Swap Chainlink (LINK) to Marinade Staked SOL (MSOL) with no sign-up
Enter the LINK amount, paste a Solana wallet address from your own wallet, then send LINK on Arbitrum One to the one-time deposit address on your order page. Once the Arbitrum One network has confirmed the deposit, the exchange partner swaps it at the floating rate and sends MSOL on Solana straight to your address.
Swap without creating an account or uploading ID. xswap.to never asks for your seed phrase or private keys, and the exchanged coins go straight to your wallet. In rare cases the exchange partner's compliance check can pause a swap and ask for verification.
The LINK to MSOL rate on this page is an estimate for a real swap after fees, so it reads a little lower than the ratio of the two market prices. It floats with the market until your deposit confirms.
Type any amount into the calculator below for a live figure. The table under it shows what several LINK amounts come to in MSOL after fees. It is worked out from the page's latest quote and carries that quote's time. The daily table tracks the market rate between the two coins on each recent day, before swap fees, from xswap.to's own price record.
LINK to MSOL Calculator
Enter an amount to see about how much you would receive. The estimate uses the live floating rate and already includes the payout network fee.
LINKArbitrumERC-20
You get (estimate)
MSOLSolanaSPL
Rate
1 LINK ≈ 0.0840581 MSOL
Value in USD
≈ $90.85
Network Fee
0.0017915 MSOL
LINK to MSOL conversion table
Estimates after fees, worked out from one live quote taken at . The rate floats: the calculator and the swap form show the live figure.
Market rate before swap fees, from xswap.to's own daily price record, Nov 16, 2026 to Nov 22, 2026.
Highest0.0854773 MSOL
Lowest0.0820038 MSOL
Change, 6 days−4.06%
0.08547730.0820038Nov 16, 2026Nov 22, 2026
Date
Rate
1 LINK ≈ 0.0820038 MSOL
1 LINK ≈ 0.0834621 MSOL
1 LINK ≈ 0.082635 MSOL
1 LINK ≈ 0.0834668 MSOL
1 LINK ≈ 0.0821788 MSOL
1 LINK ≈ 0.0838219 MSOL
1 LINK ≈ 0.0854773 MSOL
Live Market SnapshotUpdated Nov 22, 2026 10:29 UTC
1 LINK price
$8.98
1 MSOL price
$108.08
1 LINK buys
0.08405809 MSOL
How to swap LINK to MSOL
1
Copy your MSOL address
Open your Solana wallet's receive screen and copy your wallet address, the one address that receives both SOL and every SPL token. Paste it into Recipient Address and compare the first and last characters.
2
Enter the LINK amount
Type it in the form at the top. If it is under the pair's minimum, the form shows that minimum and one tap fills it in. The MSOL estimate under it already has the payout fee taken out.
3
Send LINK to the deposit address
Press Exchange Now. Your order page shows a one-time Arbitrum One deposit address: send the amount you entered in one transaction. Send from a wallet switched to Arbitrum One that holds some ETH there for gas, and check the network name on the confirmation screen before you approve.
4
Follow the order until MSOL arrives
The status moves from waiting to confirming, exchanging, sending and finished. Keep the transaction ID from the order page until the MSOL is in your wallet.
What the LINK to MSOL swap costs
Two costs come out of the estimate before you see it: the exchange margin and the Solana network fee for your payout. You pay the Arbitrum One network fee yourself, and the network charges it in ETH, for ETH and tokens alike. Your wallet shows one fee that covers the work on Arbitrum and a share of posting the data to Ethereum. Sending LINK on Arbitrum One still costs gas, charged in ETH on Arbitrum One, so most wallets need some ETH there as well as the LINK.
The payout fee is a flat amount per payout, so it takes a larger share of a small swap, and the MSOL you get per LINK drops near the minimum. The facts table below lists the typical network fees and the minimum with the date they were checked.
LINK to MSOL at a glance
From live exchange data, refreshed hourly.
Item
You send
You receive
Asset
Chainlink (Arbitrum One) (LINK)
Marinade Staked SOL (MSOL)
Network
Arbitrum One
Solana
Type
ERC-20 token
SPL token
Contract
0xf97f4d…539FB4
mSoLzYCx…cJm7So
Memo / tag
Not needed
Not needed
Network fee (typical, checked Nov 22, 2026)
≈ 0.003132 LINK
≈ 0.001797 MSOL
Route
Cross-chain: Arbitrum One to Solana
Rate
Floating, estimate shown before you send
Minimum to send (typical, checked Nov 22, 2026)
0.0515722 LINK
Account / ID
Not needed to start a swap
How long the LINK to MSOL swap takes
The LINK to MSOL swap is three waits in a row: the Arbitrum One network confirms your deposit, the exchange partner swaps it, and the Solana network delivers the payout. Arbitrum One's sequencer, which orders transactions, confirms your deposit provisionally once it puts it in a block. The deposit is final when the batch holding it is posted to Ethereum and final there, and the exchange partner swaps after the confirmations it requires. In rare cases the partner's compliance check pauses an order, which adds time. The stages in order:
1Deposit sent and seen
Your wallet broadcasts the LINK, and the order page moves from waiting to confirming once the deposit is found.
2Arbitrum One sequences the deposit
The sequencer puts it in a block or, if it cannot do so in time, drops it rather than leaving it pending.
3Exchange and MSOL payout
The partner swaps the LINK and sends MSOL. The status reaches sending, then finished, and the payout hash appears on the order page.
