Exchange Currencies Track Order Guides Telegram bot

Swap MultiversX (EGLD) to Avalanche (AVAX) with no sign-up

Enter the EGLD amount, paste a BNB Smart Chain address from your own wallet, then send EGLD to the one-time deposit address on your order page. Once the MultiversX network has confirmed the deposit, the exchange partner swaps it at the floating rate and sends AVAX on BNB Smart Chain straight to your address.

Swap AVAX to EGLD instead

Rate
1 EGLD ≈ 0.336553 AVAX
Network Fee
-
Deposit Fee
-

Enter an address on the BNB Smart Chain (BEP-20) network. Coins sent to an address on another network can be lost.

Swap in Telegram

No Account Needed to Start

Swap without creating an account or uploading ID. xswap.to never asks for your seed phrase or private keys, and the exchanged coins go straight to your wallet. In rare cases the exchange partner's compliance check can pause a swap and ask for verification.

Updated Written and checked by the xswap.to team

EGLD to AVAX exchange rate

The EGLD to AVAX rate on this page is an estimate for a real swap after fees, so it reads a little lower than the ratio of the two market prices. It floats with the market until your deposit confirms.

Type any amount into the calculator below for a live figure. The table under it shows what several EGLD amounts come to in AVAX after fees. It is worked out from the page's latest quote and carries that quote's time. The daily table tracks the market rate between the two coins on each recent day, before swap fees, from xswap.to's own price record.

EGLD to AVAX Calculator

Enter an amount to see about how much you would receive. The estimate uses the live floating rate and already includes the payout network fee.

EGLD MultiversX
You get (estimate)
AVAX BNB Chain BEP-20
13.4621286 AVAX
Rate
1 EGLD ≈ 0.336553 AVAX
Value in USD
≈ $94.61
Network Fee
0.0004982 AVAX

EGLD to AVAX conversion table

Estimates after fees, worked out from one live quote taken at . The rate floats: the calculator and the swap form show the live figure.
You sendYou get (estimate after fees)
10 EGLD≈ 3.36515 AVAX
50 EGLD≈ 16.8278 AVAX
100 EGLD≈ 33.6561 AVAX
500 EGLD≈ 168.283 AVAX
1,000 EGLD≈ 336.566 AVAX
5,000 EGLD≈ 1,682.83 AVAX
10,000 EGLD≈ 3,365.66 AVAX

EGLD to AVAX daily rate

Market rate before swap fees, from xswap.to's own daily price record, Nov 16, 2026 to Nov 22, 2026.

Highest0.36218 AVAX
Lowest0.335141 AVAX
Change, 6 days−3.61%
0.36218 0.335141
Nov 16, 2026Nov 22, 2026
DateRate
1 EGLD ≈ 0.342838 AVAX
1 EGLD ≈ 0.344408 AVAX
1 EGLD ≈ 0.335141 AVAX
1 EGLD ≈ 0.36218 AVAX
1 EGLD ≈ 0.355849 AVAX
1 EGLD ≈ 0.35968 AVAX
1 EGLD ≈ 0.355672 AVAX
Live Market Snapshot Updated Nov 22, 2026 10:22 UTC
1 EGLD price
$2.42
1 AVAX price
$7.03
1 EGLD buys
0.33655322 AVAX

How to swap EGLD to AVAX

  1. Copy your AVAX address

    Open your wallet with BNB Smart Chain selected and copy your 0x address from its receive screen; BNB and BEP-20 tokens use that one address. Paste it into Recipient Address and compare the first and last characters.

  2. Enter the EGLD amount

    Type it in the form at the top. If it is under the pair's minimum, the form shows that minimum and one tap fills it in. The AVAX estimate under it already has the payout fee taken out.

  3. Send EGLD to the deposit address

    Press Exchange Now. Your order page shows a one-time MultiversX deposit address: send the amount you entered in one transaction. Send EGLD from a wallet that holds it on MultiversX and also holds enough of the coin the network charges its fee in, usually its own coin.

  4. Follow the order until AVAX arrives

    The status moves from waiting to confirming, exchanging, sending and finished. Keep the transaction ID from the order page until the AVAX is in your wallet.

