is found.
2Casper confirms the deposit
When the network is busy, a deposit sent with a low fee can wait longer for its first confirmation.
3Exchange and USDT payout
The partner swaps the CSPR and sends USDT. The status reaches sending, then finished, and the payout hash appears on the order page.
4Payout final on TON
Your wallet lists the USDT under your address once the transfer is in a block, and a masterchain block then makes it final.
Your USDT address for the payout
A TON wallet address is usually shown as 48 characters of letters, digits, hyphens and the underline sign, starting with UQ (non-bounceable, the form meant for wallets) or EQ (bounceable). The raw form is 0: followed by 64 hex characters. All forms point to the same account; for a new, unused wallet, give the UQ form.
Copy the address from your wallet's receive screen, not from your transaction history, where a scammer's lookalike address can sit next to yours, and compare the first and last characters after pasting. A payout sent to a wrong address cannot be reversed. USDT on TON can also carry a memo. If your address comes from an exchange, enter the memo it gives you, because the exchange uses it to credit your account; a wallet you control usually needs none. Mistakes that cost a payout:
The EQ form of a wallet that has never sent anything: Gram (TON) sent in bounceable form to an undeployed wallet returns to the sender, so give the UQ form.
An exchange deposit address that needs a memo, entered without it or for a coin whose listing here has no memo field: the exchange cannot match the payout automatically.
A Jetton wallet or Jetton master address copied from an explorer: payouts must go to your regular wallet address, the one your wallet app shows.
Receiving USDT on TON: address and memo
Memo or tag
Needed when the receiving wallet asks for one, which exchange accounts usually do. Enter it in the memo field of the form.
This page pays USDT on TON. The same coin is listed on other networks too, each as its own entry in the coin list, and the links under this section open the ones open for payouts now.
Pick the entry before you press Exchange Now. The same coin on another network is a different asset to your wallet: balances do not carry over, moving it later takes another transfer, and an address on the wrong network can lose the payout.
The payout is final once a masterchain block includes it, which normally takes about a second, and your wallet lists it under the address you pasted. If nothing shows, compare the wallet app's address with the one on the order page: one recovery phrase can control several TON wallets, one per wallet version, each with its own address and balance. Your USDT sits in a separate Jetton wallet contract linked to your address, which the incoming transfer opens if needed with Gram (TON) the sender attaches; moving it later takes Gram (TON) for fees, unless your wallet app offers gasless transfers.
If the address belongs to an exchange, check that the exchange gives it for USDT deposits on the TON network, note its minimum deposit, and enter the memo it shows; when the form has no memo field for USDT, receive to your own wallet instead. To check the payout yourself, open the payout hash from the order page in a TON explorer such as Tonviewer.
If your CSPR deposit is slow or stuck
Look up the transaction ID from your wallet in a block explorer for Casper. If the explorer cannot find it, the transfer may never have been broadcast, so check your wallet's history first. If it is listed but not yet confirmed, the network may be busy or the fee may be below what it takes now; your wallet's help pages say whether a pending fee can be raised.
Never send the deposit a second time to speed things up: a second payment is a second deposit. If the order page has not moved on after your deposit confirmed, message @xswap_to on Telegram with the Ref. ID from the order page and your deposit hash.
What others can see of your CSPR to USDT swap
Your deposit is recorded on Casper for good, and on most networks its amount and both addresses can be read by anyone with a block explorer. The payout, its amount and your receiving address are visible to anyone in a TON explorer, together with your wallet's balance and token holdings. The exchange partner that processes the swap sees both sides: your deposit and your payout address.
Before you send
Send CSPR only on Casper, the network your order page names, because a transfer on another network or to a wrong address cannot be reversed.
Copy your USDT address from the wallet's receive screen and compare its start and end after pasting.
Enter the memo your exchange gives you for USDT, or the payout cannot be credited to your account.
Send the amount you entered in one transaction, and let your wallet add its network fee on top.
Bookmark the order page and save its Ref. ID, because the Track Order list is stored only in this browser.
CSPR to USDT Frequently Asked Questions
How do I swap CSPR to USDT?
Enter the CSPR amount and your USDT address in the form at the top, press Exchange Now, and send CSPR to the one-time deposit address on your order page. After the Casper network confirms the deposit, the exchange partner sends USDT on TON to your address. No account or email is needed.
How much USDT do I get for 1 CSPR?
The amount table in the rate section shows it for several sizes, as an estimate after fees with the time of the quote. For your own amount, the CSPR to USDT calculator asks for a live estimate. No figure is written here, because the rate floats.
How long does CSPR to USDT take?
There is no set time: the Casper network confirms the deposit first, then the exchange partner swaps it and sends the USDT payout. The timing section on this page lists each stage, and the order page shows which one you are in.
Is there a minimum amount for CSPR to USDT?
Yes, every pair has a minimum, and it moves with network conditions. The facts table on this page lists the last checked figure. The swap form warns you when your amount is under the current one. A deposit below it cannot be swapped, and getting those coins back is not assured.
Can I swap Casper to Tether USD without KYC?
You need no account, and xswap.to asks for no ID. In rare cases the exchange partner's automated anti-money-laundering screening pauses a flagged swap and asks for verification, and the order then shows the status verifying. If that happens, message @xswap_to on Telegram with your transaction ID.
Do I need a memo or tag to swap CSPR to USDT?
For the payout, only if your USDT address belongs to an exchange: enter the memo it shows with the address. A wallet you control usually needs none.
Can I receive USDT on another network?
Yes, through a different entry in the coin list, since this page pays USDT on TON. The network section on this page links to the entries open for payouts now. Pick the entry before you press Exchange Now.
Why is the USDT I received different from the estimate?
The rate floats, so the market can move between the estimate and the moment your deposit confirms. A different deposit amount changes the payout too: if your wallet took its network fee out of the amount, less CSPR arrived than you entered.
How do I swap USDT back to CSPR?
Use the USDT to CSPR page, linked next to the swap form. It works the same way in reverse: paste a Casper address, then send USDT to the one-time deposit address.
About these numbers
The calculator and the swap form ask for a live estimate for the amount you type; if one fails to load, try again a few seconds later. The amount table is worked out from the page's latest quote and the network fees in it, so treat it as a guide and use the calculator for your own amount. Fees and the minimum in the facts table are typical figures with their check date.