Exchange Currencies Track Order Guides Telegram bot

Swap Toncoin (TON) to Band (BAND) with no sign-up

Enter the TON amount, paste your BandChain address from your own wallet, then send TON to the one-time deposit address on your order page. Once the TON network has confirmed the deposit, the exchange partner swaps it at the floating rate and sends BAND straight to your address.

Swap BAND to TON instead

Network Fee
-
Deposit Fee
-

Enter an address on the BandChain network. Coins sent to an address on another network can be lost.

This coin requires a memo/tag. Funds sent without it may be lost.

Swap in Telegram

No Account Needed to Start

Swap without creating an account or uploading ID. xswap.to never asks for your seed phrase or private keys, and the exchanged coins go straight to your wallet. In rare cases the exchange partner's compliance check can pause a swap and ask for verification.

Updated Written and checked by the xswap.to team

TON to BAND exchange rate

The TON to BAND rate on this page is an estimate for a real swap after fees, so it reads a little lower than the ratio of the two market prices. It floats with the market until your deposit confirms.

Type any amount into the calculator below for a live figure. The daily table tracks the market rate between the two coins on each recent day, before swap fees, from xswap.to's own price record.

TON to BAND Calculator

Enter an amount to see about how much you would receive. The estimate uses the live floating rate and already includes the payout network fee.

TON TON
You get (estimate)
BAND BandChain
0
Rate
-
Value in USD
-
Network Fee
-

TON to BAND daily rate

Market rate before swap fees, from xswap.to's own daily price record, Nov 16, 2026 to Nov 22, 2026.

Highest6.08456 BAND
Lowest4.29639 BAND
Change, 6 days+6.16%
6.08456 4.29639
Nov 16, 2026Nov 22, 2026
DateRate
1 TON ≈ 4.8249 BAND
1 TON ≈ 4.88511 BAND
1 TON ≈ 4.58713 BAND
1 TON ≈ 5.54176 BAND
1 TON ≈ 4.29639 BAND
1 TON ≈ 6.08456 BAND
1 TON ≈ 4.54494 BAND
Live Market Snapshot Updated Nov 22, 2026 21:29 UTC
1 TON price
$1.02
1 BAND price
$0.2026

How to swap TON to BAND

  1. Copy your BAND address

    Open your wallet's receive screen for BAND on BandChain and copy the address it shows, after checking that the wallet names the same network. Paste it into Recipient Address and compare the first and last characters. If the address comes from an exchange, also enter the memo it shows with the address.

  2. Enter the TON amount

    Type it in the form at the top. If it is under the pair's minimum, the form shows that minimum and one tap fills it in. The BAND estimate under it already has the payout fee taken out.

  3. Send TON to the deposit address

    Press Exchange Now. Your order page shows a one-time TON deposit address: send the amount you entered in one transaction. Send from any TON wallet; if the order page shows a memo, use one that has a Comment field and enter the memo there.

  4. Follow the order until BAND arrives

    The status moves from waiting to confirming, exchanging, sending and finished. Keep the transaction ID from the order page until the BAND is in your wallet.

What the TON to BAND swap costs

Two costs come out of the estimate before you see it: the exchange margin and the BandChain network fee for your payout. The fee for your TON deposit is paid in Gram (TON), by your wallet or, in apps with gasless transfers, by a relay service; validators set fee levels in the network configuration, so there is no higher rate to choose.

The payout fee is a flat amount per payout, so it takes a larger share of a small swap, and the BAND you get per TON drops near the minimum. The facts table below lists the typical network fees and the minimum with the date they were checked.

TON to BAND at a glance

From live exchange data, refreshed hourly.

Item You send You receive
Asset Toncoin (TON) Band (Mainnet) (BAND)
Network TON BandChain
Type Native coin Native coin
Memo / tag Include the memo shown on your order page Required with your address
Network fee (typical, checked Nov 22, 2026) ≈ 0.01 TON -
Route Cross-chain: TON to BandChain
Rate Floating, estimate shown before you send
Minimum to send (typical, checked Nov 22, 2026) 0.105 TON
Account / ID Not needed to start a swap

How long the TON to BAND swap takes

The TON to BAND swap is three waits in a row: the TON network confirms your deposit, the exchange partner swaps it, and the BandChain network delivers the payout. TON's masterchain produces a block about every 400 milliseconds, and the exchange partner swaps after your deposit has the confirmations it requires. In rare cases the partner's compliance check pauses an order, which adds time. The stages in order:

  1. Deposit sent and seen

    Your wallet broadcasts the TON, and the order page moves from waiting to confirming once the deposit is found.

  2. Masterchain block makes it final

    A TON transaction cannot be reversed once a masterchain block includes it, which takes about a second when the network runs normally.

  3. Exchange and BAND payout

    The partner swaps the TON and sends BAND. The status reaches sending, then finished, and the payout hash appears on the order page.

  4. Payout confirmed on BandChain

    Your wallet lists the BAND as received once BandChain has confirmed the payout.

Your BAND address for the payout

A BandChain receiving address is bech32 and starts with band1. The swap form accepted band1 bech32 addresses in our checks. Copy the address from your wallet's receive screen, not from your transaction history, where a scammer's lookalike address can sit next to yours, and compare the first and last characters after pasting. A payout sent to a wrong address cannot be reversed. BAND can also carry a memo. If your address comes from an exchange, enter the memo it gives you, because the exchange uses it to credit your account; a wallet you control usually needs none. Mistakes that cost a payout:

  • An address for BAND on another network: the same coin on a different network is a separate asset, and a payout sent there can be lost.
  • An exchange address used without the memo or tag the exchange asks for, which it needs to credit the payout to you.
  • A token contract address copied from an explorer instead of the address of your own wallet.

