Exchange Currencies Track Order Guides Telegram bot

Swap Chainlink (LINK) to Hamster Kombat (HMSTR) with no sign-up

Enter the LINK amount, paste a TON wallet address from your own wallet, then send LINK on Polygon PoS to the one-time deposit address on your order page. Once the Polygon PoS network has confirmed the deposit, the exchange partner swaps it at the floating rate and sends HMSTR on TON straight to your address.

Swap HMSTR to LINK instead

Rate
1 LINK ≈ 56,855.3974 HMSTR
Network Fee
-
Deposit Fee
-

Enter an address on the TON (Jetton) network. Coins sent to an address on another network can be lost.

Swap in Telegram

No Account Needed to Start

Swap without creating an account or uploading ID. xswap.to never asks for your seed phrase or private keys, and the exchanged coins go straight to your wallet. In rare cases the exchange partner's compliance check can pause a swap and ask for verification.

Updated Written and checked by the xswap.to team

LINK to HMSTR exchange rate

The LINK to HMSTR rate on this page is an estimate for a real swap after fees, so it reads a little lower than the ratio of the two market prices. It floats with the market until your deposit confirms.

Type any amount into the calculator below for a live figure. The table under it shows what several LINK amounts come to in HMSTR after fees. It is worked out from the page's latest quote and carries that quote's time. The daily table tracks the market rate between the two coins on each recent day, before swap fees, from xswap.to's own price record.

LINK to HMSTR Calculator

Enter an amount to see about how much you would receive. The estimate uses the live floating rate and already includes the payout network fee.

LINK Polygon ERC-20
You get (estimate)
HMSTR TON Jetton
568,553.9740371 HMSTR
Rate
1 LINK ≈ 56,855.4 HMSTR
Value in USD
≈ $86.65
Network Fee
382.5049268 HMSTR

LINK to HMSTR conversion table

Estimates after fees, worked out from one live quote taken at . The rate floats: the calculator and the swap form show the live figure.
You sendYou get (estimate after fees)
10 LINK≈ 568,554 HMSTR
50 LINK≈ 2,844,622 HMSTR
100 LINK≈ 5,689,707 HMSTR
500 LINK≈ 28,450,385 HMSTR
1,000 LINK≈ 56,901,233 HMSTR
5,000 LINK≈ 284,508,015 HMSTR

LINK to HMSTR daily rate

Market rate before swap fees, from xswap.to's own daily price record, Nov 16, 2026 to Nov 22, 2026.

Highest68,972.7 HMSTR
Lowest57,829.5 HMSTR
Change, 6 days−12.82%
68,972.7 57,829.5
Nov 16, 2026Nov 22, 2026
DateRate
1 LINK ≈ 60,127.2 HMSTR
1 LINK ≈ 57,829.5 HMSTR
1 LINK ≈ 63,521.1 HMSTR
1 LINK ≈ 65,345.4 HMSTR
1 LINK ≈ 64,454.2 HMSTR
1 LINK ≈ 64,640.4 HMSTR
1 LINK ≈ 68,972.7 HMSTR
Live Market Snapshot Updated Nov 22, 2026 08:29 UTC
1 LINK price
$8.99
1 HMSTR price
$0.0001524
1 LINK buys
56855.39740371 HMSTR

How to swap LINK to HMSTR

  1. Copy your HMSTR address

    Open your TON wallet's receive screen and copy the address it shows, which usually starts with UQ, the non-bounceable form wallet apps use for receiving. Paste it into Recipient Address and compare the first and last characters.

  2. Enter the LINK amount

    Type it in the form at the top. If it is under the pair's minimum, the form shows that minimum and one tap fills it in. The HMSTR estimate under it already has the payout fee taken out.

  3. Send LINK to the deposit address

    Press Exchange Now. Your order page shows a one-time Polygon PoS deposit address: send the amount you entered in one transaction. Send from a wallet set to Polygon PoS that holds enough POL for gas; some wallets still label that balance MATIC.

  4. Follow the order until HMSTR arrives

    The status moves from waiting to confirming, exchanging, sending and finished. Keep the transaction ID from the order page until the HMSTR is in your wallet.

