Swap Filecoin (FIL) to Litecoin (LTC) with no sign-up
Enter the FIL amount, paste a Litecoin address from your own wallet, then send FIL to the one-time deposit address on your order page. Once the Filecoin network has confirmed the deposit, the exchange partner swaps it at the floating rate and sends LTC straight to your address.
Swap without creating an account or uploading ID. xswap.to never asks for your seed phrase or private keys, and the exchanged coins go straight to your wallet. In rare cases the exchange partner's compliance check can pause a swap and ask for verification.
The FIL to LTC rate on this page is an estimate for a real swap after fees, so it reads a little lower than the ratio of the two market prices. It floats with the market until your deposit confirms.
Type any amount into the calculator below for a live figure. The table under it shows what several FIL amounts come to in LTC after fees. It is worked out from the page's latest quote and carries that quote's time. The daily table tracks the market rate between the two coins on each recent day, before swap fees, from xswap.to's own price record.
FIL to LTC Calculator
Enter an amount to see about how much you would receive. The estimate uses the live floating rate and already includes the payout network fee.
FILFilecoin
You get (estimate)
LTCLitecoin
Rate
1 FIL ≈ 0.0130564 LTC
Value in USD
≈ $107.17
Network Fee
0.0003 LTC
FIL to LTC conversion table
Estimates after fees, worked out from one live quote taken at . The rate floats: the calculator and the swap form show the live figure.
Market rate before swap fees, from xswap.to's own daily price record, Nov 16, 2026 to Nov 22, 2026.
Highest0.013602 LTC
Lowest0.0129384 LTC
Change, 6 days−4.21%
0.0136020.0129384Nov 16, 2026Nov 22, 2026
Date
Rate
1 FIL ≈ 0.0130296 LTC
1 FIL ≈ 0.0131507 LTC
1 FIL ≈ 0.0134118 LTC
1 FIL ≈ 0.0129384 LTC
1 FIL ≈ 0.0134455 LTC
1 FIL ≈ 0.0135714 LTC
1 FIL ≈ 0.013602 LTC
Live Market SnapshotUpdated Nov 22, 2026 21:14 UTC
1 FIL price
$0.5482
1 LTC price
$41.04
1 FIL buys
0.01305637 LTC
How to swap FIL to LTC
1
Copy your LTC address
Open your Litecoin wallet's receive screen and copy a standard address that starts with L, M or ltc1q, not an MWEB address. Paste it into Recipient Address and compare the first and last characters.
2
Enter the FIL amount
Type it in the form at the top. If it is under the pair's minimum, the form shows that minimum and one tap fills it in. The LTC estimate under it already has the payout fee taken out.
3
Send FIL to the deposit address
Press Exchange Now. Your order page shows a one-time Filecoin deposit address: send the amount you entered in one transaction. Send FIL from a wallet that holds it on Filecoin and also holds enough of the coin the network charges its fee in, usually its own coin.
4
Follow the order until LTC arrives
The status moves from waiting to confirming, exchanging, sending and finished. Keep the transaction ID from the order page until the LTC is in your wallet.
What the FIL to LTC swap costs
Two costs come out of the estimate before you see it: the exchange margin and the Litecoin network fee for your payout. You pay the Filecoin network fee for your deposit yourself, in the coin the network charges fees in, usually its own coin, and your wallet works it out when you send.
The payout fee is a flat amount per payout, so it takes a larger share of a small swap, and the LTC you get per FIL drops near the minimum. The facts table below lists the typical network fees and the minimum with the date they were checked.
FIL to LTC at a glance
From live exchange data, refreshed hourly.
Item
You send
You receive
Asset
Filecoin (FIL)
Litecoin (LTC)
Network
Filecoin
Litecoin
Type
Native coin
Native coin
Memo / tag
Not needed
Not needed
Network fee (typical, checked Nov 22, 2026)
≈ 0.006 FIL
≈ 0.0003 LTC
Route
Cross-chain: Filecoin to Litecoin
Rate
Floating, estimate shown before you send
Minimum to send (typical, checked Nov 22, 2026)
0.0626224 FIL
Account / ID
Not needed to start a swap
How long the FIL to LTC swap takes
The FIL to LTC swap is three waits in a row: the Filecoin network confirms your deposit, the exchange partner swaps it, and the Litecoin network delivers the payout. The time Filecoin needs to confirm a deposit depends on the network's design and on how busy it is, and the exchange partner swaps only after the confirmations it requires. In rare cases the partner's compliance check pauses an order, which adds time. The stages in order:
1Deposit sent and seen
Your wallet broadcasts the FIL, and the order page moves from waiting to confirming once the deposit is found.
2Filecoin confirms the deposit
When the network is busy, a deposit sent with a low fee can wait longer for its first confirmation.
3Exchange and LTC payout
The partner swaps the FIL and sends LTC. The status reaches sending, then finished, and the payout hash appears on the order page.
4Payout confirmed on Litecoin
Your wallet can list the incoming LTC as unconfirmed until a block includes it; Litecoin targets a block every 2.5 minutes.
