Enter the TON amount, paste a Kaspa address from your own wallet, then send TON to the one-time deposit address on your order page. Once the TON network has confirmed the deposit, the exchange partner swaps it at the floating rate and sends KAS straight to your address.
Swap without creating an account or uploading ID. xswap.to never asks for your seed phrase or private keys, and the exchanged coins go straight to your wallet. In rare cases the exchange partner's compliance check can pause a swap and ask for verification.
The TON to KAS rate on this page is an estimate for a real swap after fees, so it reads a little lower than the ratio of the two market prices. It floats with the market until your deposit confirms.
Type any amount into the calculator below for a live figure. The table under it shows what several TON amounts come to in KAS after fees. It is worked out from the page's latest quote and carries that quote's time. The daily table tracks the market rate between the two coins on each recent day, before swap fees, from xswap.to's own price record.
TON to KAS Calculator
Enter an amount to see about how much you would receive. The estimate uses the live floating rate and already includes the payout network fee.
TONTON
You get (estimate)
KASKaspa
Rate
1 TON ≈ 37.6303 KAS
Value in USD
≈ $101.36
Network Fee
0.0034 KAS
TON to KAS conversion table
Estimates after fees, worked out from one live quote taken at . The rate floats: the calculator and the swap form show the live figure.
Market rate before swap fees, from xswap.to's own daily price record, Nov 11, 2026 to Nov 20, 2026.
Highest40.7087 KAS
Lowest37.6073 KAS
Change, 9 days−6.30%
Date
Rate
1 TON ≈ 38.1455 KAS
1 TON ≈ 37.6073 KAS
1 TON ≈ 39.2469 KAS
1 TON ≈ 38.886 KAS
1 TON ≈ 39.1576 KAS
1 TON ≈ 40.7087 KAS
Live Market SnapshotUpdated Nov 20, 2026 02:04 UTC
1 TON price
$1.04
1 KAS price
$0.0269
1 TON buys
37.63033636 KAS
How to swap TON to KAS
1
Copy your KAS address
Open your Kaspa wallet's receive screen and copy the full address, including kaspa: at the start. Paste it into Recipient Address and compare the first and last characters.
2
Enter the TON amount
Type it in the form at the top. If it is under the pair's minimum, the form shows that minimum and one tap fills it in. The KAS estimate under it already has the payout fee taken out.
3
Send TON to the deposit address
Press Exchange Now. Your order page shows a one-time TON deposit address: send the amount you entered in one transaction. Send from any TON wallet; if the order page shows a memo, use one that has a Comment field and enter the memo there.
4
Follow the order until KAS arrives
The status moves from waiting to confirming, exchanging, sending and finished. Keep the transaction ID from the order page until the KAS is in your wallet.
What the TON to KAS swap costs
Two costs come out of the estimate before you see it: the exchange margin and the Kaspa network fee for your payout. The fee for your TON deposit is paid in Gram (TON), by your wallet or, in apps with gasless transfers, by a relay service; validators set fee levels in the network configuration, so there is no higher rate to choose.
The payout fee is a flat amount per payout, so it takes a larger share of a small swap, and the KAS you get per TON drops near the minimum. The facts table below lists the typical network fees and the minimum with the date they were checked.
TON to KAS at a glance
From live exchange data, refreshed hourly.
Item
You send
You receive
Asset
Toncoin (TON)
Kaspa (KAS)
Network
TON
Kaspa
Type
Native coin
Native coin
Memo / tag
Include the memo shown on your order page
Not needed
Network fee (typical, checked Nov 19, 2026)
≈ 0.01 TON
≈ 0.0034 KAS
Route
Cross-chain: TON to Kaspa
Rate
Floating, estimate shown before you send
Minimum to send (typical, checked Nov 20, 2026)
0.3025723 TON
Account / ID
Not needed to start a swap
How long the TON to KAS swap takes
The TON to KAS swap is three waits in a row: the TON network confirms your deposit, the exchange partner swaps it, and the Kaspa network delivers the payout. TON's masterchain produces a block about every 400 milliseconds, and the exchange partner swaps after your deposit has the confirmations it requires. In rare cases the partner's compliance check pauses an order, which adds time. The stages in order:
1Deposit sent and seen
Your wallet broadcasts the TON, and the order page moves from waiting to confirming once the deposit is found.
2Masterchain block makes it final
A TON transaction cannot be reversed once a masterchain block includes it, which takes about a second when the network runs normally.
3Exchange and KAS payout
The partner swaps the TON and sends KAS. The status reaches sending, then finished, and the payout hash appears on the order page.
