Swap Injective (INJ) to Ripple USD (RLUSD) with no sign-up
Enter the INJ amount, paste an Ethereum address from your own wallet, then send INJ to the one-time deposit address on your order page. Once the Injective network has confirmed the deposit, the exchange partner swaps it at the floating rate and sends RLUSD on Ethereum straight to your address.
Swap without creating an account or uploading ID. xswap.to never asks for your seed phrase or private keys, and the exchanged coins go straight to your wallet. In rare cases the exchange partner's compliance check can pause a swap and ask for verification.
The INJ to RLUSD rate on this page is an estimate for a real swap after fees, so it reads a little lower than the ratio of the two market prices. It floats with the market until your deposit confirms.
Type any amount into the calculator below for a live figure. The table under it shows what several INJ amounts come to in RLUSD after fees. It is worked out from the page's latest quote and carries that quote's time.
INJ to RLUSD Calculator
Enter an amount to see about how much you would receive. The estimate uses the live floating rate and already includes the payout network fee.
INJInjective
You get (estimate)
RLUSDEthereumERC-20
Rate
1 INJ ≈ 6.08915 RLUSD
Value in USD
≈ $124.86
Network Fee
0.1358627 RLUSD
INJ to RLUSD conversion table
Estimates after fees, worked out from one live quote taken at . The rate floats: the calculator and the swap form show the live figure.
Live Market SnapshotUpdated Nov 22, 2026 19:18 UTC
1 INJ price
$6.36
1 RLUSD price
$1.03
1 INJ buys
6.08914898 RLUSD
How to swap INJ to RLUSD
1
Copy your RLUSD address
Open your wallet with Ethereum mainnet selected and copy your 0x address from its receive screen; ETH and every ERC-20 token use that one address. Paste it into Recipient Address and compare the first and last characters.
2
Enter the INJ amount
Type it in the form at the top. If it is under the pair's minimum, the form shows that minimum and one tap fills it in. The RLUSD estimate under it already has the payout fee taken out.
3
Send INJ to the deposit address
Press Exchange Now. Your order page shows a one-time Injective deposit address: send the amount you entered in one transaction. Send INJ from a wallet that holds it on Injective and also holds enough of the coin the network charges its fee in, usually its own coin. If the order page shows a memo next to the deposit address, add it to your transfer, because a deposit without it cannot be matched to your order.
4
Follow the order until RLUSD arrives
The status moves from waiting to confirming, exchanging, sending and finished. Keep the transaction ID from the order page until the RLUSD is in your wallet.
What the INJ to RLUSD swap costs
Two costs come out of the estimate before you see it: the exchange margin and the Ethereum network fee for your payout. You pay the Injective network fee for your deposit yourself, in the coin the network charges fees in, usually its own coin, and your wallet works it out when you send.
The payout fee is a flat amount per payout, so it takes a larger share of a small swap, and the RLUSD you get per INJ drops near the minimum. The facts table below lists the typical network fees and the minimum with the date they were checked.
INJ to RLUSD at a glance
From live exchange data, refreshed hourly.
Item
You send
You receive
Asset
Injective (Mainnet) (INJ)
Ripple USD (Ethereum) (RLUSD)
Network
Injective
Ethereum
Type
Native coin
ERC-20 token
Contract
-
0x8292bb…6317ed
Memo / tag
Include the memo shown on your order page
Not needed
Network fee (typical, checked Nov 22, 2026)
≈ 0.0003 INJ
≈ 0.1333 RLUSD
Route
Cross-chain: Injective to Ethereum
Rate
Floating, estimate shown before you send
Minimum to send (typical, checked Nov 22, 2026)
0.0488527 INJ
Account / ID
Not needed to start a swap
How long the INJ to RLUSD swap takes
The INJ to RLUSD swap is three waits in a row: the Injective network confirms your deposit, the exchange partner swaps it, and the Ethereum network delivers the payout. The time Injective needs to confirm a deposit depends on the network's design and on how busy it is, and the exchange partner swaps only after the confirmations it requires. In rare cases the partner's compliance check pauses an order, which adds time. The stages in order:
1Deposit sent and seen
Your wallet broadcasts the INJ, and the order page moves from waiting to confirming once the deposit is found.
2Injective confirms the deposit
When the network is busy, a deposit sent with a low fee can wait longer for its first confirmation.
3Exchange and RLUSD payout
The partner swaps the INJ and sends RLUSD. The status reaches sending, then finished, and the payout hash appears on the order page.
4Payout final on Ethereum
Your wallet shows the payout once it is in a block. About 15 minutes later, two epochs on, Ethereum finalizes that block.
Your RLUSD address for the payout
An Ethereum address is 0x followed by 40 hexadecimal characters, 42 in total. Mixed-case letters are a checksum (EIP-55), not a different address.
