Exchange Currencies Track Order Guides Telegram bot

Swap Chainlink (LINK) to Catizen (CATI) with no sign-up

Enter the LINK amount, paste a TON wallet address from your own wallet, then send LINK on Arbitrum One to the one-time deposit address on your order page. Once the Arbitrum One network has confirmed the deposit, the exchange partner swaps it at the floating rate and sends CATI on TON straight to your address.

Swap CATI to LINK instead

Network Fee
-
Deposit Fee
-

Enter an address on the TON (Jetton) network. Coins sent to an address on another network can be lost.

Swap in Telegram

No Account Needed to Start

Swap without creating an account or uploading ID. xswap.to never asks for your seed phrase or private keys, and the exchanged coins go straight to your wallet. In rare cases the exchange partner's compliance check can pause a swap and ask for verification.

Updated Written and checked by the xswap.to team

LINK to CATI exchange rate

The LINK to CATI rate on this page is an estimate for a real swap after fees, so it reads a little lower than the ratio of the two market prices. It floats with the market until your deposit confirms. Type any amount into the calculator below for a live figure.

LINK to CATI Calculator

Enter an amount to see about how much you would receive. The estimate uses the live floating rate and already includes the payout network fee.

LINK Arbitrum ERC-20
You get (estimate)
CATI TON Jetton
0
Rate
-
Network Fee
-
Live Market Snapshot Updated Nov 22, 2026 12:33 UTC
1 LINK price
$8.97

How to swap LINK to CATI

  1. Copy your CATI address

    Open your TON wallet's receive screen and copy the address it shows, which usually starts with UQ, the non-bounceable form wallet apps use for receiving. Paste it into Recipient Address and compare the first and last characters.

  2. Enter the LINK amount

    Type it in the form at the top. If it is under the pair's minimum, the form shows that minimum and one tap fills it in. The CATI estimate under it already has the payout fee taken out.

  3. Send LINK to the deposit address

    Press Exchange Now. Your order page shows a one-time Arbitrum One deposit address: send the amount you entered in one transaction. Send from a wallet switched to Arbitrum One that holds some ETH there for gas, and check the network name on the confirmation screen before you approve.

  4. Follow the order until CATI arrives

    The status moves from waiting to confirming, exchanging, sending and finished. Keep the transaction ID from the order page until the CATI is in your wallet.

What the LINK to CATI swap costs

Two costs come out of the estimate before you see it: the exchange margin and the TON network fee for your payout. You pay the Arbitrum One network fee yourself, and the network charges it in ETH, for ETH and tokens alike. Your wallet shows one fee that covers the work on Arbitrum and a share of posting the data to Ethereum. Sending LINK on Arbitrum One still costs gas, charged in ETH on Arbitrum One, so most wallets need some ETH there as well as the LINK.

The payout fee is a flat amount per payout, so it takes a larger share of a small swap, and the CATI you get per LINK drops near the minimum. The facts table below lists the typical network fees and the minimum with the date they were checked.

LINK to CATI at a glance

From live exchange data, refreshed hourly.

Item You send You receive
Asset Chainlink (Arbitrum One) (LINK) Catizen (CATI)
Network Arbitrum One TON
Type ERC-20 token Jetton token
Contract 0xf97f4d…539FB4 EQD-cvR0…9UAAD7
Memo / tag Not needed Not needed
Network fee (typical, checked Nov 22, 2026) ≈ 0.003132 LINK -
Route Cross-chain: Arbitrum One to TON
Rate Floating, estimate shown before you send
Minimum to send (typical, checked Nov 22, 2026) 0.0068673 LINK
Account / ID Not needed to start a swap

How long the LINK to CATI swap takes

The LINK to CATI swap is three waits in a row: the Arbitrum One network confirms your deposit, the exchange partner swaps it, and the TON network delivers the payout. Arbitrum One's sequencer, which orders transactions, confirms your deposit provisionally once it puts it in a block. The deposit is final when the batch holding it is posted to Ethereum and final there, and the exchange partner swaps after the confirmations it requires. In rare cases the partner's compliance check pauses an order, which adds time. The stages in order:

  1. Deposit sent and seen

    Your wallet broadcasts the LINK, and the order page moves from waiting to confirming once the deposit is found.

  2. Arbitrum One sequences the deposit

    The sequencer puts it in a block or, if it cannot do so in time, drops it rather than leaving it pending.

  3. Exchange and CATI payout

    The partner swaps the LINK and sends CATI. The status reaches sending, then finished, and the payout hash appears on the order page.

  4. Payout final on TON

    Your wallet lists the CATI under your address once the transfer is in a block, and a masterchain block then makes it final.

Your CATI address for the payout

A TON wallet address is usually shown as 48 characters of letters, digits, hyphens and the underline sign, starting with UQ (non-bounceable, the form meant for wallets) or EQ (bounceable). The raw form is 0: followed by 64 hex characters. All forms point to the same account; for a new, unused wallet, give the UQ form.

