Exchange Currencies Track Order Guides Telegram bot

Swap Fetch (FET) to Uniswap (UNI) with no sign-up

Enter the FET amount, paste an Ethereum address from your own wallet, then send FET to the one-time deposit address on your order page. Once the Fetch.ai network has confirmed the deposit, the exchange partner swaps it at the floating rate and sends UNI on Ethereum straight to your address.

Swap UNI to FET instead

Rate
1 FET ≈ 0.0226962 UNI
Network Fee
-
Deposit Fee
-

Enter an address on the Ethereum (ERC-20) network. Coins sent to an address on another network can be lost.

Swap in Telegram

No Account Needed to Start

Swap without creating an account or uploading ID. xswap.to never asks for your seed phrase or private keys, and the exchanged coins go straight to your wallet. In rare cases the exchange partner's compliance check can pause a swap and ask for verification.

Updated Written and checked by the xswap.to team

FET to UNI exchange rate

The FET to UNI rate on this page is an estimate for a real swap after fees, so it reads a little lower than the ratio of the two market prices. It floats with the market until your deposit confirms.

Type any amount into the calculator below for a live figure. The table under it shows what several FET amounts come to in UNI after fees. It is worked out from the page's latest quote and carries that quote's time. The daily table tracks the market rate between the two coins on each recent day, before swap fees, from xswap.to's own price record.

FET to UNI Calculator

Enter an amount to see about how much you would receive. The estimate uses the live floating rate and already includes the payout network fee.

FET Fetch.ai
You get (estimate)
UNI Ethereum ERC-20
20.4266231 UNI
Rate
1 FET ≈ 0.0226962 UNI
Value in USD
≈ $96.38
Network Fee
0.0157347 UNI

FET to UNI conversion table

Estimates after fees, worked out from one live quote taken at . The rate floats: the calculator and the swap form show the live figure.
You sendYou get (estimate after fees)
1,000 FET≈ 22.698 UNI
5,000 FET≈ 113.553 UNI
10,000 FET≈ 227.122 UNI
50,000 FET≈ 1,135.67 UNI
100,000 FET≈ 2,271.36 UNI

FET to UNI daily rate

Market rate before swap fees, from xswap.to's own daily price record, Nov 16, 2026 to Nov 22, 2026.

Highest0.0254922 UNI
Lowest0.0229898 UNI
Change, 6 days−8.83%
0.0254922 0.0229898
Nov 16, 2026Nov 22, 2026
DateRate
1 FET ≈ 0.0229898 UNI
1 FET ≈ 0.0252956 UNI
1 FET ≈ 0.025264 UNI
1 FET ≈ 0.0248181 UNI
1 FET ≈ 0.0250004 UNI
1 FET ≈ 0.0254922 UNI
1 FET ≈ 0.0252169 UNI
Live Market Snapshot Updated Nov 22, 2026 05:57 UTC
1 FET price
$0.1089
1 UNI price
$4.72
1 FET buys
0.02269625 UNI

How to swap FET to UNI

  1. Copy your UNI address

    Open your wallet with Ethereum mainnet selected and copy your 0x address from its receive screen; ETH and every ERC-20 token use that one address. Paste it into Recipient Address and compare the first and last characters.

  2. Enter the FET amount

    Type it in the form at the top. If it is under the pair's minimum, the form shows that minimum and one tap fills it in. The UNI estimate under it already has the payout fee taken out.

  3. Send FET to the deposit address

    Press Exchange Now. Your order page shows a one-time Fetch.ai deposit address: send the amount you entered in one transaction. Send FET from a wallet that holds it on Fetch.ai and also holds enough of the coin the network charges its fee in, usually its own coin. If the order page shows a memo next to the deposit address, add it to your transfer, because a deposit without it cannot be matched to your order.

  4. Follow the order until UNI arrives

    The status moves from waiting to confirming, exchanging, sending and finished. Keep the transaction ID from the order page until the UNI is in your wallet.