What the EGLD to AVAX swap costs

Two costs come out of the estimate before you see it: the exchange margin and the BNB Smart Chain network fee for your payout. You pay the MultiversX network fee for your deposit yourself, in the coin the network charges fees in, usually its own coin, and your wallet works it out when you send.

The payout fee is a flat amount per payout, so it takes a larger share of a small swap, and the AVAX you get per EGLD drops near the minimum. The facts table below lists the typical network fees and the minimum with the date they were checked.

EGLD to AVAX at a glance

From live exchange data, refreshed hourly.

Item You send You receive
Asset MultiversX (EGLD) Avalanche (Binance Smart Chain) (AVAX)
Network MultiversX BNB Smart Chain
Type Native coin BEP-20 token
Contract - 0x1ce0c2…794041
Memo / tag Not needed Not needed
Network fee (typical, checked Nov 22, 2026) ≈ 0.00005 EGLD ≈ 0.0005021 AVAX
Route Cross-chain: MultiversX to BNB Smart Chain
Rate Floating, estimate shown before you send
Minimum to send (typical, checked Nov 22, 2026) 0.0105 EGLD
Account / ID Not needed to start a swap

How long the EGLD to AVAX swap takes

The EGLD to AVAX swap is three waits in a row: the MultiversX network confirms your deposit, the exchange partner swaps it, and the BNB Smart Chain network delivers the payout. The time MultiversX needs to confirm a deposit depends on the network's design and on how busy it is, and the exchange partner swaps only after the confirmations it requires. In rare cases the partner's compliance check pauses an order, which adds time. The stages in order:

  1. Deposit sent and seen

    Your wallet broadcasts the EGLD, and the order page moves from waiting to confirming once the deposit is found.

  2. MultiversX confirms the deposit

    When the network is busy, a deposit sent with a low fee can wait longer for its first confirmation.

  3. Exchange and AVAX payout

    The partner swaps the EGLD and sends AVAX. The status reaches sending, then finished, and the payout hash appears on the order page.

  4. Payout final on BNB Smart Chain

    Your wallet shows the payout once a block includes it, and in most cases the block is final within two blocks.

Your AVAX address for the payout

BSC uses the Ethereum address format: 0x followed by 40 hexadecimal characters, and an Ethereum wallet's address works on BSC too. An address that starts with bnb1 belongs to the old BNB Beacon Chain, which stopped processing transactions in November 2024, so it cannot receive a BSC payout.

Copy the address from your wallet's receive screen, not from your transaction history, where a scammer's lookalike address can sit next to yours, and compare the first and last characters after pasting. A payout sent to a wrong address cannot be reversed. Mistakes that cost a payout:

  • An exchange deposit address meant for AVAX on Ethereum or opBNB: the 0x address can look the same, but the exchange may not credit a BNB Smart Chain payout.
  • A token contract address copied from BscScan instead of your own wallet address: tokens sent to a contract that cannot handle them can be lost.
  • A multisig or other smart contract wallet deployed on another network but not on BNB Smart Chain, where a payout stays stuck unless the wallet can be recreated there.

Receiving AVAX on BNB Smart Chain: address and memo

Memo or tagNot used on this network.
Block explorerbscscan.com

More about swapping on BNB Smart Chain

Which network your AVAX arrives on

This page pays AVAX on BNB Smart Chain. The same coin is listed on other networks too, each as its own entry in the coin list, and the links under this section open the ones open for payouts now.

Pick the entry before you press Exchange Now. The same coin on another network is a different asset to your wallet: balances do not carry over, moving it later takes another transfer, and an address on the wrong network can lose the payout. On the sending side, send EGLD only on MultiversX, the network your order page names. EGLD sent on another network does not reach the deposit address.

After the AVAX arrives

The payout shows in your wallet once a block includes it. BNB Smart Chain finalizes a block within two blocks when at least two thirds of validators vote; if too few vote, it falls back to probabilistic finality, where each further block makes the payout harder to reverse. You need no BNB to receive it, because the sender pays the gas. Moving the AVAX later costs gas paid in BNB, so keep some BNB at that address. As a BEP-20 token, this AVAX stays on BNB Smart Chain; moving it elsewhere takes a bridge or another swap.

