Exchange Currencies Track Order Guides Telegram bot

Swap GMX to Chainlink (LINK) with no sign-up

Enter the GMX amount, paste your 0x address on Arbitrum One from your own wallet, then send GMX on the Avalanche C-Chain to the one-time deposit address on your order page. Once the Avalanche C-Chain network has confirmed the deposit, the exchange partner swaps it at the floating rate and sends LINK on Arbitrum One straight to your address.

Swap LINK to GMX instead

Rate
1 GMX ā‰ˆ 0.827895 LINK
Network Fee
-
Deposit Fee
-

Enter an address on the Arbitrum One (ERC-20) network. Coins sent to an address on another network can be lost.

Swap in Telegram

No Account Needed to Start

Swap without creating an account or uploading ID. xswap.to never asks for your seed phrase or private keys, and the exchanged coins go straight to your wallet. In rare cases the exchange partner's compliance check can pause a swap and ask for verification.

Updated Written and checked by the xswap.to team

GMX to LINK exchange rate

The GMX to LINK rate on this page is an estimate for a real swap after fees, so it reads a little lower than the ratio of the two market prices. It floats with the market until your deposit confirms.

Type any amount into the calculator below for a live figure. The table under it shows what several GMX amounts come to in LINK after fees. It is worked out from the page's latest quote and carries that quote's time. The daily table tracks the market rate between the two coins on each recent day, before swap fees, from xswap.to's own price record.

GMX to LINK Calculator

Enter an amount to see about how much you would receive. The estimate uses the live floating rate and already includes the payout network fee.

GMX Avalanche ARC-20
You get (estimate)
LINK Arbitrum ERC-20
8.2789516 LINK
Rate
1 GMX ā‰ˆ 0.827895 LINK
Value in USD
ā‰ˆ $71.84
Network Fee
0.0031111 LINK

GMX to LINK conversion table

Estimates after fees, worked out from one live quote taken at . The rate floats: the calculator and the swap form show the live figure.
You sendYou get (estimate after fees)
10 GMXā‰ˆ 8.27895 LINK
50 GMXā‰ˆ 41.5329 LINK
100 GMXā‰ˆ 83.1003 LINK
500 GMXā‰ˆ 415.639 LINK
1,000 GMXā‰ˆ 831.313 LINK
5,000 GMXā‰ˆ 4,156.71 LINK

GMX to LINK daily rate

Market rate before swap fees, from xswap.to's own daily price record, Nov 16, 2026 to Nov 22, 2026.

Highest0.871046 LINK
Lowest0.792558 LINK
Change, 6 days+6.53%
0.871046 0.792558
Nov 16, 2026Nov 22, 2026
DateRate
1 GMX ā‰ˆ 0.8443 LINK
1 GMX ā‰ˆ 0.823278 LINK
1 GMX ā‰ˆ 0.864945 LINK
1 GMX ā‰ˆ 0.871046 LINK
1 GMX ā‰ˆ 0.796388 LINK
1 GMX ā‰ˆ 0.814553 LINK
1 GMX ā‰ˆ 0.792558 LINK
Live Market Snapshot Updated Nov 22, 2026 05:46 UTC
1 GMX price
$7.38
1 LINK price
$8.68
1 GMX buys
0.82789516 LINK

How to swap GMX to LINK

  1. Copy your LINK address

    Open your wallet with Arbitrum One selected as the network and copy the 0x address from its receive screen. Paste it into Recipient Address and compare the first and last characters.

  2. Enter the GMX amount

    Type it in the form at the top. If it is under the pair's minimum, the form shows that minimum and one tap fills it in. The LINK estimate under it already has the payout fee taken out.

  3. Send GMX to the deposit address

    Press Exchange Now. Your order page shows a one-time Avalanche C-Chain deposit address: send the amount you entered in one transaction. Send from a wallet set to the Avalanche C-Chain that holds enough AVAX on the C-Chain for gas; AVAX on the X-Chain or P-Chain cannot pay it.

  4. Follow the order until LINK arrives

    The status moves from waiting to confirming, exchanging, sending and finished. Keep the transaction ID from the order page until the LINK is in your wallet.

What the GMX to LINK swap costs

Two costs come out of the estimate before you see it: the exchange margin and the Arbitrum One network fee for your payout. You pay the C-Chain gas fee yourself, in AVAX: the gas charged, which is at least half the gas limit your wallet sets, times the base fee plus a tip, and both are burned. A token transfer runs the token's contract, so it uses more gas than a plain AVAX transfer, and that gas is paid in AVAX on the C-Chain.

