Exchange Currencies Track Order Guides Telegram bot

Swap Ripple USD (RLUSD) to Klever (KLV) with no sign-up

Enter the RLUSD amount, paste your KLV address from your own wallet, then send RLUSD on Ethereum to the one-time deposit address on your order page. Once the Ethereum network has confirmed the deposit, the exchange partner swaps it at the floating rate and sends KLV straight to your address.

Swap KLV to RLUSD instead

Rate
1 RLUSD ≈ 2,263.3656 KLV
Network Fee
-
Deposit Fee
-

Enter an address on the KLV network. Coins sent to an address on another network can be lost.

Swap in Telegram

No Account Needed to Start

Swap without creating an account or uploading ID. xswap.to never asks for your seed phrase or private keys, and the exchanged coins go straight to your wallet. In rare cases the exchange partner's compliance check can pause a swap and ask for verification.

Updated Written and checked by the xswap.to team

RLUSD to KLV exchange rate

The RLUSD to KLV rate on this page is an estimate for a real swap after fees, so it reads a little lower than the ratio of the two market prices. It floats with the market until your deposit confirms.

Type any amount into the calculator below for a live figure. The table under it shows what several RLUSD amounts come to in KLV after fees. It is worked out from the page's latest quote and carries that quote's time.

RLUSD to KLV Calculator

Enter an amount to see about how much you would receive. The estimate uses the live floating rate and already includes the payout network fee.

RLUSD Ethereum ERC-20
You get (estimate)
KLV KLV
226,336.55552 KLV
Rate
1 RLUSD ≈ 2,263.37 KLV
Value in USD
≈ $101.85
Network Fee
3 KLV

RLUSD to KLV conversion table

Estimates after fees, worked out from one live quote taken at . The rate floats: the calculator and the swap form show the live figure.
You sendYou get (estimate after fees)
100 RLUSD≈ 226,337 KLV
500 RLUSD≈ 1,134,792 KLV
1,000 RLUSD≈ 2,270,361 KLV
5,000 RLUSD≈ 11,354,913 KLV
10,000 RLUSD≈ 22,710,604 KLV
Live Market Snapshot Updated Nov 22, 2026 17:56 UTC
1 RLUSD price
$1.03
1 KLV price
$0.00045001
1 RLUSD buys
2263.3655552 KLV

How to swap RLUSD to KLV

  1. Copy your KLV address

    Open your wallet's receive screen for KLV on KLV and copy the address it shows, after checking that the wallet names the same network. Paste it into Recipient Address and compare the first and last characters.

  2. Enter the RLUSD amount

    Type it in the form at the top. If it is under the pair's minimum, the form shows that minimum and one tap fills it in. The KLV estimate under it already has the payout fee taken out.

  3. Send RLUSD to the deposit address

    Press Exchange Now. Your order page shows a one-time Ethereum deposit address: send the amount you entered in one transaction. Send from a wallet set to Ethereum mainnet that holds enough ETH for gas, and keep the max fee it suggests.

  4. Follow the order until KLV arrives

    The status moves from waiting to confirming, exchanging, sending and finished. Keep the transaction ID from the order page until the KLV is in your wallet.

What the RLUSD to KLV swap costs

Two costs come out of the estimate before you see it: the exchange margin and the KLV network fee for your payout. You pay the Ethereum gas fee yourself, in ETH: the gas the transfer uses times the base fee plus a priority tip, and most wallets suggest both. An ERC-20 transfer runs the token's contract, so it uses more gas than a plain ETH transfer, and that gas is paid in ETH.

The payout fee is a flat amount per payout, so it takes a larger share of a small swap, and the KLV you get per RLUSD drops near the minimum. The facts table below lists the typical network fees and the minimum with the date they were checked.

RLUSD to KLV at a glance

From live exchange data, refreshed hourly.

Item You send You receive
Asset Ripple USD (Ethereum) (RLUSD) Klever (KLV)
Network Ethereum KLV
Type ERC-20 token Native coin
Contract 0x8292bb…6317ed -
Memo / tag Not needed Not needed
Network fee (typical, checked Nov 22, 2026) ≈ 0.3344 RLUSD ≈ 3 KLV
Route Cross-chain: Ethereum to KLV
Rate Floating, estimate shown before you send
Minimum to send (typical, checked Nov 22, 2026) 0.7544857 RLUSD
Account / ID Not needed to start a swap

How long the RLUSD to KLV swap takes

The RLUSD to KLV swap is three waits in a row: the Ethereum network confirms your deposit, the exchange partner swaps it, and the KLV network delivers the payout. Ethereum runs in 12-second slots, each with one validator chosen to propose a block, though a slot is sometimes empty; the exchange partner swaps once your deposit has the confirmations it requires. In rare cases the partner's compliance check pauses an order, which adds time. The stages in order:

  1. Deposit sent and seen

    Your wallet broadcasts the RLUSD, and the order page moves from waiting to confirming once the deposit is found.

  2. Ethereum includes it in a block

    Each 12-second slot can add a block. A deposit whose max fee is below the base fee can wait until the base fee falls or you speed it up.

  3. Exchange and KLV payout

    The partner swaps the RLUSD and sends KLV. The status reaches sending, then finished, and the payout hash appears on the order page.