If the address belongs to an exchange, check that the exchange credits AVAX on BNB Smart Chain at that address and what its minimum deposit is; a deposit below the minimum or on a network it does not support may not be credited. To check the payout yourself, open the payout hash from the order page in a BNB Smart Chain explorer such as BscScan.

If your EGLD deposit is slow or stuck

Look up the transaction ID from your wallet in a block explorer for MultiversX. If the explorer cannot find it, the transfer may never have been broadcast, so check your wallet's history first. If it is listed but not yet confirmed, the network may be busy or the fee may be below what it takes now; your wallet's help pages say whether a pending fee can be raised.

Never send the deposit a second time to speed things up: a second payment is a second deposit. If the order page has not moved on after your deposit confirmed, message @xswap_to on Telegram with the Ref. ID from the order page and your deposit hash.

What others can see of your EGLD to AVAX swap

Your deposit is recorded on MultiversX for good, and on most networks its amount and both addresses can be read by anyone with a block explorer. The payout, its amount and your 0x address are public on BscScan, and so is everything that address does later on BNB Smart Chain. The exchange partner that processes the swap sees both sides: your deposit and your payout address.

Before you send

  • Send EGLD only on MultiversX, the network your order page names, because a transfer on another network or to a wrong address cannot be reversed.
  • Copy your AVAX address from the wallet's receive screen and compare its start and end after pasting.
  • Send the amount you entered in one transaction, and let your wallet add its network fee on top.
  • Bookmark the order page and save its Ref. ID, because the Track Order list is stored only in this browser.

EGLD to AVAX Frequently Asked Questions

How do I swap EGLD to AVAX?

Enter the EGLD amount and your AVAX address in the form at the top, press Exchange Now, and send EGLD to the one-time deposit address on your order page. After the MultiversX network confirms the deposit, the exchange partner sends AVAX on BNB Smart Chain to your address. No account or email is needed.

How much AVAX do I get for 1 EGLD?

The amount table in the rate section shows it for several sizes, as an estimate after fees with the time of the quote. For your own amount, the EGLD to AVAX calculator asks for a live estimate. No figure is written here, because the rate floats.

How long does EGLD to AVAX take?

There is no set time: the MultiversX network confirms the deposit first, then the exchange partner swaps it and sends the AVAX payout. The timing section on this page lists each stage, and the order page shows which one you are in.

Is there a minimum amount for EGLD to AVAX?

Yes, every pair has a minimum, and it moves with network conditions. The facts table on this page lists the last checked figure. The swap form warns you when your amount is under the current one. A deposit below it cannot be swapped, and getting those coins back is not assured.

Can I swap MultiversX to Avalanche without KYC?

You need no account, and xswap.to asks for no ID. In rare cases the exchange partner's automated anti-money-laundering screening pauses a flagged swap and asks for verification, and the order then shows the status verifying. If that happens, message @xswap_to on Telegram with your transaction ID.

Can I receive AVAX on another network?

Yes, through a different entry in the coin list, since this page pays AVAX on BNB Smart Chain. The network section on this page links to the entries open for payouts now. Pick the entry before you press Exchange Now.

Why is the AVAX I received different from the estimate?

The rate floats, so the market can move between the estimate and the moment your deposit confirms. A different deposit amount changes the payout too: if your wallet took its network fee out of the amount, less EGLD arrived than you entered.

How do I swap AVAX back to EGLD?

Use the AVAX to EGLD page, linked next to the swap form. It works the same way in reverse: paste a MultiversX address, then send AVAX to the one-time deposit address.

About these numbers

The calculator and the swap form ask for a live estimate for the amount you type; if one fails to load, try again a few seconds later. The amount table is worked out from the page's latest quote and the network fees in it, so treat it as a guide and use the calculator for your own amount. The daily rates come from xswap.to's own price record, one value per day, and show the market rate before swap fees. Fees and the minimum in the facts table are typical figures with their check date.

Guides for this swap

Related swaps

Popular swaps