Swap Notcoin (NOT) to Uniswap (UNI) with no sign-up
Enter the NOT amount, paste your 0x address on Arbitrum One from your own wallet, then send NOT on TON to the one-time deposit address on your order page. Once the TON network has confirmed the deposit, the exchange partner swaps it at the floating rate and sends UNI on Arbitrum One straight to your address.
Swap without creating an account or uploading ID. xswap.to never asks for your seed phrase or private keys, and the exchanged coins go straight to your wallet. In rare cases the exchange partner's compliance check can pause a swap and ask for verification.
The NOT to UNI rate on this page is an estimate for a real swap after fees, so it reads a little lower than the ratio of the two market prices. It floats with the market until your deposit confirms.
Type any amount into the calculator below for a live figure. The table under it shows what several NOT amounts come to in UNI after fees. It is worked out from the page's latest quote and carries that quote's time. The daily table tracks the market rate between the two coins on each recent day, before swap fees, from xswap.to's own price record.
NOT to UNI Calculator
Enter an amount to see about how much you would receive. The estimate uses the live floating rate and already includes the payout network fee.
NOTTONJetton
You get (estimate)
UNIArbitrumERC-20
Rate
1 NOT ≈ 0.0000595666 UNI
Value in USD
≈ $87.07
Network Fee
0.0058113 UNI
NOT to UNI conversion table
Estimates after fees, worked out from one live quote taken at . The rate floats: the calculator and the swap form show the live figure.
Market rate before swap fees, from xswap.to's own daily price record, Nov 16, 2026 to Nov 22, 2026.
Highest0.0000647916 UNI
Lowest0.0000586293 UNI
Change, 6 days+0.81%
0.00006479160.0000586293Nov 16, 2026Nov 22, 2026
Date
Rate
1 NOT ≈ 0.0000591013 UNI
1 NOT ≈ 0.0000647916 UNI
1 NOT ≈ 0.0000620022 UNI
1 NOT ≈ 0.0000601369 UNI
1 NOT ≈ 0.0000589173 UNI
1 NOT ≈ 0.0000592877 UNI
1 NOT ≈ 0.0000586293 UNI
Live Market SnapshotUpdated Nov 22, 2026 21:28 UTC
1 NOT price
$0.00029651
1 UNI price
$4.87
1 NOT buys
0.00005957 UNI
How to swap NOT to UNI
1
Copy your UNI address
Open your wallet with Arbitrum One selected as the network and copy the 0x address from its receive screen. Paste it into Recipient Address and compare the first and last characters.
2
Enter the NOT amount
Type it in the form at the top. If it is under the pair's minimum, the form shows that minimum and one tap fills it in. The UNI estimate under it already has the payout fee taken out.
3
Send NOT to the deposit address
Press Exchange Now. Your order page shows a one-time TON deposit address: send the amount you entered in one transaction. Send from any TON wallet; if the order page shows a memo, use one that has a Comment field and enter the memo there.
4
Follow the order until UNI arrives
The status moves from waiting to confirming, exchanging, sending and finished. Keep the transaction ID from the order page until the UNI is in your wallet.
What the NOT to UNI swap costs
Two costs come out of the estimate before you see it: the exchange margin and the Arbitrum One network fee for your payout. The fee for your TON deposit is paid in Gram (TON), by your wallet or, in apps with gasless transfers, by a relay service; validators set fee levels in the network configuration, so there is no higher rate to choose. A Jetton transfer such as NOT also attaches Gram (TON) to pay the token contracts, including opening the receiver's Jetton wallet if it has none; the unused part normally comes back to you.
The payout fee is a flat amount per payout, so it takes a larger share of a small swap, and the UNI you get per NOT drops near the minimum. The facts table below lists the typical network fees and the minimum with the date they were checked.
NOT to UNI at a glance
From live exchange data, refreshed hourly.