Copy the address from your wallet's receive screen, not from your transaction history, where a scammer's lookalike address can sit next to yours, and compare the first and last characters after pasting. A payout sent to a wrong address cannot be reversed. Mistakes that cost a payout:
An exchange deposit address meant for RLUSD on another network, such as BNB Smart Chain or Base: the exchange may not credit a payout on Ethereum.
A token contract address copied from Etherscan instead of your own wallet address: tokens sent to a contract that cannot handle them can be lost.
A smart contract wallet such as a Safe, which exists only on networks where it was deployed and can fail to receive ETH from some contracts.
On the sending side, send INJ only on Injective, the network your order page names. INJ sent on another network does not reach the deposit address. INJ exists on more than one network, and each is a separate entry in the coin list. Choose the entry that matches the network your coins are on before you create the order.
The payout shows in your wallet once a block includes it, and you can use it from then on. Ethereum finalizes a block after two epochs of 32 slots, about 15 minutes, and after that only a network attack costing many billions of dollars could change it. You need no ETH to receive the payout, because the sender pays the gas. Moving the RLUSD later costs gas paid in ETH, so keep some ETH at the same address. If the token does not show in your wallet, add it by its contract address.
If the address belongs to an exchange, check that the exchange credits RLUSD on Ethereum at that address and what its minimum deposit is; a deposit below the minimum or on a network it does not support may not be credited. To check the payout yourself, open the payout hash from the order page in an Ethereum explorer such as Etherscan.
If your INJ deposit is slow or stuck
Look up the transaction ID from your wallet in a block explorer for Injective. If the explorer cannot find it, the transfer may never have been broadcast, so check your wallet's history first. If it is listed but not yet confirmed, the network may be busy or the fee may be below what it takes now; your wallet's help pages say whether a pending fee can be raised.
Never send the deposit a second time to speed things up: a second payment is a second deposit. If the order page has not moved on after your deposit confirmed, message @xswap_to on Telegram with the Ref. ID from the order page and your deposit hash.
What others can see of your INJ to RLUSD swap
Your deposit is recorded on Injective for good, and on most networks its amount and both addresses can be read by anyone with a block explorer. The payout, its amount and your 0x address are public on Etherscan, and so is everything that address does later on Ethereum. The exchange partner that processes the swap sees both sides: your deposit and your payout address.
Before you send
Send INJ only on Injective, the network your order page names, because a transfer on another network or to a wrong address cannot be reversed.
Copy your RLUSD address from the wallet's receive screen and compare its start and end after pasting.
Send the amount you entered in one transaction, and let your wallet add its network fee on top.
Bookmark the order page and save its Ref. ID, because the Track Order list is stored only in this browser.
INJ to RLUSD Frequently Asked Questions
How do I swap INJ to RLUSD?
Enter the INJ amount and your RLUSD address in the form at the top, press Exchange Now, and send INJ to the one-time deposit address on your order page. After the Injective network confirms the deposit, the exchange partner sends RLUSD on Ethereum to your address. No account or email is needed.
How much RLUSD do I get for 1 INJ?
The amount table in the rate section shows it for several sizes, as an estimate after fees with the time of the quote. For your own amount, the INJ to RLUSD calculator asks for a live estimate. No figure is written here, because the rate floats.
How long does INJ to RLUSD take?
There is no set time: the Injective network confirms the deposit first, then the exchange partner swaps it and sends the RLUSD payout. The timing section on this page lists each stage, and the order page shows which one you are in.
Is there a minimum amount for INJ to RLUSD?
Yes, every pair has a minimum, and it moves with network conditions. The facts table on this page lists the last checked figure. The swap form warns you when your amount is under the current one. A deposit below it cannot be swapped, and getting those coins back is not assured.
Can I swap Injective to Ripple USD without KYC?
You need no account, and xswap.to asks for no ID. In rare cases the exchange partner's automated anti-money-laundering screening pauses a flagged swap and asks for verification, and the order then shows the status verifying. If that happens, message @xswap_to on Telegram with your transaction ID.
Do I need a memo or tag to swap INJ to RLUSD?
For the deposit, only if the order page shows a memo next to the deposit address: your INJ must then carry it to be matched to your order.
Why is the RLUSD I received different from the estimate?
The rate floats, so the market can move between the estimate and the moment your deposit confirms. A different deposit amount changes the payout too: if your wallet took its network fee out of the amount, less INJ arrived than you entered.
How do I swap RLUSD back to INJ?
Use the RLUSD to INJ page, linked next to the swap form. It works the same way in reverse: paste an Injective address, then send RLUSD to the one-time deposit address.
About these numbers
The calculator and the swap form ask for a live estimate for the amount you type; if one fails to load, try again a few seconds later. The amount table is worked out from the page's latest quote and the network fees in it, so treat it as a guide and use the calculator for your own amount. Fees and the minimum in the facts table are typical figures with their check date.