What the LINK to HMSTR swap costs

Two costs come out of the estimate before you see it: the exchange margin and the TON network fee for your payout. You pay the Polygon PoS gas fee yourself, in POL: the gas the transfer uses times the base fee plus a tip, and most wallets suggest both. A token transfer on Polygon PoS runs the token's contract, so it uses more gas than a plain POL transfer, and that gas is paid in POL.

The payout fee is a flat amount per payout, so it takes a larger share of a small swap, and the HMSTR you get per LINK drops near the minimum. The facts table below lists the typical network fees and the minimum with the date they were checked.

LINK to HMSTR at a glance

From live exchange data, refreshed hourly.

Item You send You receive
Asset Chainlink (Polygon) (LINK) Hamster Kombat (HMSTR)
Network Polygon PoS TON
Type ERC-20 token Jetton token
Contract 0x53E0bc…aBad39 EQAJ8uWd…drPcUo
Memo / tag Not needed Not needed
Network fee (typical, checked Nov 22, 2026) ≈ 0.001443 LINK ≈ 387.9 HMSTR
Route Cross-chain: Polygon PoS to TON
Rate Floating, estimate shown before you send
Minimum to send (typical, checked Nov 22, 2026) 0.0170394 LINK
Account / ID Not needed to start a swap

How long the LINK to HMSTR swap takes

The LINK to HMSTR swap is three waits in a row: the Polygon PoS network confirms your deposit, the exchange partner swaps it, and the TON network delivers the payout. Polygon PoS finalizes blocks with milestones once validators holding two thirds of the stake agree, and a finalized block cannot be reorganized; the exchange partner swaps once your deposit has the confirmations it requires. In rare cases the partner's compliance check pauses an order, which adds time. The stages in order:

  1. Deposit sent and seen

    Your wallet broadcasts the LINK, and the order page moves from waiting to confirming once the deposit is found.

  2. Polygon PoS milestones finalize it

    A deposit whose max fee is below the base fee, or that waits behind an earlier pending transaction, can stay pending until you speed it up.

  3. Exchange and HMSTR payout

    The partner swaps the LINK and sends HMSTR. The status reaches sending, then finished, and the payout hash appears on the order page.

  4. Payout final on TON

    Your wallet lists the HMSTR under your address once the transfer is in a block, and a masterchain block then makes it final.

Your HMSTR address for the payout

A TON wallet address is usually shown as 48 characters of letters, digits, hyphens and the underline sign, starting with UQ (non-bounceable, the form meant for wallets) or EQ (bounceable). The raw form is 0: followed by 64 hex characters. All forms point to the same account; for a new, unused wallet, give the UQ form.

Copy the address from your wallet's receive screen, not from your transaction history, where a scammer's lookalike address can sit next to yours, and compare the first and last characters after pasting. A payout sent to a wrong address cannot be reversed. Mistakes that cost a payout:

  • The EQ form of a wallet that has never sent anything: Gram (TON) sent in bounceable form to an undeployed wallet returns to the sender, so give the UQ form.
  • An exchange deposit address that needs a memo, entered without it or for a coin whose listing here has no memo field: the exchange cannot match the payout automatically.
  • A Jetton wallet or Jetton master address copied from an explorer: payouts must go to your regular wallet address, the one your wallet app shows.

Receiving HMSTR on TON: address and memo

Memo or tagNot used on this network.
Block explorertonviewer.com

More about swapping on TON

Send LINK on the right network

On the sending side, send LINK only on Polygon PoS, the network your order page names. LINK sent on another network does not reach the deposit address. LINK exists on more than one network, and each is a separate entry in the coin list. Choose the entry that matches the network your coins are on before you create the order.

After the HMSTR arrives

The payout is final once a masterchain block includes it, which normally takes about a second, and your wallet lists it under the address you pasted. If nothing shows, compare the wallet app's address with the one on the order page: one recovery phrase can control several TON wallets, one per wallet version, each with its own address and balance. Your HMSTR sits in a separate Jetton wallet contract linked to your address, which the incoming transfer opens if needed with Gram (TON) the sender attaches; moving it later takes Gram (TON) for fees, unless your wallet app offers gasless transfers.

