Swap Solayer (LAYER) to Chainlink (LINK) with no sign-up
Enter the LAYER amount, paste a Polygon PoS address from your own wallet, then send LAYER on Solana to the one-time deposit address on your order page. Once the Solana network has confirmed the deposit, the exchange partner swaps it at the floating rate and sends LINK on Polygon PoS straight to your address.
Swap without creating an account or uploading ID. xswap.to never asks for your seed phrase or private keys, and the exchanged coins go straight to your wallet. In rare cases the exchange partner's compliance check can pause a swap and ask for verification.
The LAYER to LINK rate on this page is an estimate for a real swap after fees, so it reads a little lower than the ratio of the two market prices. It floats with the market until your deposit confirms. Type any amount into the calculator below for a live figure.
LAYER to LINK Calculator
Enter an amount to see about how much you would receive. The estimate uses the live floating rate and already includes the payout network fee.
LAYERSolanaSPL
You get (estimate)
LINKPolygonERC-20
Rate
-
Value in USD
-
Network Fee
-
Live Market SnapshotUpdated Nov 22, 2026 04:23 UTC
1 LINK price
$8.89
How to swap LAYER to LINK
1
Copy your LINK address
Open your wallet with Polygon PoS selected, which wallets may list as Polygon or Polygon Mainnet, and copy your 0x address from its receive screen. Paste it into Recipient Address and compare the first and last characters.
2
Enter the LAYER amount
Type it in the form at the top. If it is under the pair's minimum, the form shows that minimum and one tap fills it in. The LINK estimate under it already has the payout fee taken out.
3
Send LAYER to the deposit address
Press Exchange Now. Your order page shows a one-time Solana deposit address: send the amount you entered in one transaction. Send from any Solana wallet and copy the transaction signature, Solana's name for the transaction ID, so you can look the deposit up later.
4
Follow the order until LINK arrives
The status moves from waiting to confirming, exchanging, sending and finished. Keep the transaction ID from the order page until the LINK is in your wallet.
What the LAYER to LINK swap costs
Two costs come out of the estimate before you see it: the exchange margin and the Polygon PoS network fee for your payout. The Solana network fee is paid in SOL, normally by the sending wallet: a base charge per signature plus any priority fee, charged even if the transaction fails and not tied to the amount. If the deposit address has never held LAYER, your wallet must create its token account in the same transaction, which costs extra SOL as rent that you do not get back.
The payout fee is a flat amount per payout, so it takes a larger share of a small swap, and the LINK you get per LAYER drops near the minimum. The facts table below lists the typical network fees and the minimum with the date they were checked.
LAYER to LINK at a glance
From live exchange data, refreshed hourly.
Item
You send
You receive
Asset
Solayer (LAYER)
Chainlink (Polygon) (LINK)
Network
Solana
Polygon PoS
Type
SPL token
ERC-20 token
Contract
LAYER4xP…wY2Yzc
0x53E0bc…aBad39
Memo / tag
Not needed
Not needed
Network fee (typical, checked Nov 22, 2026)
-
≈ 0.000666 LINK
Route
Cross-chain: Solana to Polygon PoS
Rate
Floating, estimate shown before you send
Minimum to send (typical, checked Nov 22, 2026)
8.4312427 LAYER
Account / ID
Not needed to start a swap
How long the LAYER to LINK swap takes
The LAYER to LINK swap is three waits in a row: the Solana network confirms your deposit, the exchange partner swaps it, and the Polygon PoS network delivers the payout. Solana produces blocks in slots of about 200 milliseconds, and the exchange partner swaps after your deposit has the confirmations it requires. In rare cases the partner's compliance check pauses an order, which adds time. The stages in order:
1Deposit sent and seen
Your wallet broadcasts the LAYER, and the order page moves from waiting to confirming once the deposit is found.
2Solana finalizes the deposit
Once a block includes the deposit, Solana's Alpenglow consensus targets finality in roughly 150 milliseconds. A transaction that misses its blockhash window expires instead of waiting.
3Exchange and LINK payout
The partner swaps the LAYER and sends LINK. The status reaches sending, then finished, and the payout hash appears on the order page.
4Payout final on Polygon PoS
Your wallet shows the payout once a block includes it, and a milestone then finalizes that block for good.
Your LINK address for the payout
Polygon PoS uses the Ethereum address format: 0x followed by 40 hexadecimal characters. Copy the address from your wallet's receive screen, not from your transaction history, where a scammer's lookalike address can sit next to yours, and compare the first and last characters after pasting. A payout sent to a wrong address cannot be reversed. Mistakes that cost a payout:
An exchange deposit address meant for LINK on Ethereum or another network: the 0x address can look the same, but the exchange may not credit a Polygon PoS payout.
A token contract address copied from PolygonScan instead of your own wallet address: tokens sent to a contract that cannot handle them can be lost.
