Swap Hyperliquid (HYPE) to Ape and Pepe (APEPE) with no sign-up
Enter the HYPE amount, paste a Polygon PoS address from your own wallet, then send HYPE on HyperEVM to the one-time deposit address on your order page. Once the HyperEVM network has confirmed the deposit, the exchange partner swaps it at the floating rate and sends APEPE on Polygon PoS straight to your address.
Swap without creating an account or uploading ID. xswap.to never asks for your seed phrase or private keys, and the exchanged coins go straight to your wallet. In rare cases the exchange partner's compliance check can pause a swap and ask for verification.
The HYPE to APEPE rate on this page is an estimate for a real swap after fees, so it reads a little lower than the ratio of the two market prices. It floats with the market until your deposit confirms. Type any amount into the calculator below for a live figure.
HYPE to APEPE Calculator
Enter an amount to see about how much you would receive. The estimate uses the live floating rate and already includes the payout network fee.
HYPEHyperEVM
You get (estimate)
APEPEPolygonERC-20
Rate
-
Value in USD
-
Network Fee
-
Live Market SnapshotUpdated Nov 22, 2026 08:52 UTC
1 HYPE price
$62.52
How to swap HYPE to APEPE
1
Copy your APEPE address
Open your wallet with Polygon PoS selected, which wallets may list as Polygon or Polygon Mainnet, and copy your 0x address from its receive screen. Paste it into Recipient Address and compare the first and last characters.
2
Enter the HYPE amount
Type it in the form at the top. If it is under the pair's minimum, the form shows that minimum and one tap fills it in. The APEPE estimate under it already has the payout fee taken out.
3
Send HYPE to the deposit address
Press Exchange Now. Your order page shows a one-time HyperEVM deposit address: send the amount you entered in one transaction. Send from a wallet set to HyperEVM, chain ID 999, with the HYPE in its HyperEVM balance; Hyperliquid's spot balances on HyperCore are a separate part of the chain.
4
Follow the order until APEPE arrives
The status moves from waiting to confirming, exchanging, sending and finished. Keep the transaction ID from the order page until the APEPE is in your wallet.
What the HYPE to APEPE swap costs
Two costs come out of the estimate before you see it: the exchange margin and the Polygon PoS network fee for your payout. You pay the HyperEVM gas fee yourself in HYPE, for HYPE and tokens alike; like Ethereum it has a base fee and a priority fee, both burned, and your wallet sets them. When you send HYPE, the gas comes out of the same HyperEVM balance, so the wallet needs the amount you entered plus the gas.
The payout fee is a flat amount per payout, so it takes a larger share of a small swap, and the APEPE you get per HYPE drops near the minimum.
HYPE to APEPE at a glance
From live exchange data, refreshed hourly.
Item
You send
You receive
Asset
Hyperliquid (HyperEVM) (HYPE)
Ape and Pepe (APEPE)
Network
HyperEVM
Polygon PoS
Type
Native coin
ERC-20 token
Contract
-
0xA3f751…D63D3A
Memo / tag
Not needed
Not needed
Network fee (typical, checked Nov 22, 2026)
≈ 0.00021 HYPE
-
Route
Cross-chain: HyperEVM to Polygon PoS
Rate
Floating, estimate shown before you send
Account / ID
Not needed to start a swap
How long the HYPE to APEPE swap takes
The HYPE to APEPE swap is three waits in a row: the HyperEVM network confirms your deposit, the exchange partner swaps it, and the Polygon PoS network delivers the payout. HyperEVM blocks are part of Hyperliquid's own execution and run under its HyperBFT consensus; ordinary transfers like your deposit go into small blocks built about every second. The exchange partner swaps after the confirmations it requires. In rare cases the partner's compliance check pauses an order, which adds time. The stages in order:
1Deposit sent and seen
Your wallet broadcasts the HYPE, and the order page moves from waiting to confirming once the deposit is found.
2A HyperEVM block includes it
A maximum fee below the current base fee leaves it waiting until the base fee falls or the fee is raised.
3Exchange and APEPE payout
The partner swaps the HYPE and sends APEPE. The status reaches sending, then finished, and the payout hash appears on the order page.
4Payout final on Polygon PoS
Your wallet shows the payout once a block includes it, and a milestone then finalizes that block for good.
Your APEPE address for the payout
Polygon PoS uses the Ethereum address format: 0x followed by 40 hexadecimal characters. Copy the address from your wallet's receive screen, not from your transaction history, where a scammer's lookalike address can sit next to yours, and compare the first and last characters after pasting. A payout sent to a wrong address cannot be reversed. Mistakes that cost a payout:
An exchange deposit address meant for APEPE on Ethereum or another network: the 0x address can look the same, but the exchange may not credit a Polygon PoS payout.