Receiving BAND on BandChain: address and memo

Memo or tagNeeded when the receiving wallet asks for one, which exchange accounts usually do. Enter it in the memo field of the form.
Block explorerwww.mintscan.io

Which network your BAND arrives on

This page pays BAND. The same coin is listed on other networks too, each as its own entry in the coin list, and the links under this section open the ones open for payouts now.

Pick the entry before you press Exchange Now. The same coin on another network is a different asset to your wallet: balances do not carry over, moving it later takes another transfer, and an address on the wrong network can lose the payout. On the sending side, send TON only on TON, the network your order page names. TON sent on another network does not reach the deposit address.

After the BAND arrives

The payout is an ordinary BandChain transaction from the exchange partner to your address. Your wallet shows it once it has seen the transaction, often as pending at first, and counts it as received once the network has confirmed it. If nothing shows, check that the wallet is set to BandChain and, for a token, that it displays this token.

If the address belongs to an exchange, check that the exchange accepts BAND on BandChain, what its minimum deposit is and whether it needs a memo or tag; exchanges credit deposits by their own rules. To check the payout yourself, look up the payout hash from the order page in a BandChain block explorer.

If your TON deposit is slow or stuck

A TON transfer runs as a chain of transactions, so success on your wallet's side does not prove the deposit arrived. Open your wallet's transaction in an explorer such as Tonviewer and follow it to the deposit address: a Jetton transfer with too little Gram (TON) attached can fail on the way, and a failed transfer may bounce back to you, minus fees.

If the transfer reached the deposit address but the order still says waiting, check that it carried the memo, if the order page showed one. If your wallet reports the transfer as expired or failed and the explorer shows nothing leaving your wallet, no coins were sent, and the wallet can sign a new transfer.

Never send the deposit a second time to speed things up: a second payment is a second deposit. If the order page has not moved on after your deposit confirmed, message @xswap_to on Telegram with the Ref. ID from the order page and your deposit hash.

What others can see of your TON to BAND swap

Your deposit is public on TON: the sending wallet, the deposit address, the amount and any plain text comment, the memo included, can be read by anyone in an explorer. The payout is recorded on BandChain too, where its amount and your receiving address are usually visible to anyone with a block explorer. The exchange partner that processes the swap sees both sides: your deposit and your payout address.

Before you send

  • Leave some Gram (TON) in the wallet after the amount you send, because every TON transfer, Jetton transfers included, pays its fees in Gram (TON).
  • Copy your BAND address from the wallet's receive screen and compare its start and end after pasting.
  • Enter the memo your exchange gives you for BAND, or the payout cannot be credited to your account.
  • If the order page shows a memo with the deposit address, add it when you send TON, or the deposit cannot be matched.
  • Send the amount you entered in one transaction, and let your wallet add its network fee on top.
  • Bookmark the order page and save its Ref. ID, because the Track Order list is stored only in this browser.

TON to BAND Frequently Asked Questions

How do I swap TON to BAND?

Enter the TON amount and your BAND address in the form at the top, press Exchange Now, and send TON to the one-time deposit address on your order page. After the TON network confirms the deposit, the exchange partner sends BAND to your address. No account or email is needed.

How much BAND do I get for 1 TON?

Type 1 into the TON to BAND calculator on this page for a live estimate after fees. No figure is written here, because the rate floats and a number in the text would soon be out of date.

How long does TON to BAND take?

There is no set time: the TON network confirms the deposit first, then the exchange partner swaps it and sends the BAND payout. The timing section on this page lists each stage, and the order page shows which one you are in.

Is there a minimum amount for TON to BAND?

Yes, every pair has a minimum, and it moves with network conditions. The facts table on this page lists the last checked figure. The swap form warns you when your amount is under the current one. A deposit below it cannot be swapped, and getting those coins back is not assured.

Can I swap Toncoin to Band without KYC?

You need no account, and xswap.to asks for no ID. In rare cases the exchange partner's automated anti-money-laundering screening pauses a flagged swap and asks for verification, and the order then shows the status verifying. If that happens, message @xswap_to on Telegram with your transaction ID.

Do I need a memo or tag to swap TON to BAND?

For the payout, only if your BAND address belongs to an exchange: enter the memo it shows with the address. A wallet you control usually needs none. For the deposit, only if the order page shows a memo next to the deposit address: your TON must then carry it to be matched to your order.

Can I receive BAND on another network?

Yes, through a different entry in the coin list, since this page pays BAND. The network section on this page links to the entries open for payouts now. Pick the entry before you press Exchange Now.

Why is the BAND I received different from the estimate?

The rate floats, so the market can move between the estimate and the moment your deposit confirms. A different deposit amount changes the payout too: if your wallet took its network fee out of the amount, less TON arrived than you entered.

How do I swap BAND back to TON?

Use the BAND to TON page, linked next to the swap form. It works the same way in reverse: paste a TON address, then send BAND to the one-time deposit address.

About these numbers

The calculator and the swap form ask for a live estimate for the amount you type; if one fails to load, try again a few seconds later. The daily rates come from xswap.to's own price record, one value per day, and show the market rate before swap fees. Fees and the minimum in the facts table are typical figures with their check date.

Guides for this swap

Related swaps

Popular swaps