Swap Flare (FLR) to Chainlink (LINK) with no sign-up
Enter the FLR amount, paste your 0x address on Arbitrum One from your own wallet, then send FLR to the one-time deposit address on your order page. Once the Flare network has confirmed the deposit, the exchange partner swaps it at the floating rate and sends LINK on Arbitrum One straight to your address.
Swap without creating an account or uploading ID. xswap.to never asks for your seed phrase or private keys, and the exchanged coins go straight to your wallet. In rare cases the exchange partner's compliance check can pause a swap and ask for verification.
The FLR to LINK rate on this page is an estimate for a real swap after fees, so it reads a little lower than the ratio of the two market prices. It floats with the market until your deposit confirms.
Type any amount into the calculator below for a live figure. The table under it shows what several FLR amounts come to in LINK after fees. It is worked out from the page's latest quote and carries that quote's time. The daily table tracks the market rate between the two coins on each recent day, before swap fees, from xswap.to's own price record.
FLR to LINK Calculator
Enter an amount to see about how much you would receive. The estimate uses the live floating rate and already includes the payout network fee.
FLRFlare
You get (estimate)
LINKArbitrumERC-20
Rate
1 FLR ā 0.000569423 LINK
Value in USD
ā $102.87
Network Fee
0.0031072 LINK
FLR to LINK conversion table
Estimates after fees, worked out from one live quote taken at . The rate floats: the calculator and the swap form show the live figure.
Market rate before swap fees, from xswap.to's own daily price record, Nov 16, 2026 to Nov 22, 2026.
Highest0.000582011 LINK
Lowest0.00054104 LINK
Change, 6 days+7.57%
0.0005820110.00054104Nov 16, 2026Nov 22, 2026
Date
Rate
1 FLR ā 0.000582011 LINK
1 FLR ā 0.000564157 LINK
1 FLR ā 0.000555712 LINK
1 FLR ā 0.000558163 LINK
1 FLR ā 0.00055767 LINK
1 FLR ā 0.000547259 LINK
1 FLR ā 0.00054104 LINK
Live Market SnapshotUpdated Nov 22, 2026 20:14 UTC
1 FLR price
$0.00532387
1 LINK price
$9.03
1 FLR buys
0.00056942 LINK
How to swap FLR to LINK
1
Copy your LINK address
Open your wallet with Arbitrum One selected as the network and copy the 0x address from its receive screen. Paste it into Recipient Address and compare the first and last characters.
2
Enter the FLR amount
Type it in the form at the top. If it is under the pair's minimum, the form shows that minimum and one tap fills it in. The LINK estimate under it already has the payout fee taken out.
3
Send FLR to the deposit address
Press Exchange Now. Your order page shows a one-time Flare deposit address: send the amount you entered in one transaction. Send FLR from a wallet that holds it on Flare and also holds enough of the coin the network charges its fee in, usually its own coin.
4
Follow the order until LINK arrives
The status moves from waiting to confirming, exchanging, sending and finished. Keep the transaction ID from the order page until the LINK is in your wallet.
What the FLR to LINK swap costs
Two costs come out of the estimate before you see it: the exchange margin and the Arbitrum One network fee for your payout. You pay the Flare network fee for your deposit yourself, in the coin the network charges fees in, usually its own coin, and your wallet works it out when you send.
The payout fee is a flat amount per payout, so it takes a larger share of a small swap, and the LINK you get per FLR drops near the minimum. The facts table below lists the typical network fees and the minimum with the date they were checked.
FLR to LINK at a glance
From live exchange data, refreshed hourly.
Item
You send
You receive
Asset
Flare (FLR)
Chainlink (Arbitrum One) (LINK)
Network
Flare
Arbitrum One
Type
Native coin
ERC-20 token
Contract
-
0xf97f4dā¦539FB4
Memo / tag
Not needed
Not needed
Network fee (typical, checked Nov 22, 2026)
ā 0.042 FLR
ā 0.003132 LINK
Route
Cross-chain: Flare to Arbitrum One
Rate
Floating, estimate shown before you send
Minimum to send (typical, checked Nov 22, 2026)
11.6316716 FLR
Account / ID
Not needed to start a swap
How long the FLR to LINK swap takes
The FLR to LINK swap is three waits in a row: the Flare network confirms your deposit, the exchange partner swaps it, and the Arbitrum One network delivers the payout. The time Flare needs to confirm a deposit depends on the network's design and on how busy it is, and the exchange partner swaps only after the confirmations it requires. In rare cases the partner's compliance check pauses an order, which adds time. The stages in order:
1Deposit sent and seen
Your wallet broadcasts the FLR, and the order page moves from waiting to confirming once the deposit is found.
2Flare confirms the deposit
When the network is busy, a deposit sent with a low fee can wait longer for its first confirmation.
3Exchange and LINK payout
The partner swaps the FLR and sends LINK. The status reaches sending, then finished, and the payout hash appears on the order page.
4Payout lands on Arbitrum One
Your wallet lists it once an Arbitrum One block includes the transaction, as long as the wallet is set to Arbitrum One.
Your LINK address for the payout
Arbitrum One uses the Ethereum address format: 0x followed by 40 hexadecimal characters, the same address your wallet shows on Ethereum. Copy the address from your wallet's receive screen, not from your transaction history, where a scammer's lookalike address can sit next to yours, and compare the first and last characters after pasting. A payout sent to a wrong address cannot be reversed. Mistakes that cost a payout:
An exchange deposit address meant for Ethereum mainnet or Arbitrum Nova: the payout is sent on Arbitrum One, a separate chain.