The payout fee is a flat amount per payout, so it takes a larger share of a small swap, and the LINK you get per GMX drops near the minimum. The facts table below lists the typical network fees and the minimum with the date they were checked.

GMX to LINK at a glance

From live exchange data, refreshed hourly.

Item You send You receive
Asset GMX (AVAX C-CHAIN) (GMX) Chainlink (Arbitrum One) (LINK)
Network Avalanche C-Chain Arbitrum One
Type ARC-20 token ERC-20 token
Contract 0x62edc0…11c661 0xf97f4d…539FB4
Memo / tag Not needed Not needed
Network fee (typical, checked Nov 22, 2026) ā‰ˆ 0.0379 GMX ā‰ˆ 0.003132 LINK
Route Cross-chain: Avalanche C-Chain to Arbitrum One
Rate Floating, estimate shown before you send
Minimum to send (typical, checked Nov 22, 2026) 0.0913623 GMX
Account / ID Not needed to start a swap

How long the GMX to LINK swap takes

The GMX to LINK swap is three waits in a row: the Avalanche C-Chain network confirms your deposit, the exchange partner swaps it, and the Arbitrum One network delivers the payout. A C-Chain transaction is final once Avalanche consensus accepts its block, in about a second, and accepted blocks are never reorganized; the exchange partner swaps once your deposit has the confirmations it requires. In rare cases the partner's compliance check pauses an order, which adds time. The stages in order:

  1. Deposit sent and seen

    Your wallet broadcasts the GMX, and the order page moves from waiting to confirming once the deposit is found.

  2. C-Chain consensus accepts the block

    An accepted block is final. The node executes it after acceptance, so receipts and new balances appear once that is done.

  3. Exchange and LINK payout

    The partner swaps the GMX and sends LINK. The status reaches sending, then finished, and the payout hash appears on the order page.

  4. Payout lands on Arbitrum One

    Your wallet lists it once an Arbitrum One block includes the transaction, as long as the wallet is set to Arbitrum One.

Your LINK address for the payout

Arbitrum One uses the Ethereum address format: 0x followed by 40 hexadecimal characters, the same address your wallet shows on Ethereum. Copy the address from your wallet's receive screen, not from your transaction history, where a scammer's lookalike address can sit next to yours, and compare the first and last characters after pasting. A payout sent to a wrong address cannot be reversed. Mistakes that cost a payout:

  • An exchange deposit address meant for Ethereum mainnet or Arbitrum Nova: the payout is sent on Arbitrum One, a separate chain.
  • An address at a wallet or exchange that does not support Arbitrum One: Arbitrum's FAQ says its team cannot recover such funds; only that wallet or exchange might.
  • A smart contract wallet address, such as a multisig, that exists on another network but not on Arbitrum One: getting a payout back then depends on deploying that wallet there.
  • A token contract address copied from Arbiscan instead of your own wallet address: tokens sent to a contract that cannot handle them can be stuck for good.

Receiving LINK on Arbitrum One: address and memo

Memo or tagNot used on this network.
Block explorerarbiscan.io

More about swapping on Arbitrum One

Which network your LINK arrives on

This page pays LINK on Arbitrum One. The same coin is listed on other networks too, each as its own entry in the coin list, and the links under this section open the ones open for payouts now.

Pick the entry before you press Exchange Now. The same coin on another network is a different asset to your wallet: balances do not carry over, moving it later takes another transfer, and an address on the wrong network can lose the payout. On the sending side, send GMX only on the Avalanche C-Chain, the network your order page names. GMX sent on another network does not reach the deposit address.

After the LINK arrives

The payout is an Arbitrum One transaction, not an Ethereum mainnet one, so a wallet set to Ethereum shows nothing of it; switch yours to Arbitrum One. The coins can be moved again once the transaction is in a block, and the transfer is final when its batch is final on Ethereum.

Moving the payout to Ethereum mainnet later takes a bridge. Through the official Arbitrum bridge, a withdrawal takes at least seven days because of the challenge period, and you then claim it on Ethereum with a transaction that needs ETH on Ethereum for gas. Your wallet may list the LINK only after you add the token, and moving it later costs gas in ETH on Arbitrum One, so keep some ETH there.

