Swap Hyperliquid (HYPE) to JetTon Games (JETTON) with no sign-up
Enter the HYPE amount, paste a TON wallet address from your own wallet, then send HYPE on HyperEVM to the one-time deposit address on your order page. Once the HyperEVM network has confirmed the deposit, the exchange partner swaps it at the floating rate and sends JETTON on TON straight to your address.
Swap without creating an account or uploading ID. xswap.to never asks for your seed phrase or private keys, and the exchanged coins go straight to your wallet. In rare cases the exchange partner's compliance check can pause a swap and ask for verification.
The HYPE to JETTON rate on this page is an estimate for a real swap after fees, so it reads a little lower than the ratio of the two market prices. It floats with the market until your deposit confirms. Type any amount into the calculator below for a live figure.
HYPE to JETTON Calculator
Enter an amount to see about how much you would receive. The estimate uses the live floating rate and already includes the payout network fee.
HYPEHyperEVM
You get (estimate)
JETTONTONJetton
Rate
-
Value in USD
-
Network Fee
-
Live Market SnapshotUpdated Nov 22, 2026 07:29 UTC
1 HYPE price
$61.53
How to swap HYPE to JETTON
1
Copy your JETTON address
Open your TON wallet's receive screen and copy the address it shows, which usually starts with UQ, the non-bounceable form wallet apps use for receiving. Paste it into Recipient Address and compare the first and last characters.
2
Enter the HYPE amount
Type it in the form at the top. If it is under the pair's minimum, the form shows that minimum and one tap fills it in. The JETTON estimate under it already has the payout fee taken out.
3
Send HYPE to the deposit address
Press Exchange Now. Your order page shows a one-time HyperEVM deposit address: send the amount you entered in one transaction. Send from a wallet set to HyperEVM, chain ID 999, with the HYPE in its HyperEVM balance; Hyperliquid's spot balances on HyperCore are a separate part of the chain.
4
Follow the order until JETTON arrives
The status moves from waiting to confirming, exchanging, sending and finished. Keep the transaction ID from the order page until the JETTON is in your wallet.
What the HYPE to JETTON swap costs
Two costs come out of the estimate before you see it: the exchange margin and the TON network fee for your payout. You pay the HyperEVM gas fee yourself in HYPE, for HYPE and tokens alike; like Ethereum it has a base fee and a priority fee, both burned, and your wallet sets them. When you send HYPE, the gas comes out of the same HyperEVM balance, so the wallet needs the amount you entered plus the gas.
The payout fee is a flat amount per payout, so it takes a larger share of a small swap, and the JETTON you get per HYPE drops near the minimum.
HYPE to JETTON at a glance
From live exchange data, refreshed hourly.
Item
You send
You receive
Asset
Hyperliquid (HyperEVM) (HYPE)
JetTon Games (JETTON)
Network
HyperEVM
TON
Type
Native coin
Jetton token
Contract
-
EQAQXlWJ…JetTon
Memo / tag
Not needed
Not needed
Network fee (typical, checked Nov 22, 2026)
≈ 0.00021 HYPE
-
Route
Cross-chain: HyperEVM to TON
Rate
Floating, estimate shown before you send
Account / ID
Not needed to start a swap
How long the HYPE to JETTON swap takes
The HYPE to JETTON swap is three waits in a row: the HyperEVM network confirms your deposit, the exchange partner swaps it, and the TON network delivers the payout. HyperEVM blocks are part of Hyperliquid's own execution and run under its HyperBFT consensus; ordinary transfers like your deposit go into small blocks built about every second. The exchange partner swaps after the confirmations it requires. In rare cases the partner's compliance check pauses an order, which adds time. The stages in order:
1Deposit sent and seen
Your wallet broadcasts the HYPE, and the order page moves from waiting to confirming once the deposit is found.
2A HyperEVM block includes it
A maximum fee below the current base fee leaves it waiting until the base fee falls or the fee is raised.
3Exchange and JETTON payout
The partner swaps the HYPE and sends JETTON. The status reaches sending, then finished, and the payout hash appears on the order page.
4Payout final on TON
Your wallet lists the JETTON under your address once the transfer is in a block, and a masterchain block then makes it final.
Your JETTON address for the payout
A TON wallet address is usually shown as 48 characters of letters, digits, hyphens and the underline sign, starting with UQ (non-bounceable, the form meant for wallets) or EQ (bounceable). The raw form is 0: followed by 64 hex characters. All forms point to the same account; for a new, unused wallet, give the UQ form.
