Swap Hyperliquid (HYPE) to Toncoin (TON) with no sign-up
Enter the HYPE amount, paste a TON wallet address from your own wallet, then send HYPE on HyperEVM to the one-time deposit address on your order page. Once the HyperEVM network has confirmed the deposit, the exchange partner swaps it at the floating rate and sends TON straight to your address.
Swap without creating an account or uploading ID. xswap.to never asks for your seed phrase or private keys, and the exchanged coins go straight to your wallet. In rare cases the exchange partner's compliance check can pause a swap and ask for verification.
The HYPE to TON rate on this page is an estimate for a real swap after fees, so it reads a little lower than the ratio of the two market prices. It floats with the market until your deposit confirms.
Type any amount into the calculator below for a live figure. The table under it shows what several HYPE amounts come to in TON after fees. It is worked out from the page's latest quote and carries that quote's time. The daily table tracks the market rate between the two coins on each recent day, before swap fees, from xswap.to's own price record.
HYPE to TON Calculator
Enter an amount to see about how much you would receive. The estimate uses the live floating rate and already includes the payout network fee.
HYPEHyperEVM
You get (estimate)
TONTON
Rate
1 HYPE ≈ 63.2146 TON
Value in USD
≈ $65.75
Network Fee
0.0075 TON
HYPE to TON conversion table
Estimates after fees, worked out from one live quote taken at . The rate floats: the calculator and the swap form show the live figure.
Market rate before swap fees, from xswap.to's own daily price record, Nov 16, 2026 to Nov 20, 2026.
Highest66.0767 TON
Lowest62.3839 TON
Change, 4 days+4.97%
Date
Rate
1 HYPE ≈ 65.485 TON
1 HYPE ≈ 65.455 TON
1 HYPE ≈ 63.8978 TON
1 HYPE ≈ 66.0767 TON
1 HYPE ≈ 62.3839 TON
Live Market SnapshotUpdated Nov 20, 2026 02:04 UTC
1 HYPE price
$67.18
1 TON price
$1.04
1 HYPE buys
63.2145614 TON
How to swap HYPE to TON
1
Copy your TON address
Open your TON wallet's receive screen and copy the address it shows, which usually starts with UQ, the non-bounceable form wallet apps use for receiving. Paste it into Recipient Address and compare the first and last characters. If the address comes from an exchange, also enter the memo it shows with the address.
2
Enter the HYPE amount
Type it in the form at the top. If it is under the pair's minimum, the form shows that minimum and one tap fills it in. The TON estimate under it already has the payout fee taken out.
3
Send HYPE to the deposit address
Press Exchange Now. Your order page shows a one-time HyperEVM deposit address: send the amount you entered in one transaction. Send from a wallet set to HyperEVM, chain ID 999, with the HYPE in its HyperEVM balance; Hyperliquid's spot balances on HyperCore are a separate part of the chain.
4
Follow the order until TON arrives
The status moves from waiting to confirming, exchanging, sending and finished. Keep the transaction ID from the order page until the TON is in your wallet.
What the HYPE to TON swap costs
Two costs come out of the estimate before you see it: the exchange margin and the TON network fee for your payout. You pay the HyperEVM gas fee yourself in HYPE, for HYPE and tokens alike; like Ethereum it has a base fee and a priority fee, both burned, and your wallet sets them. When you send HYPE, the gas comes out of the same HyperEVM balance, so the wallet needs the amount you entered plus the gas.
The payout fee is a flat amount per payout, so it takes a larger share of a small swap, and the TON you get per HYPE drops near the minimum. The facts table below lists the typical network fees and the minimum with the date they were checked.
HYPE to TON at a glance
From live exchange data, refreshed hourly.
Item
You send
You receive
Asset
Hyperliquid (HyperEVM) (HYPE)
Toncoin (TON)
Network
HyperEVM
TON
Type
Native coin
Native coin
Memo / tag
Not needed
Required with your address
Network fee (typical, checked Nov 19, 2026)
≈ 0.00021 HYPE
≈ 0.0075 TON
Route
Cross-chain: HyperEVM to TON
Rate
Floating, estimate shown before you send
Minimum to send (typical, checked Nov 20, 2026)
0.0022867 HYPE
Account / ID
Not needed to start a swap
How long the HYPE to TON swap takes
The HYPE to TON swap is three waits in a row: the HyperEVM network confirms your deposit, the exchange partner swaps it, and the TON network delivers the payout. HyperEVM blocks are part of Hyperliquid's own execution and run under its HyperBFT consensus; ordinary transfers like your deposit go into small blocks built about every second. The exchange partner swaps after the confirmations it requires. In rare cases the partner's compliance check pauses an order, which adds time. The stages in order:
1Deposit sent and seen
Your wallet broadcasts the HYPE, and the order page moves from waiting to confirming once the deposit is found.
2A HyperEVM block includes it
A maximum fee below the current base fee leaves it waiting until the base fee falls or the fee is raised.
3Exchange and TON payout
The partner swaps the HYPE and sends TON. The status reaches sending, then finished, and the payout hash appears on the order page.
4Payout final on TON
Your wallet lists the TON under your address once the transfer is in a block, and a masterchain block then makes it final.
Your TON address for the payout
A TON wallet address is usually shown as 48 characters of letters, digits, hyphens and the underline sign, starting with UQ (non-bounceable, the form meant for wallets) or EQ (bounceable). The raw form is 0: followed by 64 hex characters. All forms point to the same account; for a new, unused wallet, give the UQ form.