If the address belongs to an exchange, check that it accepts this coin on Arbitrum One and what its minimum deposit is; for a token, it must support the same contract. Arbitrum tells exchanges to credit deposits only once they are final on Ethereum. To check the payout yourself, open the payout hash from the order page in an Arbitrum One explorer such as Arbiscan.

If your GMX deposit is slow or stuck

Look up the transaction hash on Snowtrace. A deposit that stays pending usually has a max fee below the base fee bound of the next block, which rises while the C-Chain is busier than its target, or it waits behind an earlier pending transaction from your address with a lower nonce. If your wallet offers speed up, use it on the oldest pending one: the wallet resends the same transaction with the same nonce and a higher fee.

Do not press cancel on a deposit, because a cancellation that confirms means nothing reaches the order. The sped-up version has a new hash, so give that one to support. If Snowtrace marks the transaction as failed, the coins stayed in your wallet but the gas was spent, so ask support before you send again. Only the exchange can speed up a withdrawal it sent for you.

Never send the deposit a second time to speed things up: a second payment is a second deposit. If the order page has not moved on after your deposit confirmed, message @xswap_to on Telegram with the Ref. ID from the order page and your deposit hash.

What others can see of your GMX to LINK swap

Your deposit is public on the Avalanche C-Chain: your sending address, the deposit address, the amount and the fee show on Snowtrace, and they stay there. The payout, its amount and your receiving address are public on Arbiscan, where anyone who knows the address can see its whole history on Arbitrum One. The exchange partner that processes the swap sees both sides: your deposit and your payout address.

Before you send

  • If your AVAX sits on the X-Chain or P-Chain, move it to the C-Chain in your wallet first, because only C-Chain AVAX pays C-Chain gas.
  • Copy your LINK address from the wallet's receive screen and compare its start and end after pasting.
  • Send the amount you entered in one transaction, and let your wallet add its network fee on top.
  • Bookmark the order page and save its Ref. ID, because the Track Order list is stored only in this browser.

GMX to LINK Frequently Asked Questions

How do I swap GMX to LINK?

Enter the GMX amount and your LINK address in the form at the top, press Exchange Now, and send GMX on the Avalanche C-Chain to the one-time deposit address on your order page. After the Avalanche C-Chain network confirms the deposit, the exchange partner sends LINK on Arbitrum One to your address. No account or email is needed.

How much LINK do I get for 1 GMX?

The amount table in the rate section shows it for several sizes, as an estimate after fees with the time of the quote. For your own amount, the GMX to LINK calculator asks for a live estimate. No figure is written here, because the rate floats.

How long does GMX to LINK take?

There is no set time: the Avalanche C-Chain network confirms the deposit first, then the exchange partner swaps it and sends the LINK payout. The timing section on this page lists each stage, and the order page shows which one you are in.

Is there a minimum amount for GMX to LINK?

Yes, every pair has a minimum, and it moves with network conditions. The facts table on this page lists the last checked figure. The swap form warns you when your amount is under the current one. A deposit below it cannot be swapped, and getting those coins back is not assured.

Can I swap GMX to Chainlink without KYC?

You need no account, and xswap.to asks for no ID. In rare cases the exchange partner's automated anti-money-laundering screening pauses a flagged swap and asks for verification, and the order then shows the status verifying. If that happens, message @xswap_to on Telegram with your transaction ID.

Can I receive LINK on another network?

Yes, through a different entry in the coin list, since this page pays LINK on Arbitrum One. The network section on this page links to the entries open for payouts now. Pick the entry before you press Exchange Now.

Why is the LINK I received different from the estimate?

The rate floats, so the market can move between the estimate and the moment your deposit confirms. A different deposit amount changes the payout too: if your wallet took its network fee out of the amount, less GMX arrived than you entered.

How do I swap LINK back to GMX?

Use the LINK to GMX page, linked next to the swap form. It works the same way in reverse: paste an Avalanche C-Chain address, then send LINK to the one-time deposit address.

About these numbers

The calculator and the swap form ask for a live estimate for the amount you type; if one fails to load, try again a few seconds later. The amount table is worked out from the page's latest quote and the network fees in it, so treat it as a guide and use the calculator for your own amount. The daily rates come from xswap.to's own price record, one value per day, and show the market rate before swap fees. Fees and the minimum in the facts table are typical figures with their check date.

Guides for this swap

Related swaps

Popular swaps