If the address belongs to an exchange, check that the exchange gives it for HMSTR deposits on the TON network, note its minimum deposit, and enter the memo it shows; when the form has no memo field for HMSTR, receive to your own wallet instead. To check the payout yourself, open the payout hash from the order page in a TON explorer such as Tonviewer.

If your LINK deposit is slow or stuck

Look up the transaction hash on PolygonScan. A deposit that stays pending usually has a max fee below the current base fee, which every transaction must pay, or a tip too small to be picked. It can also wait behind an earlier pending transaction from your address with a lower nonce. If your wallet offers speed up, use it on the oldest pending one: the wallet resends the same transaction with the same nonce and a higher fee, so only one of the two can confirm.

Do not press cancel on a deposit, because a cancellation that confirms means nothing reaches the order. The sped-up version has a new hash, so give that one to support. If PolygonScan marks the transaction as failed, the coins stayed in your wallet but the gas was spent, so ask support before you send again. Only the exchange can speed up a withdrawal it sent for you.

Never send the deposit a second time to speed things up: a second payment is a second deposit. If the order page has not moved on after your deposit confirmed, message @xswap_to on Telegram with the Ref. ID from the order page and your deposit hash.

What others can see of your LINK to HMSTR swap

Your deposit is public on Polygon PoS: your sending address, the deposit address, the amount and the fee show on PolygonScan, and they stay there. The payout, its amount and your receiving address are visible to anyone in a TON explorer, together with your wallet's balance and token holdings. The exchange partner that processes the swap sees both sides: your deposit and your payout address.

Before you send

  • Keep some POL on Polygon PoS for gas and check which network your wallet is on, since POL also exists as a token on Ethereum.
  • Copy your HMSTR address from the wallet's receive screen and compare its start and end after pasting.
  • Send the amount you entered in one transaction, and let your wallet add its network fee on top.
  • Bookmark the order page and save its Ref. ID, because the Track Order list is stored only in this browser.

LINK to HMSTR Frequently Asked Questions

How do I swap LINK to HMSTR?

Enter the LINK amount and your HMSTR address in the form at the top, press Exchange Now, and send LINK on Polygon PoS to the one-time deposit address on your order page. After the Polygon PoS network confirms the deposit, the exchange partner sends HMSTR on TON to your address. No account or email is needed.

How much HMSTR do I get for 1 LINK?

The amount table in the rate section shows it for several sizes, as an estimate after fees with the time of the quote. For your own amount, the LINK to HMSTR calculator asks for a live estimate. No figure is written here, because the rate floats.

How long does LINK to HMSTR take?

There is no set time: the Polygon PoS network confirms the deposit first, then the exchange partner swaps it and sends the HMSTR payout. The timing section on this page lists each stage, and the order page shows which one you are in.

Is there a minimum amount for LINK to HMSTR?

Yes, every pair has a minimum, and it moves with network conditions. The facts table on this page lists the last checked figure. The swap form warns you when your amount is under the current one. A deposit below it cannot be swapped, and getting those coins back is not assured.

Can I swap Chainlink to Hamster Kombat without KYC?

You need no account, and xswap.to asks for no ID. In rare cases the exchange partner's automated anti-money-laundering screening pauses a flagged swap and asks for verification, and the order then shows the status verifying. If that happens, message @xswap_to on Telegram with your transaction ID.

Why is the HMSTR I received different from the estimate?

The rate floats, so the market can move between the estimate and the moment your deposit confirms. A different deposit amount changes the payout too: if your wallet took its network fee out of the amount, less LINK arrived than you entered.

How do I swap HMSTR back to LINK?

Use the HMSTR to LINK page, linked next to the swap form. It works the same way in reverse: paste a Polygon PoS address, then send HMSTR to the one-time deposit address.

About these numbers

The calculator and the swap form ask for a live estimate for the amount you type; if one fails to load, try again a few seconds later. The amount table is worked out from the page's latest quote and the network fees in it, so treat it as a guide and use the calculator for your own amount. The daily rates come from xswap.to's own price record, one value per day, and show the market rate before swap fees. Fees and the minimum in the facts table are typical figures with their check date.

Guides for this swap

Related swaps

Popular swaps