Exchange Currencies Track Order Guides Telegram bot

Swap Ethereum (ETH) to Fetch (FET) with no sign-up

Enter the ETH amount, paste your Fetch.ai address from your own wallet, then send ETH to the one-time deposit address on your order page. Once the Ethereum network has confirmed the deposit, the exchange partner swaps it at the floating rate and sends FET straight to your address.

Swap FET to ETH instead

Rate
1 ETH ≈ 15,462.6093 FET
Network Fee
-
Deposit Fee
-

Enter an address on the Fetch.ai network. Coins sent to an address on another network can be lost.

This coin requires a memo/tag. Funds sent without it may be lost.

Swap in Telegram

No Account Needed to Start

Swap without creating an account or uploading ID. xswap.to never asks for your seed phrase or private keys, and the exchanged coins go straight to your wallet. In rare cases the exchange partner's compliance check can pause a swap and ask for verification.

Updated Written and checked by the xswap.to team

ETH to FET exchange rate

The ETH to FET rate on this page is an estimate for a real swap after fees, so it reads a little lower than the ratio of the two market prices. It floats with the market until your deposit confirms.

Type any amount into the calculator below for a live figure. The table under it shows what several ETH amounts come to in FET after fees. It is worked out from the page's latest quote and carries that quote's time. The daily table tracks the market rate between the two coins on each recent day, before swap fees, from xswap.to's own price record.

ETH to FET Calculator

Enter an amount to see about how much you would receive. The estimate uses the live floating rate and already includes the payout network fee.

ETH Ethereum
You get (estimate)
FET Fetch.ai
15,462.609317 FET
Rate
1 ETH ≈ 15,462.6 FET
Value in USD
≈ $1,710.29
Network Fee
0 FET

ETH to FET conversion table

Estimates after fees, worked out from one live quote taken at . The rate floats: the calculator and the swap form show the live figure.
You sendYou get (estimate after fees)
0.1 ETH≈ 1,545.43 FET
0.5 ETH≈ 7,730.84 FET
1 ETH≈ 15,462.6 FET
5 ETH≈ 77,316.8 FET
10 ETH≈ 154,634 FET

ETH to FET daily rate

Market rate before swap fees, from xswap.to's own daily price record, Nov 16, 2026 to Nov 22, 2026.

Highest15,488.9 FET
Lowest13,806.1 FET
Change, 6 days+11.51%
15,488.9 13,806.1
Nov 16, 2026Nov 22, 2026
DateRate
1 ETH ≈ 15,488.9 FET
1 ETH ≈ 14,312.2 FET
1 ETH ≈ 14,082.3 FET
1 ETH ≈ 13,908.3 FET
1 ETH ≈ 13,826.7 FET
1 ETH ≈ 13,806.1 FET
1 ETH ≈ 13,889.9 FET
Live Market Snapshot Updated Nov 22, 2026 15:13 UTC
1 ETH price
$1,754.46
1 FET price
$0.1106
1 ETH buys
15462.609317 FET

How to swap ETH to FET

  1. Copy your FET address

    Open your wallet's receive screen for FET on Fetch.ai and copy the address it shows, after checking that the wallet names the same network. Paste it into Recipient Address and compare the first and last characters. If the address comes from an exchange, also enter the memo it shows with the address.

  2. Enter the ETH amount

    Type it in the form at the top. If it is under the pair's minimum, the form shows that minimum and one tap fills it in. The FET estimate under it already has the payout fee taken out.

  3. Send ETH to the deposit address

    Press Exchange Now. Your order page shows a one-time Ethereum deposit address: send the amount you entered in one transaction. Send from a wallet set to Ethereum mainnet that holds enough ETH for gas, and keep the max fee it suggests.

  4. Follow the order until FET arrives

    The status moves from waiting to confirming, exchanging, sending and finished. Keep the transaction ID from the order page until the FET is in your wallet.

What the ETH to FET swap costs

Two costs come out of the estimate before you see it: the exchange margin and the Fetch.ai network fee for your payout. You pay the Ethereum gas fee yourself, in ETH: the gas the transfer uses times the base fee plus a priority tip, and most wallets suggest both. The gas is paid from your ETH balance on top of the amount sent, so it does not reduce the ETH that reaches the deposit address.