What the FET to UNI swap costs

Two costs come out of the estimate before you see it: the exchange margin and the Ethereum network fee for your payout. You pay the Fetch.ai network fee for your deposit yourself, in the coin the network charges fees in, usually its own coin, and your wallet works it out when you send.

The payout fee is a flat amount per payout, so it takes a larger share of a small swap, and the UNI you get per FET drops near the minimum. The facts table below lists the typical network fees and the minimum with the date they were checked.

FET to UNI at a glance

From live exchange data, refreshed hourly.

Item You send You receive
Asset Fetch (Mainnet) (FET) Uniswap (UNI)
Network Fetch.ai Ethereum
Type Native coin ERC-20 token
Contract - 0x1f9840…01F984
Memo / tag Include the memo shown on your order page Not needed
Network fee (typical, checked Nov 22, 2026) None listed ≈ 0.01562 UNI
Route Cross-chain: Fetch.ai to Ethereum
Rate Floating, estimate shown before you send
Minimum to send (typical, checked Nov 22, 2026) 1.493096 FET
Account / ID Not needed to start a swap

How long the FET to UNI swap takes

The FET to UNI swap is three waits in a row: the Fetch.ai network confirms your deposit, the exchange partner swaps it, and the Ethereum network delivers the payout. The time Fetch.ai needs to confirm a deposit depends on the network's design and on how busy it is, and the exchange partner swaps only after the confirmations it requires. In rare cases the partner's compliance check pauses an order, which adds time. The stages in order:

  1. Deposit sent and seen

    Your wallet broadcasts the FET, and the order page moves from waiting to confirming once the deposit is found.

  2. Fetch.ai confirms the deposit

    When the network is busy, a deposit sent with a low fee can wait longer for its first confirmation.

  3. Exchange and UNI payout

    The partner swaps the FET and sends UNI. The status reaches sending, then finished, and the payout hash appears on the order page.

  4. Payout final on Ethereum

    Your wallet shows the payout once it is in a block. About 15 minutes later, two epochs on, Ethereum finalizes that block.

Your UNI address for the payout

An Ethereum address is 0x followed by 40 hexadecimal characters, 42 in total. Mixed-case letters are a checksum (EIP-55), not a different address.

Copy the address from your wallet's receive screen, not from your transaction history, where a scammer's lookalike address can sit next to yours, and compare the first and last characters after pasting. A payout sent to a wrong address cannot be reversed. Mistakes that cost a payout:

  • An exchange deposit address meant for UNI on another network, such as BNB Smart Chain or Base: the exchange may not credit a payout on Ethereum.
  • A token contract address copied from Etherscan instead of your own wallet address: tokens sent to a contract that cannot handle them can be lost.
  • A smart contract wallet such as a Safe, which exists only on networks where it was deployed and can fail to receive ETH from some contracts.

Receiving UNI on Ethereum: address and memo

Memo or tagNot used on this network.
Block exploreretherscan.io

More about swapping on Ethereum

Which network your UNI arrives on

This page pays UNI on Ethereum. The same coin is listed on other networks too, each as its own entry in the coin list, and the links under this section open the ones open for payouts now.

Pick the entry before you press Exchange Now. The same coin on another network is a different asset to your wallet: balances do not carry over, moving it later takes another transfer, and an address on the wrong network can lose the payout. On the sending side, send FET only on Fetch.ai, the network your order page names. FET sent on another network does not reach the deposit address.

After the UNI arrives

The payout shows in your wallet once a block includes it, and you can use it from then on. Ethereum finalizes a block after two epochs of 32 slots, about 15 minutes, and after that only a network attack costing many billions of dollars could change it. You need no ETH to receive the payout, because the sender pays the gas. Moving the UNI later costs gas paid in ETH, so keep some ETH at the same address. If the token does not show in your wallet, add it by its contract address.