Item
You send
You receive
Asset
Notcoin (NOT)
Uniswap (Arbitrum One) (UNI)
Network
TON
Arbitrum One
Type
Jetton token
ERC-20 token
Contract
EQAvlWFD…M__NOT
0xFa7F89…f1F7f0
Memo / tag
Include the memo shown on your order page
Not needed
Network fee (typical, checked Nov 22, 2026)
≈ 235.2 NOT
≈ 0.005697 UNI
Route
Cross-chain: TON to Arbitrum One
Rate
Floating, estimate shown before you send
Minimum to send (typical, checked Nov 22, 2026)
731.7663653 NOT
Account / ID
Not needed to start a swap
How long the NOT to UNI swap takes
The NOT to UNI swap is three waits in a row: the TON network confirms your deposit, the exchange partner swaps it, and the Arbitrum One network delivers the payout. TON's masterchain produces a block about every 400 milliseconds, and the exchange partner swaps after your deposit has the confirmations it requires. In rare cases the partner's compliance check pauses an order, which adds time. The stages in order:
1Deposit sent and seen
Your wallet broadcasts the NOT, and the order page moves from waiting to confirming once the deposit is found.
2Masterchain block makes it final
A TON transaction cannot be reversed once a masterchain block includes it, which takes about a second when the network runs normally.
3Exchange and UNI payout
The partner swaps the NOT and sends UNI. The status reaches sending, then finished, and the payout hash appears on the order page.
4Payout lands on Arbitrum One
Your wallet lists it once an Arbitrum One block includes the transaction, as long as the wallet is set to Arbitrum One.
Your UNI address for the payout
Arbitrum One uses the Ethereum address format: 0x followed by 40 hexadecimal characters, the same address your wallet shows on Ethereum. Copy the address from your wallet's receive screen, not from your transaction history, where a scammer's lookalike address can sit next to yours, and compare the first and last characters after pasting. A payout sent to a wrong address cannot be reversed. Mistakes that cost a payout:
An exchange deposit address meant for Ethereum mainnet or Arbitrum Nova: the payout is sent on Arbitrum One, a separate chain.
An address at a wallet or exchange that does not support Arbitrum One: Arbitrum's FAQ says its team cannot recover such funds; only that wallet or exchange might.
A smart contract wallet address, such as a multisig, that exists on another network but not on Arbitrum One: getting a payout back then depends on deploying that wallet there.
A token contract address copied from Arbiscan instead of your own wallet address: tokens sent to a contract that cannot handle them can be stuck for good.
This page pays UNI on Arbitrum One. The same coin is listed on other networks too, each as its own entry in the coin list, and the links under this section open the ones open for payouts now.
Pick the entry before you press Exchange Now. The same coin on another network is a different asset to your wallet: balances do not carry over, moving it later takes another transfer, and an address on the wrong network can lose the payout.
The payout is an Arbitrum One transaction, not an Ethereum mainnet one, so a wallet set to Ethereum shows nothing of it; switch yours to Arbitrum One. The coins can be moved again once the transaction is in a block, and the transfer is final when its batch is final on Ethereum.
Moving the payout to Ethereum mainnet later takes a bridge. Through the official Arbitrum bridge, a withdrawal takes at least seven days because of the challenge period, and you then claim it on Ethereum with a transaction that needs ETH on Ethereum for gas. Your wallet may list the UNI only after you add the token, and moving it later costs gas in ETH on Arbitrum One, so keep some ETH there.
If the address belongs to an exchange, check that it accepts this coin on Arbitrum One and what its minimum deposit is; for a token, it must support the same contract. Arbitrum tells exchanges to credit deposits only once they are final on Ethereum. To check the payout yourself, open the payout hash from the order page in an Arbitrum One explorer such as Arbiscan.
If your NOT deposit is slow or stuck
A TON transfer runs as a chain of transactions, so success on your wallet's side does not prove the deposit arrived. Open your wallet's transaction in an explorer such as Tonviewer and follow it to the deposit address: a Jetton transfer with too little Gram (TON) attached can fail on the way, and a failed transfer may bounce back to you, minus fees.