A token contract address copied from PolygonScan instead of your own wallet address: tokens sent to a contract that cannot handle them can be lost.
A multisig or other smart contract wallet deployed on another network but not on Polygon PoS, where a payout stays stuck unless the wallet can be recreated there.
The payout shows in your wallet once a block includes it, and a later milestone finalizes that block, after which it cannot be reorganized. You need no POL to receive the payout, because the sender pays the gas. A wallet that still shows MATIC as the network's own coin is showing the same POL balance under the old symbol. Moving the APEPE later costs gas paid in POL, so keep some POL at that address. Some tokens have two versions on Polygon PoS with different contracts, such as native USDC and bridged USDC.e, and exchanges may accept only one.
If the address belongs to an exchange, check that the exchange credits APEPE on Polygon PoS, not only on Ethereum, and what its minimum deposit is; a deposit on a network it does not support may not be credited. To check the payout yourself, open the payout hash from the order page in a Polygon PoS explorer such as PolygonScan.
If your HYPE deposit is slow or stuck
Look up the transaction hash on hyperevmscan.io. If it is not there, check where you sent from: a transfer made from Hyperliquid's spot balances happens on HyperCore, and a wallet set to another EVM network sends on that network, but the order waits for a transfer on HyperEVM only.
HyperEVM uses a base fee and a priority fee like Ethereum, and its gas spikes when demand outruns its block space; a deposit with a maximum fee below the base fee then waits. Its onchain mempool accepts only the next 8 nonces of each address and prunes transactions older than 1 day, and a pruned transaction moves no coins. A wallet's speed up option sends a replacement with the same nonce and a higher fee; ask support before you make a new transfer.
Never send the deposit a second time to speed things up: a second payment is a second deposit. If the order page has not moved on after your deposit confirmed, message @xswap_to on Telegram with the Ref. ID from the order page and your deposit hash.
What others can see of your HYPE to APEPE swap
Your deposit is public: the amount, your sending address and the deposit address show on HyperEVM explorers such as hyperevmscan.io. The payout, its amount and your 0x address are public on PolygonScan, and so is everything that address does later on Polygon PoS. The exchange partner that processes the swap sees both sides: your deposit and your payout address.
Before you send
Set your wallet to HyperEVM and keep some HYPE in its HyperEVM balance for gas before you send the deposit.
Copy your APEPE address from the wallet's receive screen and compare its start and end after pasting.
Send the amount you entered in one transaction, and let your wallet add its network fee on top.
Bookmark the order page and save its Ref. ID, because the Track Order list is stored only in this browser.
HYPE to APEPE Frequently Asked Questions
How do I swap HYPE to APEPE?
Enter the HYPE amount and your APEPE address in the form at the top, press Exchange Now, and send HYPE on HyperEVM to the one-time deposit address on your order page. After the HyperEVM network confirms the deposit, the exchange partner sends APEPE on Polygon PoS to your address. No account or email is needed.
How much APEPE do I get for 1 HYPE?
Type 1 into the HYPE to APEPE calculator on this page for a live estimate after fees. No figure is written here, because the rate floats and a number in the text would soon be out of date.
How long does HYPE to APEPE take?
There is no set time: the HyperEVM network confirms the deposit first, then the exchange partner swaps it and sends the APEPE payout. The timing section on this page lists each stage, and the order page shows which one you are in.
Is there a minimum amount for HYPE to APEPE?
Yes, every pair has a minimum, and it moves with network conditions. The swap form warns you when your amount is under the current one. A deposit below it cannot be swapped, and getting those coins back is not assured.
Can I swap Hyperliquid to Ape and Pepe without KYC?
You need no account, and xswap.to asks for no ID. In rare cases the exchange partner's automated anti-money-laundering screening pauses a flagged swap and asks for verification, and the order then shows the status verifying. If that happens, message @xswap_to on Telegram with your transaction ID.
Why is the APEPE I received different from the estimate?
The rate floats, so the market can move between the estimate and the moment your deposit confirms. A different deposit amount changes the payout too: if your wallet took its network fee out of the amount, less HYPE arrived than you entered.
How do I swap APEPE back to HYPE?
Use the APEPE to HYPE page, linked next to the swap form. It works the same way in reverse: paste a HyperEVM address, then send APEPE to the one-time deposit address.
About these numbers
The calculator and the swap form ask for a live estimate for the amount you type; if one fails to load, try again a few seconds later.