Copy the address from your wallet's receive screen, not from your transaction history, where a scammer's lookalike address can sit next to yours, and compare the first and last characters after pasting. A payout sent to a wrong address cannot be reversed. TON can also carry a memo. If your address comes from an exchange, enter the memo it gives you, because the exchange uses it to credit your account; a wallet you control usually needs none. Mistakes that cost a payout:
The EQ form of a wallet that has never sent anything: Gram (TON) sent in bounceable form to an undeployed wallet returns to the sender, so give the UQ form.
An exchange deposit address that needs a memo, entered without it or for a coin whose listing here has no memo field: the exchange cannot match the payout automatically.
A Jetton wallet or Jetton master address copied from an explorer: payouts must go to your regular wallet address, the one your wallet app shows.
Receiving TON on TON: address and memo
Memo or tag
Needed when the receiving wallet asks for one, which exchange accounts usually do. Enter it in the memo field of the form.
This page pays TON. The same coin is listed on other networks too, each as its own entry in the coin list, and the links under this section open the ones open for payouts now.
Pick the entry before you press Exchange Now. The same coin on another network is a different asset to your wallet: balances do not carry over, moving it later takes another transfer, and an address on the wrong network can lose the payout.
The payout is final once a masterchain block includes it, which normally takes about a second, and your wallet lists it under the address you pasted. If nothing shows, compare the wallet app's address with the one on the order page: one recovery phrase can control several TON wallets, one per wallet version, each with its own address and balance. TON sent to a wallet that has never sent anything stays in its address, and your wallet app deploys the wallet contract with your first outgoing transfer, usually paying for that from the balance.
If the address belongs to an exchange, check that the exchange gives it for TON deposits on the TON network, note its minimum deposit, and enter the memo it shows; when the form has no memo field for TON, receive to your own wallet instead. To check the payout yourself, open the payout hash from the order page in a TON explorer such as Tonviewer.
If your HYPE deposit is slow or stuck
Look up the transaction hash on hyperevmscan.io. If it is not there, check where you sent from: a transfer made from Hyperliquid's spot balances happens on HyperCore, and a wallet set to another EVM network sends on that network, but the order waits for a transfer on HyperEVM only.
HyperEVM uses a base fee and a priority fee like Ethereum, and its gas spikes when demand outruns its block space; a deposit with a maximum fee below the base fee then waits. Its onchain mempool accepts only the next 8 nonces of each address and prunes transactions older than 1 day, and a pruned transaction moves no coins. A wallet's speed up option sends a replacement with the same nonce and a higher fee; ask support before you make a new transfer.
Never send the deposit a second time to speed things up: a second payment is a second deposit. If the order page has not moved on after your deposit confirmed, message @xswap_to on Telegram with the Ref. ID from the order page and your deposit hash.
What others can see of your HYPE to TON swap
Your deposit is public: the amount, your sending address and the deposit address show on HyperEVM explorers such as hyperevmscan.io. The payout, its amount and your receiving address are visible to anyone in a TON explorer, together with your wallet's balance and token holdings. The exchange partner that processes the swap sees both sides: your deposit and your payout address.
Before you send
Set your wallet to HyperEVM and keep some HYPE in its HyperEVM balance for gas before you send the deposit.
Copy your TON address from the wallet's receive screen and compare its start and end after pasting.
Enter the memo your exchange gives you for TON, or the payout cannot be credited to your account.
Send the amount you entered in one transaction, and let your wallet add its network fee on top.
Bookmark the order page and save its Ref. ID, because the Track Order list is stored only in this browser.
HYPE to TON Frequently Asked Questions
How do I swap HYPE to TON?
Enter the HYPE amount and your TON address in the form at the top, press Exchange Now, and send HYPE on HyperEVM to the one-time deposit address on your order page. After the HyperEVM network confirms the deposit, the exchange partner sends TON to your address. No account or email is needed.
How much TON do I get for 1 HYPE?
The amount table in the rate section shows it for several sizes, as an estimate after fees with the time of the quote. For your own amount, the HYPE to TON calculator asks for a live estimate. No figure is written here, because the rate floats.
How long does HYPE to TON take?
There is no set time: the HyperEVM network confirms the deposit first, then the exchange partner swaps it and sends the TON payout. The timing section on this page lists each stage, and the order page shows which one you are in.
Is there a minimum amount for HYPE to TON?
Yes, every pair has a minimum, and it moves with network conditions. The facts table on this page lists the last checked figure. The swap form warns you when your amount is under the current one. A deposit below it cannot be swapped, and getting those coins back is not assured.
Can I swap Hyperliquid to Toncoin without KYC?
You need no account, and xswap.to asks for no ID. In rare cases the exchange partner's automated anti-money-laundering screening pauses a flagged swap and asks for verification, and the order then shows the status verifying. If that happens, message @xswap_to on Telegram with your transaction ID.
Do I need a memo or tag to swap HYPE to TON?
For the payout, only if your TON address belongs to an exchange: enter the memo it shows with the address. A wallet you control usually needs none.
Can I receive TON on another network?
Yes, through a different entry in the coin list, since this page pays TON. The network section on this page links to the entries open for payouts now. Pick the entry before you press Exchange Now.
Why is the TON I received different from the estimate?
The rate floats, so the market can move between the estimate and the moment your deposit confirms. A different deposit amount changes the payout too: if your wallet took its network fee out of the amount, less HYPE arrived than you entered.
How do I swap TON back to HYPE?
Use the TON to HYPE page, linked next to the swap form. It works the same way in reverse: paste a HyperEVM address, then send TON to the one-time deposit address.
About these numbers
The calculator and the swap form ask for a live estimate for the amount you type; if one fails to load, try again a few seconds later. The amount table is worked out from the page's latest quote and the network fees in it, so treat it as a guide and use the calculator for your own amount. The daily rates come from xswap.to's own price record, one value per day, and show the market rate before swap fees. Fees and the minimum in the facts table are typical figures with their check date.