  4. Payout confirmed on KLV

    Your wallet lists the KLV as received once KLV has confirmed the payout.

Your KLV address for the payout

A KLV receiving address is bech32 and starts with klv1. In our checks the swap form accepted klv1 bech32 addresses. Copy the address from your wallet's receive screen, not from your transaction history, where a scammer's lookalike address can sit next to yours, and compare the first and last characters after pasting. A payout sent to a wrong address cannot be reversed. Mistakes that cost a payout:

  • An address for KLV on another network: the same coin on a different network is a separate asset, and a payout sent there can be lost.
  • An exchange address used without the memo or tag the exchange asks for, which it needs to credit the payout to you.
  • A token contract address copied from an explorer instead of the address of your own wallet.

Receiving KLV on KLV: address and memo

Memo or tagNot used on this network.
Block explorerkleverscan.org

After the KLV arrives

The payout is an ordinary KLV transaction from the exchange partner to your address. Your wallet shows it once it has seen the transaction, often as pending at first, and counts it as received once the network has confirmed it. If nothing shows, check that the wallet is set to KLV and, for a token, that it displays this token.

If the address belongs to an exchange, check that the exchange accepts KLV on KLV, what its minimum deposit is and whether it needs a memo or tag; exchanges credit deposits by their own rules. To check the payout yourself, look up the payout hash from the order page in a KLV block explorer.

If your RLUSD deposit is slow or stuck

Look up the transaction hash on Etherscan. If it is still pending, its max fee is probably below the current base fee, which rises after blocks fuller than the target, or its tip is too small for validators to pick it. It can also wait behind an earlier pending transaction from your address with a lower nonce. If your wallet offers speed up, use it on the oldest pending one: the wallet resends the same transaction with the same nonce and a higher fee, so only one of the two can confirm.

Do not press cancel on a deposit, because a cancellation that confirms means nothing reaches the order. The sped-up version has a new hash, so give that one to support. If Etherscan marks the transaction as failed, the coins stayed in your wallet but the gas was spent, so ask support before you send again. A withdrawal from an exchange account can only be sped up by that exchange.

Never send the deposit a second time to speed things up: a second payment is a second deposit. If the order page has not moved on after your deposit confirmed, message @xswap_to on Telegram with the Ref. ID from the order page and your deposit hash.

What others can see of your RLUSD to KLV swap

Your deposit is public on Ethereum: your sending address, the deposit address, the amount and the fee show on Etherscan and any other explorer, and they stay there. The payout is recorded on KLV too, where its amount and your receiving address are usually visible to anyone with a block explorer. The exchange partner that processes the swap sees both sides: your deposit and your payout address.

Before you send

  • Leave enough ETH in your wallet for gas on top of what you send, because Ethereum rejects a transfer whose fee the balance cannot cover.
  • Copy your KLV address from the wallet's receive screen and compare its start and end after pasting.
  • Send the amount you entered in one transaction, and let your wallet add its network fee on top.
  • Bookmark the order page and save its Ref. ID, because the Track Order list is stored only in this browser.

RLUSD to KLV Frequently Asked Questions

How do I swap RLUSD to KLV?

Enter the RLUSD amount and your KLV address in the form at the top, press Exchange Now, and send RLUSD on Ethereum to the one-time deposit address on your order page. After the Ethereum network confirms the deposit, the exchange partner sends KLV to your address. No account or email is needed.

How much KLV do I get for 1 RLUSD?

The amount table in the rate section shows it for several sizes, as an estimate after fees with the time of the quote. For your own amount, the RLUSD to KLV calculator asks for a live estimate. No figure is written here, because the rate floats.

How long does RLUSD to KLV take?

There is no set time: the Ethereum network confirms the deposit first, then the exchange partner swaps it and sends the KLV payout. The timing section on this page lists each stage, and the order page shows which one you are in.

Is there a minimum amount for RLUSD to KLV?

Yes, every pair has a minimum, and it moves with network conditions. The facts table on this page lists the last checked figure. The swap form warns you when your amount is under the current one. A deposit below it cannot be swapped, and getting those coins back is not assured.

Can I swap Ripple USD to Klever without KYC?

You need no account, and xswap.to asks for no ID. In rare cases the exchange partner's automated anti-money-laundering screening pauses a flagged swap and asks for verification, and the order then shows the status verifying. If that happens, message @xswap_to on Telegram with your transaction ID.

Why is the KLV I received different from the estimate?

The rate floats, so the market can move between the estimate and the moment your deposit confirms. A different deposit amount changes the payout too: if your wallet took its network fee out of the amount, less RLUSD arrived than you entered.

How do I swap KLV back to RLUSD?

Use the KLV to RLUSD page, linked next to the swap form. It works the same way in reverse: paste an Ethereum address, then send KLV to the one-time deposit address.

About these numbers

The calculator and the swap form ask for a live estimate for the amount you type; if one fails to load, try again a few seconds later. The amount table is worked out from the page's latest quote and the network fees in it, so treat it as a guide and use the calculator for your own amount. Fees and the minimum in the facts table are typical figures with their check date.

Guides for this swap

Related swaps

Popular swaps