If the transfer reached the deposit address but the order still says waiting, check that it carried the memo, if the order page showed one. If your wallet reports the transfer as expired or failed and the explorer shows nothing leaving your wallet, no coins were sent, and the wallet can sign a new transfer.
Never send the deposit a second time to speed things up: a second payment is a second deposit. If the order page has not moved on after your deposit confirmed, message @xswap_to on Telegram with the Ref. ID from the order page and your deposit hash.
What others can see of your NOT to UNI swap
Your deposit is public on TON: the sending wallet, the deposit address, the amount and any plain text comment, the memo included, can be read by anyone in an explorer. The payout, its amount and your receiving address are public on Arbiscan, where anyone who knows the address can see its whole history on Arbitrum One. The exchange partner that processes the swap sees both sides: your deposit and your payout address.
Before you send
Leave some Gram (TON) in the wallet after the amount you send, because every TON transfer, Jetton transfers included, pays its fees in Gram (TON).
Copy your UNI address from the wallet's receive screen and compare its start and end after pasting.
If the order page shows a memo with the deposit address, add it when you send NOT, or the deposit cannot be matched.
Send the amount you entered in one transaction, and let your wallet add its network fee on top.
Bookmark the order page and save its Ref. ID, because the Track Order list is stored only in this browser.
NOT to UNI Frequently Asked Questions
How do I swap NOT to UNI?
Enter the NOT amount and your UNI address in the form at the top, press Exchange Now, and send NOT on TON to the one-time deposit address on your order page. After the TON network confirms the deposit, the exchange partner sends UNI on Arbitrum One to your address. No account or email is needed.
How much UNI do I get for 1 NOT?
The amount table in the rate section shows it for several sizes, as an estimate after fees with the time of the quote. For your own amount, the NOT to UNI calculator asks for a live estimate. No figure is written here, because the rate floats.
How long does NOT to UNI take?
There is no set time: the TON network confirms the deposit first, then the exchange partner swaps it and sends the UNI payout. The timing section on this page lists each stage, and the order page shows which one you are in.
Is there a minimum amount for NOT to UNI?
Yes, every pair has a minimum, and it moves with network conditions. The facts table on this page lists the last checked figure. The swap form warns you when your amount is under the current one. A deposit below it cannot be swapped, and getting those coins back is not assured.
Can I swap Notcoin to Uniswap without KYC?
You need no account, and xswap.to asks for no ID. In rare cases the exchange partner's automated anti-money-laundering screening pauses a flagged swap and asks for verification, and the order then shows the status verifying. If that happens, message @xswap_to on Telegram with your transaction ID.
Do I need a memo or tag to swap NOT to UNI?
For the deposit, only if the order page shows a memo next to the deposit address: your NOT must then carry it to be matched to your order.
Can I receive UNI on another network?
Yes, through a different entry in the coin list, since this page pays UNI on Arbitrum One. The network section on this page links to the entries open for payouts now. Pick the entry before you press Exchange Now.
Why is the UNI I received different from the estimate?
The rate floats, so the market can move between the estimate and the moment your deposit confirms. A different deposit amount changes the payout too: if your wallet took its network fee out of the amount, less NOT arrived than you entered.
How do I swap UNI back to NOT?
Use the UNI to NOT page, linked next to the swap form. It works the same way in reverse: paste a TON address, then send UNI to the one-time deposit address.
About these numbers
The calculator and the swap form ask for a live estimate for the amount you type; if one fails to load, try again a few seconds later. The amount table is worked out from the page's latest quote and the network fees in it, so treat it as a guide and use the calculator for your own amount. The daily rates come from xswap.to's own price record, one value per day, and show the market rate before swap fees. Fees and the minimum in the facts table are typical figures with their check date.