Your LTC address for the payout
Most Litecoin addresses start with L (legacy), M (script) or ltc1q (native SegWit). The swap form accepted all three in our checks. It rejected an ltc1p (Taproot) address, so use one of the three types above, and not an MWEB address starting with ltcmweb1.
Copy the address from your wallet's receive screen, not from your transaction history, where a scammer's lookalike address can sit next to yours, and compare the first and last characters after pasting. A payout sent to a wrong address cannot be reversed. Mistakes that cost a payout:
An MWEB address from your wallet's MWEB receive mode: the payout is an ordinary Litecoin transaction to a standard address.
An 0x address for LTC as a BEP-20 token on BNB Smart Chain: this listing pays native LTC on the Litecoin network.
An address from a wallet whose recovery phrase you have not written down.
This page pays LTC. The same coin is listed on other networks too, each as its own entry in the coin list, and the links under this section open the ones open for payouts now.
Pick the entry before you press Exchange Now. The same coin on another network is a different asset to your wallet: balances do not carry over, moving it later takes another transfer, and an address on the wrong network can lose the payout. On the sending side, send FIL only on Filecoin, the network your order page names. FIL sent on another network does not reach the deposit address.
The payout is an ordinary Litecoin transaction to your standard address. Your wallet can list it as unconfirmed as soon as it is broadcast, and it gets its first confirmation once a block includes it. Litecoin targets a block every 2.5 minutes, and each further block makes the payment harder to reverse.
If the address belongs to an exchange, check that it is the exchange's LTC deposit address on the Litecoin network and what minimum deposit it sets; exchanges credit a deposit only after their own number of confirmations. To check the payout yourself, open the payout hash from the order page in a Litecoin explorer such as litecoinspace.org.
If your FIL deposit is slow or stuck
Look up the transaction ID from your wallet in a block explorer for Filecoin. If the explorer cannot find it, the transfer may never have been broadcast, so check your wallet's history first. If it is listed but not yet confirmed, the network may be busy or the fee may be below what it takes now; your wallet's help pages say whether a pending fee can be raised.
Never send the deposit a second time to speed things up: a second payment is a second deposit. If the order page has not moved on after your deposit confirmed, message @xswap_to on Telegram with the Ref. ID from the order page and your deposit hash.
What others can see of your FIL to LTC swap
Your deposit is recorded on Filecoin for good, and on most networks its amount and both addresses can be read by anyone with a block explorer. The payout, its amount and your receiving address are visible to anyone on a Litecoin explorer, and they stay that way. The exchange partner that processes the swap sees both sides: your deposit and your payout address.
Before you send
Send FIL only on Filecoin, the network your order page names, because a transfer on another network or to a wrong address cannot be reversed.
Copy your LTC address from the wallet's receive screen and compare its start and end after pasting.
Send the amount you entered in one transaction, and let your wallet add its network fee on top.
Bookmark the order page and save its Ref. ID, because the Track Order list is stored only in this browser.
FIL to LTC Frequently Asked Questions
How do I swap FIL to LTC?
Enter the FIL amount and your LTC address in the form at the top, press Exchange Now, and send FIL to the one-time deposit address on your order page. After the Filecoin network confirms the deposit, the exchange partner sends LTC to your address. No account or email is needed.
How much LTC do I get for 1 FIL?
The amount table in the rate section shows it for several sizes, as an estimate after fees with the time of the quote. For your own amount, the FIL to LTC calculator asks for a live estimate. No figure is written here, because the rate floats.
How long does FIL to LTC take?
There is no set time: the Filecoin network confirms the deposit first, then the exchange partner swaps it and sends the LTC payout. The timing section on this page lists each stage, and the order page shows which one you are in.
Is there a minimum amount for FIL to LTC?
Yes, every pair has a minimum, and it moves with network conditions. The facts table on this page lists the last checked figure. The swap form warns you when your amount is under the current one. A deposit below it cannot be swapped, and getting those coins back is not assured.
Can I swap Filecoin to Litecoin without KYC?
You need no account, and xswap.to asks for no ID. In rare cases the exchange partner's automated anti-money-laundering screening pauses a flagged swap and asks for verification, and the order then shows the status verifying. If that happens, message @xswap_to on Telegram with your transaction ID.
Can I receive LTC on another network?
Yes, through a different entry in the coin list, since this page pays LTC. The network section on this page links to the entries open for payouts now. Pick the entry before you press Exchange Now.
Why is the LTC I received different from the estimate?
The rate floats, so the market can move between the estimate and the moment your deposit confirms. A different deposit amount changes the payout too: if your wallet took its network fee out of the amount, less FIL arrived than you entered.
How do I swap LTC back to FIL?
Use the LTC to FIL page, linked next to the swap form. It works the same way in reverse: paste a Filecoin address, then send LTC to the one-time deposit address.
About these numbers
The calculator and the swap form ask for a live estimate for the amount you type; if one fails to load, try again a few seconds later. The amount table is worked out from the page's latest quote and the network fees in it, so treat it as a guide and use the calculator for your own amount. The daily rates come from xswap.to's own price record, one value per day, and show the market rate before swap fees. Fees and the minimum in the facts table are typical figures with their check date.