Exchange Currencies Track Order Guides Telegram bot

Swap Ripple USD (RLUSD) to Destra Network (DSYNC) with no sign-up

Enter the RLUSD amount, paste an Ethereum address from your own wallet, then send RLUSD on Ethereum to the one-time deposit address on your order page. Once the Ethereum network has confirmed the deposit, the exchange partner swaps it at the floating rate and sends DSYNC on Ethereum straight to your address.

Swap DSYNC to RLUSD instead

Rate
1 RLUSD ≈ 214.2816 DSYNC
Network Fee
-
Deposit Fee
-

Enter an address on the Ethereum (ERC-20) network. Coins sent to an address on another network can be lost.

Swap in Telegram

No Account Needed to Start

Swap without creating an account or uploading ID. xswap.to never asks for your seed phrase or private keys, and the exchanged coins go straight to your wallet. In rare cases the exchange partner's compliance check can pause a swap and ask for verification.

Updated Written and checked by the xswap.to team

RLUSD to DSYNC exchange rate

The RLUSD to DSYNC rate on this page is an estimate for a real swap after fees, so it reads a little lower than the ratio of the two market prices. It floats with the market until your deposit confirms.

Type any amount into the calculator below for a live figure. The table under it shows what several RLUSD amounts come to in DSYNC after fees. It is worked out from the page's latest quote and carries that quote's time.

RLUSD to DSYNC Calculator

Enter an amount to see about how much you would receive. The estimate uses the live floating rate and already includes the payout network fee.

RLUSD Ethereum ERC-20
You get (estimate)
DSYNC Ethereum ERC-20
21,428.1572745 DSYNC
Rate
1 RLUSD ≈ 214.282 DSYNC
Value in USD
≈ $100.90
Network Fee
22.5369839 DSYNC

RLUSD to DSYNC conversion table

Estimates after fees, worked out from one live quote taken at . The rate floats: the calculator and the swap form show the live figure.
You sendYou get (estimate after fees)
100 RLUSD≈ 21,428.2 DSYNC
500 RLUSD≈ 107,515 DSYNC
1,000 RLUSD≈ 215,124 DSYNC
5,000 RLUSD≈ 1,075,995 DSYNC
10,000 RLUSD≈ 2,152,084 DSYNC
Live Market Snapshot Updated Nov 22, 2026 04:48 UTC
1 RLUSD price
$1.03
1 DSYNC price
$0.00470882
1 RLUSD buys
214.28157275 DSYNC

How to swap RLUSD to DSYNC

  1. Copy your DSYNC address

    Open your wallet with Ethereum mainnet selected and copy your 0x address from its receive screen; ETH and every ERC-20 token use that one address. Paste it into Recipient Address and compare the first and last characters.

  2. Enter the RLUSD amount

    Type it in the form at the top. If it is under the pair's minimum, the form shows that minimum and one tap fills it in. The DSYNC estimate under it already has the payout fee taken out.

  3. Send RLUSD to the deposit address

    Press Exchange Now. Your order page shows a one-time Ethereum deposit address: send the amount you entered in one transaction. Send from a wallet set to Ethereum mainnet that holds enough ETH for gas, and keep the max fee it suggests.

  4. Follow the order until DSYNC arrives

    The status moves from waiting to confirming, exchanging, sending and finished. Keep the transaction ID from the order page until the DSYNC is in your wallet.

What the RLUSD to DSYNC swap costs

Two costs come out of the estimate before you see it: the exchange margin and the Ethereum network fee for your payout. You pay the Ethereum gas fee yourself, in ETH: the gas the transfer uses times the base fee plus a priority tip, and most wallets suggest both. An ERC-20 transfer runs the token's contract, so it uses more gas than a plain ETH transfer, and that gas is paid in ETH.

The payout fee is a flat amount per payout, so it takes a larger share of a small swap, and the DSYNC you get per RLUSD drops near the minimum. The facts table below lists the typical network fees and the minimum with the date they were checked.

RLUSD to DSYNC at a glance

From live exchange data, refreshed hourly.

Item You send You receive
Asset Ripple USD (Ethereum) (RLUSD) Destra Network (DSYNC)
Network Ethereum Ethereum
Type ERC-20 token ERC-20 token
Contract 0x8292bb…6317ed 0xf94e7d…3f91CC
Memo / tag Not needed Not needed
Network fee (typical, checked Nov 22, 2026) ≈ 0.3344 RLUSD ≈ 22.5 DSYNC
Route Same network (Ethereum)
Rate Floating, estimate shown before you send
Minimum to send (typical, checked Nov 22, 2026) 0.9418079 RLUSD
Account / ID Not needed to start a swap

How long the RLUSD to DSYNC swap takes

The RLUSD to DSYNC swap is three waits in a row, all on Ethereum: the network confirms your deposit, the exchange partner swaps it, and a second Ethereum transaction delivers the payout. Ethereum runs in 12-second slots, each with one validator chosen to propose a block, though a slot is sometimes empty; the exchange partner swaps once your deposit has the confirmations it requires. In rare cases the partner's compliance check pauses an order, which adds time. The stages in order:

  1. Deposit sent and seen

    Your wallet broadcasts the RLUSD, and the order page moves from waiting to confirming once the deposit is found.

  2. Ethereum includes it in a block

    Each 12-second slot can add a block. A deposit whose max fee is below the base fee can wait until the base fee falls or you speed it up.

  3. Exchange and DSYNC payout

    The partner swaps the RLUSD and sends DSYNC. The status reaches sending, then finished, and the payout hash appears on the order page.