An address at a wallet or exchange that does not support Arbitrum One: Arbitrum's FAQ says its team cannot recover such funds; only that wallet or exchange might.
A smart contract wallet address, such as a multisig, that exists on another network but not on Arbitrum One: getting a payout back then depends on deploying that wallet there.
A token contract address copied from Arbiscan instead of your own wallet address: tokens sent to a contract that cannot handle them can be stuck for good.
This page pays LINK on Arbitrum One. The same coin is listed on other networks too, each as its own entry in the coin list, and the links under this section open the ones open for payouts now.
Pick the entry before you press Exchange Now. The same coin on another network is a different asset to your wallet: balances do not carry over, moving it later takes another transfer, and an address on the wrong network can lose the payout.
The payout is an Arbitrum One transaction, not an Ethereum mainnet one, so a wallet set to Ethereum shows nothing of it; switch yours to Arbitrum One. The coins can be moved again once the transaction is in a block, and the transfer is final when its batch is final on Ethereum.
Moving the payout to Ethereum mainnet later takes a bridge. Through the official Arbitrum bridge, a withdrawal takes at least seven days because of the challenge period, and you then claim it on Ethereum with a transaction that needs ETH on Ethereum for gas. Your wallet may list the LINK only after you add the token, and moving it later costs gas in ETH on Arbitrum One, so keep some ETH there.
If the address belongs to an exchange, check that it accepts this coin on Arbitrum One and what its minimum deposit is; for a token, it must support the same contract. Arbitrum tells exchanges to credit deposits only once they are final on Ethereum. To check the payout yourself, open the payout hash from the order page in an Arbitrum One explorer such as Arbiscan.
If your FLR deposit is slow or stuck
Look up the transaction ID from your wallet in a block explorer for Flare. If the explorer cannot find it, the transfer may never have been broadcast, so check your wallet's history first. If it is listed but not yet confirmed, the network may be busy or the fee may be below what it takes now; your wallet's help pages say whether a pending fee can be raised.
Never send the deposit a second time to speed things up: a second payment is a second deposit. If the order page has not moved on after your deposit confirmed, message @xswap_to on Telegram with the Ref. ID from the order page and your deposit hash.
What others can see of your FLR to LINK swap
Your deposit is recorded on Flare for good, and on most networks its amount and both addresses can be read by anyone with a block explorer. The payout, its amount and your receiving address are public on Arbiscan, where anyone who knows the address can see its whole history on Arbitrum One. The exchange partner that processes the swap sees both sides: your deposit and your payout address.
Before you send
Send FLR only on Flare, the network your order page names, because a transfer on another network or to a wrong address cannot be reversed.
Copy your LINK address from the wallet's receive screen and compare its start and end after pasting.
Send the amount you entered in one transaction, and let your wallet add its network fee on top.
Bookmark the order page and save its Ref. ID, because the Track Order list is stored only in this browser.
FLR to LINK Frequently Asked Questions
How do I swap FLR to LINK?
Enter the FLR amount and your LINK address in the form at the top, press Exchange Now, and send FLR to the one-time deposit address on your order page. After the Flare network confirms the deposit, the exchange partner sends LINK on Arbitrum One to your address. No account or email is needed.
How much LINK do I get for 1 FLR?
The amount table in the rate section shows it for several sizes, as an estimate after fees with the time of the quote. For your own amount, the FLR to LINK calculator asks for a live estimate. No figure is written here, because the rate floats.
How long does FLR to LINK take?
There is no set time: the Flare network confirms the deposit first, then the exchange partner swaps it and sends the LINK payout. The timing section on this page lists each stage, and the order page shows which one you are in.
Is there a minimum amount for FLR to LINK?
Yes, every pair has a minimum, and it moves with network conditions. The facts table on this page lists the last checked figure. The swap form warns you when your amount is under the current one. A deposit below it cannot be swapped, and getting those coins back is not assured.
Can I swap Flare to Chainlink without KYC?
You need no account, and xswap.to asks for no ID. In rare cases the exchange partner's automated anti-money-laundering screening pauses a flagged swap and asks for verification, and the order then shows the status verifying. If that happens, message @xswap_to on Telegram with your transaction ID.
Can I receive LINK on another network?
Yes, through a different entry in the coin list, since this page pays LINK on Arbitrum One. The network section on this page links to the entries open for payouts now. Pick the entry before you press Exchange Now.
Why is the LINK I received different from the estimate?
The rate floats, so the market can move between the estimate and the moment your deposit confirms. A different deposit amount changes the payout too: if your wallet took its network fee out of the amount, less FLR arrived than you entered.
How do I swap LINK back to FLR?
Use the LINK to FLR page, linked next to the swap form. It works the same way in reverse: paste a Flare address, then send LINK to the one-time deposit address.
About these numbers
The calculator and the swap form ask for a live estimate for the amount you type; if one fails to load, try again a few seconds later. The amount table is worked out from the page's latest quote and the network fees in it, so treat it as a guide and use the calculator for your own amount. The daily rates come from xswap.to's own price record, one value per day, and show the market rate before swap fees. Fees and the minimum in the facts table are typical figures with their check date.