Swap Toncoin (TON) to Bitcoin SV (BSV) with no sign-up
Enter the TON amount, paste a Bitcoin SV address from your own wallet, then send TON to the one-time deposit address on your order page. Once the TON network has confirmed the deposit, the exchange partner swaps it at the floating rate and sends BSV straight to your address.
Swap without creating an account or uploading ID. xswap.to never asks for your seed phrase or private keys, and the exchanged coins go straight to your wallet. In rare cases the exchange partner's compliance check can pause a swap and ask for verification.
The TON to BSV rate on this page is an estimate for a real swap after fees, so it reads a little lower than the ratio of the two market prices. It floats with the market until your deposit confirms.
Type any amount into the calculator below for a live figure. The table under it shows what several TON amounts come to in BSV after fees. It is worked out from the page's latest quote and carries that quote's time. The daily table tracks the market rate between the two coins on each recent day, before swap fees, from xswap.to's own price record.
TON to BSV Calculator
Enter an amount to see about how much you would receive. The estimate uses the live floating rate and already includes the payout network fee.
TONTON
You get (estimate)
BSVBitcoin SV
Rate
1 TON ≈ 0.0678786 BSV
Value in USD
≈ $101.35
Network Fee
0.00001 BSV
TON to BSV conversion table
Estimates after fees, worked out from one live quote taken at . The rate floats: the calculator and the swap form show the live figure.
Market rate before swap fees, from xswap.to's own daily price record, Nov 16, 2026 to Nov 20, 2026.
Highest0.0726716 BSV
Lowest0.0678541 BSV
Change, 4 days−4.17%
Date
Rate
1 TON ≈ 0.0696444 BSV
1 TON ≈ 0.0678541 BSV
1 TON ≈ 0.0717088 BSV
1 TON ≈ 0.0702204 BSV
1 TON ≈ 0.0726716 BSV
Live Market SnapshotUpdated Nov 20, 2026 02:04 UTC
1 TON price
$1.04
1 BSV price
$14.93
1 TON buys
0.06787857 BSV
How to swap TON to BSV
1
Copy your BSV address
Open your Bitcoin SV wallet's receive screen and copy the on-chain address, which starts with 1, not a Paymail name. Paste it into Recipient Address and compare the first and last characters.
2
Enter the TON amount
Type it in the form at the top. If it is under the pair's minimum, the form shows that minimum and one tap fills it in. The BSV estimate under it already has the payout fee taken out.
3
Send TON to the deposit address
Press Exchange Now. Your order page shows a one-time TON deposit address: send the amount you entered in one transaction. Send from any TON wallet; if the order page shows a memo, use one that has a Comment field and enter the memo there.
4
Follow the order until BSV arrives
The status moves from waiting to confirming, exchanging, sending and finished. Keep the transaction ID from the order page until the BSV is in your wallet.
What the TON to BSV swap costs
Two costs come out of the estimate before you see it: the exchange margin and the Bitcoin SV network fee for your payout. The fee for your TON deposit is paid in Gram (TON), by your wallet or, in apps with gasless transfers, by a relay service; validators set fee levels in the network configuration, so there is no higher rate to choose.
The payout fee is a flat amount per payout, so it takes a larger share of a small swap, and the BSV you get per TON drops near the minimum. The facts table below lists the typical network fees and the minimum with the date they were checked.
TON to BSV at a glance
From live exchange data, refreshed hourly.
Item
You send
You receive
Asset
Toncoin (TON)
Bitcoin SV (BSV)
Network
TON
Bitcoin SV
Type
Native coin
Native coin
Memo / tag
Include the memo shown on your order page
Not needed
Network fee (typical, checked Nov 19, 2026)
≈ 0.01 TON
≈ 0.00001 BSV
Route
Cross-chain: TON to Bitcoin SV
Rate
Floating, estimate shown before you send
Minimum to send (typical, checked Nov 20, 2026)
0.105 TON
Account / ID
Not needed to start a swap
How long the TON to BSV swap takes
The TON to BSV swap is three waits in a row: the TON network confirms your deposit, the exchange partner swaps it, and the Bitcoin SV network delivers the payout. TON's masterchain produces a block about every 400 milliseconds, and the exchange partner swaps after your deposit has the confirmations it requires. In rare cases the partner's compliance check pauses an order, which adds time. The stages in order:
1Deposit sent and seen
Your wallet broadcasts the TON, and the order page moves from waiting to confirming once the deposit is found.
2Masterchain block makes it final
A TON transaction cannot be reversed once a masterchain block includes it, which takes about a second when the network runs normally.
3Exchange and BSV payout
The partner swaps the TON and sends BSV. The status reaches sending, then finished, and the payout hash appears on the order page.
4Payout confirmed on Bitcoin SV
Your wallet can list the incoming BSV as unconfirmed until a block includes it; blocks come about ten minutes apart on average.
Your BSV address for the payout
A Bitcoin SV address usually starts with 1. The swap form accepted these legacy base58 addresses in our checks. Use the address your BSV wallet shows, not a Bitcoin (BTC) or Bitcoin Cash address, since all three can look alike.