Copy the address from your wallet's receive screen, not from your transaction history, where a scammer's lookalike address can sit next to yours, and compare the first and last characters after pasting. A payout sent to a wrong address cannot be reversed. Mistakes that cost a payout:

  • The EQ form of a wallet that has never sent anything: Gram (TON) sent in bounceable form to an undeployed wallet returns to the sender, so give the UQ form.
  • An exchange deposit address that needs a memo, entered without it or for a coin whose listing here has no memo field: the exchange cannot match the payout automatically.
  • A Jetton wallet or Jetton master address copied from an explorer: payouts must go to your regular wallet address, the one your wallet app shows.

Receiving CATI on TON: address and memo

Memo or tagNot used on this network.
Block explorertonviewer.com

More about swapping on TON

Send LINK on the right network

On the sending side, send LINK only on Arbitrum One, the network your order page names. LINK sent on another network does not reach the deposit address. LINK exists on more than one network, and each is a separate entry in the coin list. Choose the entry that matches the network your coins are on before you create the order.

After the CATI arrives

The payout is final once a masterchain block includes it, which normally takes about a second, and your wallet lists it under the address you pasted. If nothing shows, compare the wallet app's address with the one on the order page: one recovery phrase can control several TON wallets, one per wallet version, each with its own address and balance. Your CATI sits in a separate Jetton wallet contract linked to your address, which the incoming transfer opens if needed with Gram (TON) the sender attaches; moving it later takes Gram (TON) for fees, unless your wallet app offers gasless transfers.

If the address belongs to an exchange, check that the exchange gives it for CATI deposits on the TON network, note its minimum deposit, and enter the memo it shows; when the form has no memo field for CATI, receive to your own wallet instead. To check the payout yourself, open the payout hash from the order page in a TON explorer such as Tonviewer.

If your LINK deposit is slow or stuck

Look up the transaction hash on Arbiscan first. If Arbiscan has no record of it, check which network your wallet sent on: the same 0x address exists on Ethereum, Arbitrum Nova and other EVM networks, but the order waits for a transfer on Arbitrum One only. Most wallets work on one network at a time, so the wrong one is easy to pick.

Arbitrum One keeps no long pending pool: the sequencer holds a transaction for seconds, then puts it in a block or drops it, for example when the base fee has risen above the maximum fee your wallet set. A dropped transaction never runs, so nothing leaves your wallet. If the wallet still lists it as pending, its speed up option, where offered, sends it again with the same nonce, so only one copy can go through; ask support before you make a new transfer.

Never send the deposit a second time to speed things up: a second payment is a second deposit. If the order page has not moved on after your deposit confirmed, message @xswap_to on Telegram with the Ref. ID from the order page and your deposit hash.

What others can see of your LINK to CATI swap

Your deposit is public: the amount, your sending address and the deposit address show on Arbiscan, and the transaction data is also posted to Ethereum. The payout, its amount and your receiving address are visible to anyone in a TON explorer, together with your wallet's balance and token holdings. The exchange partner that processes the swap sees both sides: your deposit and your payout address.

Before you send

  • Switch your wallet to Arbitrum One and keep some ETH there for gas before you send, even when the deposit is a token.
  • Copy your CATI address from the wallet's receive screen and compare its start and end after pasting.
  • Send the amount you entered in one transaction, and let your wallet add its network fee on top.
  • Bookmark the order page and save its Ref. ID, because the Track Order list is stored only in this browser.

LINK to CATI Frequently Asked Questions

How do I swap LINK to CATI?

Enter the LINK amount and your CATI address in the form at the top, press Exchange Now, and send LINK on Arbitrum One to the one-time deposit address on your order page. After the Arbitrum One network confirms the deposit, the exchange partner sends CATI on TON to your address. No account or email is needed.

How much CATI do I get for 1 LINK?

Type 1 into the LINK to CATI calculator on this page for a live estimate after fees. No figure is written here, because the rate floats and a number in the text would soon be out of date.

How long does LINK to CATI take?

There is no set time: the Arbitrum One network confirms the deposit first, then the exchange partner swaps it and sends the CATI payout. The timing section on this page lists each stage, and the order page shows which one you are in.

Is there a minimum amount for LINK to CATI?

Yes, every pair has a minimum, and it moves with network conditions. The facts table on this page lists the last checked figure. The swap form warns you when your amount is under the current one. A deposit below it cannot be swapped, and getting those coins back is not assured.

Can I swap Chainlink to Catizen without KYC?

You need no account, and xswap.to asks for no ID. In rare cases the exchange partner's automated anti-money-laundering screening pauses a flagged swap and asks for verification, and the order then shows the status verifying. If that happens, message @xswap_to on Telegram with your transaction ID.

Why is the CATI I received different from the estimate?

The rate floats, so the market can move between the estimate and the moment your deposit confirms. A different deposit amount changes the payout too: if your wallet took its network fee out of the amount, less LINK arrived than you entered.

How do I swap CATI back to LINK?

Use the CATI to LINK page, linked next to the swap form. It works the same way in reverse: paste an Arbitrum One address, then send CATI to the one-time deposit address.

About these numbers

The calculator and the swap form ask for a live estimate for the amount you type; if one fails to load, try again a few seconds later. Fees and the minimum in the facts table are typical figures with their check date.

Guides for this swap

Related swaps

Popular swaps