Enter the GMX amount, paste a Monero address from your own wallet, then send GMX on Arbitrum One to the one-time deposit address on your order page. Once the Arbitrum One network has confirmed the deposit, the exchange partner swaps it at the floating rate and sends XMR straight to your address.
Swap without creating an account or uploading ID. xswap.to never asks for your seed phrase or private keys, and the exchanged coins go straight to your wallet. In rare cases the exchange partner's compliance check can pause a swap and ask for verification.
The GMX to XMR rate on this page is an estimate for a real swap after fees, so it reads a little lower than the ratio of the two market prices. It floats with the market until your deposit confirms.
Type any amount into the calculator below for a live figure. The daily table tracks the market rate between the two coins on each recent day, before swap fees, from xswap.to's own price record.
GMX to XMR Calculator
Enter an amount to see about how much you would receive. The estimate uses the live floating rate and already includes the payout network fee.
GMXArbitrumERC-20
You get (estimate)
XMRMonero
Rate
-
Value in USD
-
Network Fee
-
GMX to XMR daily rate
Market rate before swap fees, from xswap.to's own daily price record, Nov 16, 2026 to Nov 22, 2026.
Highest0.0162734 XMR
Lowest0.014619 XMR
Change, 6 days+0.87%
0.01627340.014619Nov 16, 2026Nov 22, 2026
Date
Rate
1 GMX ≈ 0.0150379 XMR
1 GMX ≈ 0.0162734 XMR
1 GMX ≈ 0.0148305 XMR
1 GMX ≈ 0.0147741 XMR
1 GMX ≈ 0.014619 XMR
1 GMX ≈ 0.0149962 XMR
1 GMX ≈ 0.0149085 XMR
Live Market SnapshotUpdated Nov 22, 2026 10:56 UTC
1 GMX price
$7.62
1 XMR price
$502.40
How to swap GMX to XMR
1
Copy your XMR address
Open your Monero wallet's Receive screen and copy a subaddress, which starts with 8; the primary address, starting with 4, works too, and both are 95 characters long. Paste it into Recipient Address and compare the first and last characters.
2
Enter the GMX amount
Type it in the form at the top. If it is under the pair's minimum, the form shows that minimum and one tap fills it in. The XMR estimate under it already has the payout fee taken out.
3
Send GMX to the deposit address
Press Exchange Now. Your order page shows a one-time Arbitrum One deposit address: send the amount you entered in one transaction. Send from a wallet switched to Arbitrum One that holds some ETH there for gas, and check the network name on the confirmation screen before you approve.
4
Follow the order until XMR arrives
The status moves from waiting to confirming, exchanging, sending and finished. Keep the transaction ID from the order page until the XMR is in your wallet.
What the GMX to XMR swap costs
Two costs come out of the estimate before you see it: the exchange margin and the Monero network fee for your payout. You pay the Arbitrum One network fee yourself, and the network charges it in ETH, for ETH and tokens alike. Your wallet shows one fee that covers the work on Arbitrum and a share of posting the data to Ethereum. Sending GMX on Arbitrum One still costs gas, charged in ETH on Arbitrum One, so most wallets need some ETH there as well as the GMX.
The payout fee is a flat amount per payout, so it takes a larger share of a small swap, and the XMR you get per GMX drops near the minimum. The facts table below lists the typical network fees and the minimum with the date they were checked.
GMX to XMR at a glance
From live exchange data, refreshed hourly.
Item
You send
You receive
Asset
GMX (Arbitrum One) (GMX)
Monero (XMR)
Network
Arbitrum One
Monero
Type
ERC-20 token
Native coin
Contract
0xfc5A1A…35ad0a
-
Memo / tag
Not needed
Not needed
Network fee (typical, checked Nov 22, 2026)
-
≈ 0.009 XMR
Route
Cross-chain: Arbitrum One to Monero
Rate
Floating, estimate shown before you send
Minimum to send (typical, checked Nov 22, 2026)
0.0096604 GMX
Account / ID
Not needed to start a swap
How long the GMX to XMR swap takes
The GMX to XMR swap is three waits in a row: the Arbitrum One network confirms your deposit, the exchange partner swaps it, and the Monero network delivers the payout. Arbitrum One's sequencer, which orders transactions, confirms your deposit provisionally once it puts it in a block. The deposit is final when the batch holding it is posted to Ethereum and final there, and the exchange partner swaps after the confirmations it requires. In rare cases the partner's compliance check pauses an order, which adds time. The stages in order:
1Deposit sent and seen
Your wallet broadcasts the GMX, and the order page moves from waiting to confirming once the deposit is found.
2Arbitrum One sequences the deposit
The sequencer puts it in a block or, if it cannot do so in time, drops it rather than leaving it pending.
3Exchange and XMR payout
The partner swaps the GMX and sends XMR. The status reaches sending, then finished, and the payout hash appears on the order page.
4The 10-block lock ends
Once the payout is in a block, a synced wallet lists it as locked. After 10 blocks, about 20 minutes on average, the XMR counts as spendable balance.