The payout fee is a flat amount per payout, so it takes a larger share of a small swap, and the FET you get per ETH drops near the minimum. The facts table below lists the typical network fees and the minimum with the date they were checked.

ETH to FET at a glance

From live exchange data, refreshed hourly.

Item You send You receive
Asset Ethereum (ETH) Fetch (Mainnet) (FET)
Network Ethereum Fetch.ai
Type Native coin Native coin
Memo / tag Not needed Required with your address
Network fee (typical, checked Nov 22, 2026) ≈ 0.00006 ETH None listed
Route Cross-chain: Ethereum to Fetch.ai
Rate Floating, estimate shown before you send
Minimum to send (typical, checked Nov 22, 2026) 0.0001323 ETH
Account / ID Not needed to start a swap

How long the ETH to FET swap takes

The ETH to FET swap is three waits in a row: the Ethereum network confirms your deposit, the exchange partner swaps it, and the Fetch.ai network delivers the payout. Ethereum runs in 12-second slots, each with one validator chosen to propose a block, though a slot is sometimes empty; the exchange partner swaps once your deposit has the confirmations it requires. In rare cases the partner's compliance check pauses an order, which adds time. The stages in order:

  1. Deposit sent and seen

    Your wallet broadcasts the ETH, and the order page moves from waiting to confirming once the deposit is found.

  2. Ethereum includes it in a block

    Each 12-second slot can add a block. A deposit whose max fee is below the base fee can wait until the base fee falls or you speed it up.

  3. Exchange and FET payout

    The partner swaps the ETH and sends FET. The status reaches sending, then finished, and the payout hash appears on the order page.

  4. Payout confirmed on Fetch.ai

    Your wallet lists the FET as received once Fetch.ai has confirmed the payout.

Your FET address for the payout

A Fetch.ai receiving address is bech32 text that starts with fetch1, and the swap form accepted such addresses in our checks. It rejected a 0x plus 40 hex characters address, which belongs to an EVM chain.

Copy the address from your wallet's receive screen, not from your transaction history, where a scammer's lookalike address can sit next to yours, and compare the first and last characters after pasting. A payout sent to a wrong address cannot be reversed. FET can also carry a memo. If your address comes from an exchange, enter the memo it gives you, because the exchange uses it to credit your account; a wallet you control usually needs none. Mistakes that cost a payout:

  • An address for FET on another network: the same coin on a different network is a separate asset, and a payout sent there can be lost.
  • An exchange address used without the memo or tag the exchange asks for, which it needs to credit the payout to you.
  • A token contract address copied from an explorer instead of the address of your own wallet.

Receiving FET on Fetch.ai: address and memo

Memo or tagNeeded when the receiving wallet asks for one, which exchange accounts usually do. Enter it in the memo field of the form.
Block explorerwww.mintscan.io

Which network your FET arrives on

This page pays FET. The same coin is listed on other networks too, each as its own entry in the coin list, and the links under this section open the ones open for payouts now.

Pick the entry before you press Exchange Now. The same coin on another network is a different asset to your wallet: balances do not carry over, moving it later takes another transfer, and an address on the wrong network can lose the payout. On the sending side, send ETH only on Ethereum, the network your order page names. ETH sent on another network does not reach the deposit address.

After the FET arrives

The payout is an ordinary Fetch.ai transaction from the exchange partner to your address. Your wallet shows it once it has seen the transaction, often as pending at first, and counts it as received once the network has confirmed it. If nothing shows, check that the wallet is set to Fetch.ai and, for a token, that it displays this token.

If the address belongs to an exchange, check that the exchange accepts FET on Fetch.ai, what its minimum deposit is and whether it needs a memo or tag; exchanges credit deposits by their own rules. To check the payout yourself, look up the payout hash from the order page in a Fetch.ai block explorer.