  4. Payout final on Ethereum

    Your wallet shows the payout once it is in a block. About 15 minutes later, two epochs on, Ethereum finalizes that block.

Your DSYNC address for the payout

An Ethereum address is 0x followed by 40 hexadecimal characters, 42 in total. Mixed-case letters are a checksum (EIP-55), not a different address.

Copy the address from your wallet's receive screen, not from your transaction history, where a scammer's lookalike address can sit next to yours, and compare the first and last characters after pasting. A payout sent to a wrong address cannot be reversed. Mistakes that cost a payout:

  • An exchange deposit address meant for DSYNC on another network, such as BNB Smart Chain or Base: the exchange may not credit a payout on Ethereum.
  • A token contract address copied from Etherscan instead of your own wallet address: tokens sent to a contract that cannot handle them can be lost.
  • A smart contract wallet such as a Safe, which exists only on networks where it was deployed and can fail to receive ETH from some contracts.

Receiving DSYNC on Ethereum: address and memo

Memo or tagNot used on this network.
Block exploreretherscan.io

More about swapping on Ethereum

After the DSYNC arrives

The payout shows in your wallet once a block includes it, and you can use it from then on. Ethereum finalizes a block after two epochs of 32 slots, about 15 minutes, and after that only a network attack costing many billions of dollars could change it. You need no ETH to receive the payout, because the sender pays the gas. Moving the DSYNC later costs gas paid in ETH, so keep some ETH at the same address. If the token does not show in your wallet, add it by its contract address.

If the address belongs to an exchange, check that the exchange credits DSYNC on Ethereum at that address and what its minimum deposit is; a deposit below the minimum or on a network it does not support may not be credited. To check the payout yourself, open the payout hash from the order page in an Ethereum explorer such as Etherscan.

If your RLUSD deposit is slow or stuck

Look up the transaction hash on Etherscan. If it is still pending, its max fee is probably below the current base fee, which rises after blocks fuller than the target, or its tip is too small for validators to pick it. It can also wait behind an earlier pending transaction from your address with a lower nonce. If your wallet offers speed up, use it on the oldest pending one: the wallet resends the same transaction with the same nonce and a higher fee, so only one of the two can confirm.

Do not press cancel on a deposit, because a cancellation that confirms means nothing reaches the order. The sped-up version has a new hash, so give that one to support. If Etherscan marks the transaction as failed, the coins stayed in your wallet but the gas was spent, so ask support before you send again. A withdrawal from an exchange account can only be sped up by that exchange.

Never send the deposit a second time to speed things up: a second payment is a second deposit. If the order page has not moved on after your deposit confirmed, message @xswap_to on Telegram with the Ref. ID from the order page and your deposit hash.

What others can see of your RLUSD to DSYNC swap

Your deposit is public on Ethereum: your sending address, the deposit address, the amount and the fee show on Etherscan and any other explorer, and they stay there. The payout, its amount and your 0x address are public on Etherscan, and so is everything that address does later on Ethereum. The exchange partner that processes the swap sees both sides: your deposit and your payout address.

Before you send

  • Leave enough ETH in your wallet for gas on top of what you send, because Ethereum rejects a transfer whose fee the balance cannot cover.
  • Copy your DSYNC address from the wallet's receive screen and compare its start and end after pasting.
  • Send the amount you entered in one transaction, and let your wallet add its network fee on top.
  • Bookmark the order page and save its Ref. ID, because the Track Order list is stored only in this browser.

RLUSD to DSYNC Frequently Asked Questions

How do I swap RLUSD to DSYNC?

Enter the RLUSD amount and your DSYNC address in the form at the top, press Exchange Now, and send RLUSD on Ethereum to the one-time deposit address on your order page. After the Ethereum network confirms the deposit, the exchange partner sends DSYNC on Ethereum to your address. No account or email is needed.

How much DSYNC do I get for 1 RLUSD?

The amount table in the rate section shows it for several sizes, as an estimate after fees with the time of the quote. For your own amount, the RLUSD to DSYNC calculator asks for a live estimate. No figure is written here, because the rate floats.

How long does RLUSD to DSYNC take?

There is no set time: the Ethereum network confirms the deposit first, then the exchange partner swaps it and sends the DSYNC payout. The timing section on this page lists each stage, and the order page shows which one you are in.

Is there a minimum amount for RLUSD to DSYNC?

Yes, every pair has a minimum, and it moves with network conditions. The facts table on this page lists the last checked figure. The swap form warns you when your amount is under the current one. A deposit below it cannot be swapped, and getting those coins back is not assured.

Can I swap Ripple USD to Destra Network without KYC?

You need no account, and xswap.to asks for no ID. In rare cases the exchange partner's automated anti-money-laundering screening pauses a flagged swap and asks for verification, and the order then shows the status verifying. If that happens, message @xswap_to on Telegram with your transaction ID.

Why is the DSYNC I received different from the estimate?

The rate floats, so the market can move between the estimate and the moment your deposit confirms. A different deposit amount changes the payout too: if your wallet took its network fee out of the amount, less RLUSD arrived than you entered.

How do I swap DSYNC back to RLUSD?

Use the DSYNC to RLUSD page, linked next to the swap form. It works the same way in reverse: paste an Ethereum address, then send DSYNC to the one-time deposit address.

About these numbers

The calculator and the swap form ask for a live estimate for the amount you type; if one fails to load, try again a few seconds later. The amount table is worked out from the page's latest quote and the network fees in it, so treat it as a guide and use the calculator for your own amount. Fees and the minimum in the facts table are typical figures with their check date.

Guides for this swap

Related swaps

Popular swaps