If the address belongs to an exchange, check that the exchange credits UNI on Ethereum at that address and what its minimum deposit is; a deposit below the minimum or on a network it does not support may not be credited. To check the payout yourself, open the payout hash from the order page in an Ethereum explorer such as Etherscan.

If your FET deposit is slow or stuck

Look up the transaction ID from your wallet in a block explorer for Fetch.ai. If the explorer cannot find it, the transfer may never have been broadcast, so check your wallet's history first. If it is listed but not yet confirmed, the network may be busy or the fee may be below what it takes now; your wallet's help pages say whether a pending fee can be raised.

Never send the deposit a second time to speed things up: a second payment is a second deposit. If the order page has not moved on after your deposit confirmed, message @xswap_to on Telegram with the Ref. ID from the order page and your deposit hash.

What others can see of your FET to UNI swap

Your deposit is recorded on Fetch.ai for good, and on most networks its amount and both addresses can be read by anyone with a block explorer. The payout, its amount and your 0x address are public on Etherscan, and so is everything that address does later on Ethereum. The exchange partner that processes the swap sees both sides: your deposit and your payout address.

Before you send

  • Send FET only on Fetch.ai, the network your order page names, because a transfer on another network or to a wrong address cannot be reversed.
  • Copy your UNI address from the wallet's receive screen and compare its start and end after pasting.
  • Send the amount you entered in one transaction, and let your wallet add its network fee on top.
  • Bookmark the order page and save its Ref. ID, because the Track Order list is stored only in this browser.

FET to UNI Frequently Asked Questions

How do I swap FET to UNI?

Enter the FET amount and your UNI address in the form at the top, press Exchange Now, and send FET to the one-time deposit address on your order page. After the Fetch.ai network confirms the deposit, the exchange partner sends UNI on Ethereum to your address. No account or email is needed.

How much UNI do I get for 1 FET?

The amount table in the rate section shows it for several sizes, as an estimate after fees with the time of the quote. For your own amount, the FET to UNI calculator asks for a live estimate. No figure is written here, because the rate floats.

How long does FET to UNI take?

There is no set time: the Fetch.ai network confirms the deposit first, then the exchange partner swaps it and sends the UNI payout. The timing section on this page lists each stage, and the order page shows which one you are in.

Is there a minimum amount for FET to UNI?

Yes, every pair has a minimum, and it moves with network conditions. The facts table on this page lists the last checked figure. The swap form warns you when your amount is under the current one. A deposit below it cannot be swapped, and getting those coins back is not assured.

Can I swap Fetch to Uniswap without KYC?

You need no account, and xswap.to asks for no ID. In rare cases the exchange partner's automated anti-money-laundering screening pauses a flagged swap and asks for verification, and the order then shows the status verifying. If that happens, message @xswap_to on Telegram with your transaction ID.

Do I need a memo or tag to swap FET to UNI?

For the deposit, only if the order page shows a memo next to the deposit address: your FET must then carry it to be matched to your order.

Can I receive UNI on another network?

Yes, through a different entry in the coin list, since this page pays UNI on Ethereum. The network section on this page links to the entries open for payouts now. Pick the entry before you press Exchange Now.

Why is the UNI I received different from the estimate?

The rate floats, so the market can move between the estimate and the moment your deposit confirms. A different deposit amount changes the payout too: if your wallet took its network fee out of the amount, less FET arrived than you entered.

How do I swap UNI back to FET?

Use the UNI to FET page, linked next to the swap form. It works the same way in reverse: paste a Fetch.ai address, then send UNI to the one-time deposit address.

About these numbers

The calculator and the swap form ask for a live estimate for the amount you type; if one fails to load, try again a few seconds later. The amount table is worked out from the page's latest quote and the network fees in it, so treat it as a guide and use the calculator for your own amount. The daily rates come from xswap.to's own price record, one value per day, and show the market rate before swap fees. Fees and the minimum in the facts table are typical figures with their check date.

Guides for this swap

Related swaps

Popular swaps