Copy the address from your wallet's receive screen, not from your transaction history, where a scammer's lookalike address can sit next to yours, and compare the first and last characters after pasting. A payout sent to a wrong address cannot be reversed. Mistakes that cost a payout:
A Paymail name, which looks like an email address: the form needs the Bitcoin SV address itself.
A Bitcoin or Bitcoin Cash address in the old format: it looks the same, and BSV sent there does not show in those wallets.
An exchange address that the exchange gives for BTC or BCH rather than BSV.
On the sending side, send TON only on TON, the network your order page names. TON sent on another network does not reach the deposit address. TON exists on more than one network, and each is a separate entry in the coin list. Choose the entry that matches the network your coins are on before you create the order.
The payout is an ordinary Bitcoin SV transaction. Your wallet can list it as unconfirmed as soon as it is broadcast, and it is confirmed once a block includes it. The network aims for one block every ten minutes on average, and each further block makes the payment harder to reverse.
If the address belongs to an exchange, check that the exchange accepts BSV deposits and that this is its address for the Bitcoin SV network; exchanges credit a deposit only after their own number of confirmations. To check the payout yourself, open the payout hash from the order page in a Bitcoin SV explorer such as WhatsOnChain.
If your TON deposit is slow or stuck
A TON transfer runs as a chain of transactions, so success on your wallet's side does not prove the deposit arrived. Open your wallet's transaction in an explorer such as Tonviewer and follow it to the deposit address: a Jetton transfer with too little Gram (TON) attached can fail on the way, and a failed transfer may bounce back to you, minus fees.
If the transfer reached the deposit address but the order still says waiting, check that it carried the memo, if the order page showed one. If your wallet reports the transfer as expired or failed and the explorer shows nothing leaving your wallet, no coins were sent, and the wallet can sign a new transfer.
Never send the deposit a second time to speed things up: a second payment is a second deposit. If the order page has not moved on after your deposit confirmed, message @xswap_to on Telegram with the Ref. ID from the order page and your deposit hash.
What others can see of your TON to BSV swap
Your deposit is public on TON: the sending wallet, the deposit address, the amount and any plain text comment, the memo included, can be read by anyone in an explorer. The payout, its amount and your receiving address are visible to anyone on a Bitcoin SV explorer, and they stay that way. The exchange partner that processes the swap sees both sides: your deposit and your payout address.
Before you send
Leave some Gram (TON) in the wallet after the amount you send, because every TON transfer, Jetton transfers included, pays its fees in Gram (TON).
Copy your BSV address from the wallet's receive screen and compare its start and end after pasting.
If the order page shows a memo with the deposit address, add it when you send TON, or the deposit cannot be matched.
Send the amount you entered in one transaction, and let your wallet add its network fee on top.
Bookmark the order page and save its Ref. ID, because the Track Order list is stored only in this browser.
TON to BSV Frequently Asked Questions
How do I swap TON to BSV?
Enter the TON amount and your BSV address in the form at the top, press Exchange Now, and send TON to the one-time deposit address on your order page. After the TON network confirms the deposit, the exchange partner sends BSV to your address. No account or email is needed.
How much BSV do I get for 1 TON?
The amount table in the rate section shows it for several sizes, as an estimate after fees with the time of the quote. For your own amount, the TON to BSV calculator asks for a live estimate. No figure is written here, because the rate floats.
How long does TON to BSV take?
There is no set time: the TON network confirms the deposit first, then the exchange partner swaps it and sends the BSV payout. The timing section on this page lists each stage, and the order page shows which one you are in.
Is there a minimum amount for TON to BSV?
Yes, every pair has a minimum, and it moves with network conditions. The facts table on this page lists the last checked figure. The swap form warns you when your amount is under the current one. A deposit below it cannot be swapped, and getting those coins back is not assured.
Can I swap Toncoin to Bitcoin SV without KYC?
You need no account, and xswap.to asks for no ID. In rare cases the exchange partner's automated anti-money-laundering screening pauses a flagged swap and asks for verification, and the order then shows the status verifying. If that happens, message @xswap_to on Telegram with your transaction ID.
Do I need a memo or tag to swap TON to BSV?
For the deposit, only if the order page shows a memo next to the deposit address: your TON must then carry it to be matched to your order.
Why is the BSV I received different from the estimate?
The rate floats, so the market can move between the estimate and the moment your deposit confirms. A different deposit amount changes the payout too: if your wallet took its network fee out of the amount, less TON arrived than you entered.
How do I swap BSV back to TON?
Use the BSV to TON page, linked next to the swap form. It works the same way in reverse: paste a TON address, then send BSV to the one-time deposit address.
About these numbers
The calculator and the swap form ask for a live estimate for the amount you type; if one fails to load, try again a few seconds later. The amount table is worked out from the page's latest quote and the network fees in it, so treat it as a guide and use the calculator for your own amount. The daily rates come from xswap.to's own price record, one value per day, and show the market rate before swap fees. Fees and the minimum in the facts table are typical figures with their check date.