A multisig or other smart contract wallet deployed on another network but not on Polygon PoS, where a payout stays stuck unless the wallet can be recreated there.
This page pays LINK on Polygon PoS. The same coin is listed on other networks too, each as its own entry in the coin list, and the links under this section open the ones open for payouts now.
Pick the entry before you press Exchange Now. The same coin on another network is a different asset to your wallet: balances do not carry over, moving it later takes another transfer, and an address on the wrong network can lose the payout.
The payout shows in your wallet once a block includes it, and a later milestone finalizes that block, after which it cannot be reorganized. You need no POL to receive the payout, because the sender pays the gas. A wallet that still shows MATIC as the network's own coin is showing the same POL balance under the old symbol. Moving the LINK later costs gas paid in POL, so keep some POL at that address. Some tokens have two versions on Polygon PoS with different contracts, such as native USDC and bridged USDC.e, and exchanges may accept only one.
If the address belongs to an exchange, check that the exchange credits LINK on Polygon PoS, not only on Ethereum, and what its minimum deposit is; a deposit on a network it does not support may not be credited. To check the payout yourself, open the payout hash from the order page in a Polygon PoS explorer such as PolygonScan.
If your LAYER deposit is slow or stuck
Look up the transaction signature on a Solana explorer such as Solscan. By default, a Solana transaction expires if no block includes it within 150 blocks of the blockhash it was signed with, about 30 seconds at the current 200-millisecond slots, and after that it can never be processed.
A transaction the explorer marks as failed moved no coins but still cost its fee, and it stays failed. Send again only once the first attempt shows as failed, or has expired without your balance dropping; while it may still land, a second send could become a second deposit. A signed transaction's fee cannot be raised, so when blocks are busy, give the new attempt a higher priority fee, if your wallet lets you set one.
Never send the deposit a second time to speed things up: a second payment is a second deposit. If the order page has not moved on after your deposit confirmed, message @xswap_to on Telegram with the Ref. ID from the order page and your deposit hash.
What others can see of your LAYER to LINK swap
Your deposit is public on Solana: anyone can look up the sending wallet, the deposit address, the amount and the fee in an explorer such as Solscan. The payout, its amount and your 0x address are public on PolygonScan, and so is everything that address does later on Polygon PoS. The exchange partner that processes the swap sees both sides: your deposit and your payout address.
Before you send
Check that the sending wallet holds SOL for the fee besides the LAYER you send, before you create the order.
Copy your LINK address from the wallet's receive screen and compare its start and end after pasting.
Send the amount you entered in one transaction, and let your wallet add its network fee on top.
Bookmark the order page and save its Ref. ID, because the Track Order list is stored only in this browser.
LAYER to LINK Frequently Asked Questions
How do I swap LAYER to LINK?
Enter the LAYER amount and your LINK address in the form at the top, press Exchange Now, and send LAYER on Solana to the one-time deposit address on your order page. After the Solana network confirms the deposit, the exchange partner sends LINK on Polygon PoS to your address. No account or email is needed.
How much LINK do I get for 1 LAYER?
Type 1 into the LAYER to LINK calculator on this page for a live estimate after fees. No figure is written here, because the rate floats and a number in the text would soon be out of date.
How long does LAYER to LINK take?
There is no set time: the Solana network confirms the deposit first, then the exchange partner swaps it and sends the LINK payout. The timing section on this page lists each stage, and the order page shows which one you are in.
Is there a minimum amount for LAYER to LINK?
Yes, every pair has a minimum, and it moves with network conditions. The facts table on this page lists the last checked figure. The swap form warns you when your amount is under the current one. A deposit below it cannot be swapped, and getting those coins back is not assured.
Can I swap Solayer to Chainlink without KYC?
You need no account, and xswap.to asks for no ID. In rare cases the exchange partner's automated anti-money-laundering screening pauses a flagged swap and asks for verification, and the order then shows the status verifying. If that happens, message @xswap_to on Telegram with your transaction ID.
Can I receive LINK on another network?
Yes, through a different entry in the coin list, since this page pays LINK on Polygon PoS. The network section on this page links to the entries open for payouts now. Pick the entry before you press Exchange Now.
Why is the LINK I received different from the estimate?
The rate floats, so the market can move between the estimate and the moment your deposit confirms. A different deposit amount changes the payout too: if your wallet took its network fee out of the amount, less LAYER arrived than you entered.
How do I swap LINK back to LAYER?
Use the LINK to LAYER page, linked next to the swap form. It works the same way in reverse: paste a Solana address, then send LINK to the one-time deposit address.
About these numbers
The calculator and the swap form ask for a live estimate for the amount you type; if one fails to load, try again a few seconds later. Fees and the minimum in the facts table are typical figures with their check date.