Copy the address from your wallet's receive screen, not from your transaction history, where a scammer's lookalike address can sit next to yours, and compare the first and last characters after pasting. A payout sent to a wrong address cannot be reversed. Mistakes that cost a payout:
The EQ form of a wallet that has never sent anything: Gram (TON) sent in bounceable form to an undeployed wallet returns to the sender, so give the UQ form.
An exchange deposit address that needs a memo, entered without it or for a coin whose listing here has no memo field: the exchange cannot match the payout automatically.
A Jetton wallet or Jetton master address copied from an explorer: payouts must go to your regular wallet address, the one your wallet app shows.
The payout is final once a masterchain block includes it, which normally takes about a second, and your wallet lists it under the address you pasted. If nothing shows, compare the wallet app's address with the one on the order page: one recovery phrase can control several TON wallets, one per wallet version, each with its own address and balance. Your JETTON sits in a separate Jetton wallet contract linked to your address, which the incoming transfer opens if needed with Gram (TON) the sender attaches; moving it later takes Gram (TON) for fees, unless your wallet app offers gasless transfers.
If the address belongs to an exchange, check that the exchange gives it for JETTON deposits on the TON network, note its minimum deposit, and enter the memo it shows; when the form has no memo field for JETTON, receive to your own wallet instead. To check the payout yourself, open the payout hash from the order page in a TON explorer such as Tonviewer.
If your HYPE deposit is slow or stuck
Look up the transaction hash on hyperevmscan.io. If it is not there, check where you sent from: a transfer made from Hyperliquid's spot balances happens on HyperCore, and a wallet set to another EVM network sends on that network, but the order waits for a transfer on HyperEVM only.
HyperEVM uses a base fee and a priority fee like Ethereum, and its gas spikes when demand outruns its block space; a deposit with a maximum fee below the base fee then waits. Its onchain mempool accepts only the next 8 nonces of each address and prunes transactions older than 1 day, and a pruned transaction moves no coins. A wallet's speed up option sends a replacement with the same nonce and a higher fee; ask support before you make a new transfer.
Never send the deposit a second time to speed things up: a second payment is a second deposit. If the order page has not moved on after your deposit confirmed, message @xswap_to on Telegram with the Ref. ID from the order page and your deposit hash.
What others can see of your HYPE to JETTON swap
Your deposit is public: the amount, your sending address and the deposit address show on HyperEVM explorers such as hyperevmscan.io. The payout, its amount and your receiving address are visible to anyone in a TON explorer, together with your wallet's balance and token holdings. The exchange partner that processes the swap sees both sides: your deposit and your payout address.
Before you send
Set your wallet to HyperEVM and keep some HYPE in its HyperEVM balance for gas before you send the deposit.
Copy your JETTON address from the wallet's receive screen and compare its start and end after pasting.
Send the amount you entered in one transaction, and let your wallet add its network fee on top.
Bookmark the order page and save its Ref. ID, because the Track Order list is stored only in this browser.
HYPE to JETTON Frequently Asked Questions
How do I swap HYPE to JETTON?
Enter the HYPE amount and your JETTON address in the form at the top, press Exchange Now, and send HYPE on HyperEVM to the one-time deposit address on your order page. After the HyperEVM network confirms the deposit, the exchange partner sends JETTON on TON to your address. No account or email is needed.
How much JETTON do I get for 1 HYPE?
Type 1 into the HYPE to JETTON calculator on this page for a live estimate after fees. No figure is written here, because the rate floats and a number in the text would soon be out of date.
How long does HYPE to JETTON take?
There is no set time: the HyperEVM network confirms the deposit first, then the exchange partner swaps it and sends the JETTON payout. The timing section on this page lists each stage, and the order page shows which one you are in.
Is there a minimum amount for HYPE to JETTON?
Yes, every pair has a minimum, and it moves with network conditions. The swap form warns you when your amount is under the current one. A deposit below it cannot be swapped, and getting those coins back is not assured.
Can I swap Hyperliquid to JetTon Games without KYC?
You need no account, and xswap.to asks for no ID. In rare cases the exchange partner's automated anti-money-laundering screening pauses a flagged swap and asks for verification, and the order then shows the status verifying. If that happens, message @xswap_to on Telegram with your transaction ID.
Why is the JETTON I received different from the estimate?
The rate floats, so the market can move between the estimate and the moment your deposit confirms. A different deposit amount changes the payout too: if your wallet took its network fee out of the amount, less HYPE arrived than you entered.
How do I swap JETTON back to HYPE?
Use the JETTON to HYPE page, linked next to the swap form. It works the same way in reverse: paste a HyperEVM address, then send JETTON to the one-time deposit address.
About these numbers
The calculator and the swap form ask for a live estimate for the amount you type; if one fails to load, try again a few seconds later.