Your XMR address for the payout
A Monero standard address is 95 characters and starts with 4. A subaddress is also 95 characters and starts with 8. An integrated address is 106 characters, starts with 4 and has a payment ID built in. The swap form accepted all three types in our checks.
Copy the address from your wallet's receive screen, not from your transaction history, where a scammer's lookalike address can sit next to yours, and compare the first and last characters after pasting. A payout sent to a wrong address cannot be reversed. Mistakes that cost a payout:
Using an exchange address that needs a separate payment ID, which this form cannot pass on.
Paying out to a new Monero wallet before writing down its seed phrase: without it, the XMR cannot be restored if the device or wallet file is lost.
On the sending side, send GMX only on Arbitrum One, the network your order page names. GMX sent on another network does not reach the deposit address. GMX exists on more than one network, and each is a separate entry in the coin list. Choose the entry that matches the network your coins are on before you create the order.
Monero locks every received output for 10 blocks after the transaction is mined, about 20 minutes on average, and your wallet shows the amount as locked until then. It is a consensus rule of the network, not a hold by the swap, and it applies again to your change whenever you send XMR later.
A wallet that scans the chain on your device finds the payout once it is open and has synced past the payout block. If you restored the wallet from its seed, its restore height must be below the payout block, or the wallet skips the transaction. A block explorer cannot show your balance, because the payout goes to a one-time stealth address and the amount is hidden.
Use an exchange address only if that exchange still accepts XMR deposits in your region and gives you one complete address; if it asks for a separate payment ID next to a normal address, use your own wallet instead. To check the payout yourself, open the payout hash from the order page in a Monero explorer such as xmrchain.net.
If your GMX deposit is slow or stuck
Look up the transaction hash on Arbiscan first. If Arbiscan has no record of it, check which network your wallet sent on: the same 0x address exists on Ethereum, Arbitrum Nova and other EVM networks, but the order waits for a transfer on Arbitrum One only. Most wallets work on one network at a time, so the wrong one is easy to pick.
Arbitrum One keeps no long pending pool: the sequencer holds a transaction for seconds, then puts it in a block or drops it, for example when the base fee has risen above the maximum fee your wallet set. A dropped transaction never runs, so nothing leaves your wallet. If the wallet still lists it as pending, its speed up option, where offered, sends it again with the same nonce, so only one copy can go through; ask support before you make a new transfer.
Never send the deposit a second time to speed things up: a second payment is a second deposit. If the order page has not moved on after your deposit confirmed, message @xswap_to on Telegram with the Ref. ID from the order page and your deposit hash.
What others can see of your GMX to XMR swap
Your deposit is public: the amount, your sending address and the deposit address show on Arbiscan, and the transaction data is also posted to Ethereum. On Monero, outside observers cannot read the payout amount or your receiving address; the chain still shows that a transaction exists, with its block and fee. The exchange partner that processes the swap sees both sides: your deposit and your payout address.
Before you send
Switch your wallet to Arbitrum One and keep some ETH there for gas before you send, even when the deposit is a token.
Copy your XMR address from the wallet's receive screen and compare its start and end after pasting.
Send the amount you entered in one transaction, and let your wallet add its network fee on top.
Bookmark the order page and save its Ref. ID, because the Track Order list is stored only in this browser.
GMX to XMR Frequently Asked Questions
How do I swap GMX to XMR?
Enter the GMX amount and your XMR address in the form at the top, press Exchange Now, and send GMX on Arbitrum One to the one-time deposit address on your order page. After the Arbitrum One network confirms the deposit, the exchange partner sends XMR to your address. No account or email is needed.
How much XMR do I get for 1 GMX?
Type 1 into the GMX to XMR calculator on this page for a live estimate after fees. No figure is written here, because the rate floats and a number in the text would soon be out of date.
How long does GMX to XMR take?
There is no set time: the Arbitrum One network confirms the deposit first, then the exchange partner swaps it and sends the XMR payout. The timing section on this page lists each stage, and the order page shows which one you are in.
Is there a minimum amount for GMX to XMR?
Yes, every pair has a minimum, and it moves with network conditions. The facts table on this page lists the last checked figure. The swap form warns you when your amount is under the current one. A deposit below it cannot be swapped, and getting those coins back is not assured.
Can I swap GMX to Monero without KYC?
You need no account, and xswap.to asks for no ID. In rare cases the exchange partner's automated anti-money-laundering screening pauses a flagged swap and asks for verification, and the order then shows the status verifying. If that happens, message @xswap_to on Telegram with your transaction ID.
Why is the XMR I received different from the estimate?
The rate floats, so the market can move between the estimate and the moment your deposit confirms. A different deposit amount changes the payout too: if your wallet took its network fee out of the amount, less GMX arrived than you entered.
How do I swap XMR back to GMX?
Use the XMR to GMX page, linked next to the swap form. It works the same way in reverse: paste an Arbitrum One address, then send XMR to the one-time deposit address.
About these numbers
The calculator and the swap form ask for a live estimate for the amount you type; if one fails to load, try again a few seconds later. The daily rates come from xswap.to's own price record, one value per day, and show the market rate before swap fees. Fees and the minimum in the facts table are typical figures with their check date.