If your ETH deposit is slow or stuck

Look up the transaction hash on Etherscan. If it is still pending, its max fee is probably below the current base fee, which rises after blocks fuller than the target, or its tip is too small for validators to pick it. It can also wait behind an earlier pending transaction from your address with a lower nonce. If your wallet offers speed up, use it on the oldest pending one: the wallet resends the same transaction with the same nonce and a higher fee, so only one of the two can confirm.

Do not press cancel on a deposit, because a cancellation that confirms means nothing reaches the order. The sped-up version has a new hash, so give that one to support. If Etherscan marks the transaction as failed, the coins stayed in your wallet but the gas was spent, so ask support before you send again. A withdrawal from an exchange account can only be sped up by that exchange.

Never send the deposit a second time to speed things up: a second payment is a second deposit. If the order page has not moved on after your deposit confirmed, message @xswap_to on Telegram with the Ref. ID from the order page and your deposit hash.

What others can see of your ETH to FET swap

Your deposit is public on Ethereum: your sending address, the deposit address, the amount and the fee show on Etherscan and any other explorer, and they stay there. The payout is recorded on Fetch.ai too, where its amount and your receiving address are usually visible to anyone with a block explorer. The exchange partner that processes the swap sees both sides: your deposit and your payout address.

Before you send

  • Leave enough ETH in your wallet for gas on top of what you send, because Ethereum rejects a transfer whose fee the balance cannot cover.
  • Copy your FET address from the wallet's receive screen and compare its start and end after pasting.
  • Enter the memo your exchange gives you for FET, or the payout cannot be credited to your account.
  • Send the amount you entered in one transaction, and let your wallet add its network fee on top.
  • Bookmark the order page and save its Ref. ID, because the Track Order list is stored only in this browser.

ETH to FET Frequently Asked Questions

How do I swap ETH to FET?

Enter the ETH amount and your FET address in the form at the top, press Exchange Now, and send ETH to the one-time deposit address on your order page. After the Ethereum network confirms the deposit, the exchange partner sends FET to your address. No account or email is needed.

How much FET do I get for 1 ETH?

The amount table in the rate section shows it for several sizes, as an estimate after fees with the time of the quote. For your own amount, the ETH to FET calculator asks for a live estimate. No figure is written here, because the rate floats.

How long does ETH to FET take?

There is no set time: the Ethereum network confirms the deposit first, then the exchange partner swaps it and sends the FET payout. The timing section on this page lists each stage, and the order page shows which one you are in.

Is there a minimum amount for ETH to FET?

Yes, every pair has a minimum, and it moves with network conditions. The facts table on this page lists the last checked figure. The swap form warns you when your amount is under the current one. A deposit below it cannot be swapped, and getting those coins back is not assured.

Can I swap Ethereum to Fetch without KYC?

You need no account, and xswap.to asks for no ID. In rare cases the exchange partner's automated anti-money-laundering screening pauses a flagged swap and asks for verification, and the order then shows the status verifying. If that happens, message @xswap_to on Telegram with your transaction ID.

Do I need a memo or tag to swap ETH to FET?

For the payout, only if your FET address belongs to an exchange: enter the memo it shows with the address. A wallet you control usually needs none.

Can I receive FET on another network?

Yes, through a different entry in the coin list, since this page pays FET. The network section on this page links to the entries open for payouts now. Pick the entry before you press Exchange Now.

Why is the FET I received different from the estimate?

The rate floats, so the market can move between the estimate and the moment your deposit confirms. A different deposit amount changes the payout too: if your wallet took its network fee out of the amount, less ETH arrived than you entered.

How do I swap FET back to ETH?

Use the FET to ETH page, linked next to the swap form. It works the same way in reverse: paste an Ethereum address, then send FET to the one-time deposit address.

About these numbers

The calculator and the swap form ask for a live estimate for the amount you type; if one fails to load, try again a few seconds later. The amount table is worked out from the page's latest quote and the network fees in it, so treat it as a guide and use the calculator for your own amount. The daily rates come from xswap.to's own price record, one value per day, and show the market rate before swap fees. Fees and the minimum in the facts table are typical figures with their check date.

Guides for this swap

Related swaps

Popular swaps