4Payout final on Solana
Once the validators finalize the block holding the payout, it cannot be reversed, and your wallet lists the MSOL under your address.
Your MSOL address for the payout
A Solana address is a base58 string of a 32-byte public key, 32 to 44 characters long, with no 0x prefix. Base58 never uses 0, O, I or l. The same wallet address receives SOL and SPL tokens such as USDT and USDC.
Copy the address from your wallet's receive screen, not from your transaction history, where a scammer's lookalike address can sit next to yours, and compare the first and last characters after pasting. A payout sent to a wrong address cannot be reversed. Mistakes that cost a payout:
A token's mint, token account or program address from an explorer: SOL sent to any of them may be lost for good, and a token payout to a mint fails.
An exchange deposit address that needs a memo: this listing sends no memo, so the exchange may not credit the payout.
On the sending side, send LINK only on Arbitrum One, the network your order page names. LINK sent on another network does not reach the deposit address. LINK exists on more than one network, and each is a separate entry in the coin list. Choose the entry that matches the network your coins are on before you create the order.
The payout is an ordinary Solana transfer to your wallet address. It cannot be reversed once its block is finalized, which Solana's consensus targets within roughly 150 milliseconds, and the coins then sit at that address, whichever wallet app holds its keys. Every later transfer of the coins pays its network fee in SOL, even when you move a token. MSOL arrives in a token account tied to your wallet address; if you have never held MSOL, the payout has to create that account, and your wallet needs no SOL to receive it.
If the address belongs to an exchange, check that it is the exchange's deposit address for MSOL on Solana and what its minimum deposit is; if it asks for a memo, use your own wallet, since this listing sends none. To check the payout yourself, open the payout hash from the order page in a Solana explorer such as Solscan.
If your LINK deposit is slow or stuck
Look up the transaction hash on Arbiscan first. If Arbiscan has no record of it, check which network your wallet sent on: the same 0x address exists on Ethereum, Arbitrum Nova and other EVM networks, but the order waits for a transfer on Arbitrum One only. Most wallets work on one network at a time, so the wrong one is easy to pick.
Arbitrum One keeps no long pending pool: the sequencer holds a transaction for seconds, then puts it in a block or drops it, for example when the base fee has risen above the maximum fee your wallet set. A dropped transaction never runs, so nothing leaves your wallet. If the wallet still lists it as pending, its speed up option, where offered, sends it again with the same nonce, so only one copy can go through; ask support before you make a new transfer.
Never send the deposit a second time to speed things up: a second payment is a second deposit. If the order page has not moved on after your deposit confirmed, message @xswap_to on Telegram with the Ref. ID from the order page and your deposit hash.
What others can see of your LINK to MSOL swap
Your deposit is public: the amount, your sending address and the deposit address show on Arbiscan, and the transaction data is also posted to Ethereum. The payout, its amount and your receiving address are visible to anyone in a Solana explorer, along with the other SOL and token balances of that address. The exchange partner that processes the swap sees both sides: your deposit and your payout address.
Before you send
Switch your wallet to Arbitrum One and keep some ETH there for gas before you send, even when the deposit is a token.
Copy your MSOL address from the wallet's receive screen and compare its start and end after pasting.
Send the amount you entered in one transaction, and let your wallet add its network fee on top.
Bookmark the order page and save its Ref. ID, because the Track Order list is stored only in this browser.
LINK to MSOL Frequently Asked Questions
How do I swap LINK to MSOL?
Enter the LINK amount and your MSOL address in the form at the top, press Exchange Now, and send LINK on Arbitrum One to the one-time deposit address on your order page. After the Arbitrum One network confirms the deposit, the exchange partner sends MSOL on Solana to your address. No account or email is needed.
How much MSOL do I get for 1 LINK?
The amount table in the rate section shows it for several sizes, as an estimate after fees with the time of the quote. For your own amount, the LINK to MSOL calculator asks for a live estimate. No figure is written here, because the rate floats.
How long does LINK to MSOL take?
There is no set time: the Arbitrum One network confirms the deposit first, then the exchange partner swaps it and sends the MSOL payout. The timing section on this page lists each stage, and the order page shows which one you are in.
Is there a minimum amount for LINK to MSOL?
Yes, every pair has a minimum, and it moves with network conditions. The facts table on this page lists the last checked figure. The swap form warns you when your amount is under the current one. A deposit below it cannot be swapped, and getting those coins back is not assured.
Can I swap Chainlink to Marinade Staked SOL without KYC?
You need no account, and xswap.to asks for no ID. In rare cases the exchange partner's automated anti-money-laundering screening pauses a flagged swap and asks for verification, and the order then shows the status verifying. If that happens, message @xswap_to on Telegram with your transaction ID.
Why is the MSOL I received different from the estimate?
The rate floats, so the market can move between the estimate and the moment your deposit confirms. A different deposit amount changes the payout too: if your wallet took its network fee out of the amount, less LINK arrived than you entered.
How do I swap MSOL back to LINK?
Use the MSOL to LINK page, linked next to the swap form. It works the same way in reverse: paste an Arbitrum One address, then send MSOL to the one-time deposit address.
About these numbers
The calculator and the swap form ask for a live estimate for the amount you type; if one fails to load, try again a few seconds later. The amount table is worked out from the page's latest quote and the network fees in it, so treat it as a guide and use the calculator for your own amount. The daily rates come from xswap.to's own price record, one value per day, and show the market rate before swap fees. Fees and the minimum in the facts table are typical figures with their check date.