4Payout accepted on Kaspa
Wallets on the Rusty Kaspa framework show the payout as pending, then by default as confirmed once the DAA score has risen by 100.
Your KAS address for the payout
A Kaspa address starts with kaspa: and continues in lowercase letters and digits. Wallet addresses usually start with kaspa:q and script (multisig) addresses with kaspa:p; the swap form accepted both in our checks. It rejected the same address without the kaspa: prefix.
Copy the address from your wallet's receive screen, not from your transaction history, where a scammer's lookalike address can sit next to yours, and compare the first and last characters after pasting. A payout sent to a wrong address cannot be reversed. Mistakes that cost a payout:
An 0x address for wrapped KAS on an EVM chain: this listing pays native KAS on the Kaspa network.
A testnet address that starts with kaspatest:, which belongs to a Kaspa test network.
An address from a wallet whose recovery phrase you have not written down.
On the sending side, send TON only on TON, the network your order page names. TON sent on another network does not reach the deposit address. TON exists on more than one network, and each is a separate entry in the coin list. Choose the entry that matches the network your coins are on before you create the order.
The payout is an ordinary Kaspa transaction, and Kaspa targets ten blocks per second. Wallets built on the Rusty Kaspa wallet framework list it as pending at first and, by default, count it as confirmed once the network's DAA score, essentially a block count, is 100 higher than that of the block that accepted the payout.
If the address belongs to an exchange, check that it is the exchange's KAS deposit address on the Kaspa network, not one for a KAS token elsewhere, and what minimum it sets; exchanges credit a deposit only after their own number of confirmations. To check the payout yourself, open the payout hash from the order page in a Kaspa explorer such as explorer.kaspa.org.
If your TON deposit is slow or stuck
A TON transfer runs as a chain of transactions, so success on your wallet's side does not prove the deposit arrived. Open your wallet's transaction in an explorer such as Tonviewer and follow it to the deposit address: a Jetton transfer with too little Gram (TON) attached can fail on the way, and a failed transfer may bounce back to you, minus fees.
If the transfer reached the deposit address but the order still says waiting, check that it carried the memo, if the order page showed one. If your wallet reports the transfer as expired or failed and the explorer shows nothing leaving your wallet, no coins were sent, and the wallet can sign a new transfer.
Never send the deposit a second time to speed things up: a second payment is a second deposit. If the order page has not moved on after your deposit confirmed, message @xswap_to on Telegram with the Ref. ID from the order page and your deposit hash.
What others can see of your TON to KAS swap
Your deposit is public on TON: the sending wallet, the deposit address, the amount and any plain text comment, the memo included, can be read by anyone in an explorer. The payout, its amount and your receiving address are visible to anyone who looks them up on a Kaspa explorer. The exchange partner that processes the swap sees both sides: your deposit and your payout address.
Before you send
Leave some Gram (TON) in the wallet after the amount you send, because every TON transfer, Jetton transfers included, pays its fees in Gram (TON).
Copy your KAS address from the wallet's receive screen and compare its start and end after pasting.
If the order page shows a memo with the deposit address, add it when you send TON, or the deposit cannot be matched.
Send the amount you entered in one transaction, and let your wallet add its network fee on top.
Bookmark the order page and save its Ref. ID, because the Track Order list is stored only in this browser.
TON to KAS Frequently Asked Questions
How do I swap TON to KAS?
Enter the TON amount and your KAS address in the form at the top, press Exchange Now, and send TON to the one-time deposit address on your order page. After the TON network confirms the deposit, the exchange partner sends KAS to your address. No account or email is needed.
How much KAS do I get for 1 TON?
The amount table in the rate section shows it for several sizes, as an estimate after fees with the time of the quote. For your own amount, the TON to KAS calculator asks for a live estimate. No figure is written here, because the rate floats.
How long does TON to KAS take?
There is no set time: the TON network confirms the deposit first, then the exchange partner swaps it and sends the KAS payout. The timing section on this page lists each stage, and the order page shows which one you are in.
Is there a minimum amount for TON to KAS?
Yes, every pair has a minimum, and it moves with network conditions. The facts table on this page lists the last checked figure. The swap form warns you when your amount is under the current one. A deposit below it cannot be swapped, and getting those coins back is not assured.
Can I swap Toncoin to Kaspa without KYC?
You need no account, and xswap.to asks for no ID. In rare cases the exchange partner's automated anti-money-laundering screening pauses a flagged swap and asks for verification, and the order then shows the status verifying. If that happens, message @xswap_to on Telegram with your transaction ID.
Do I need a memo or tag to swap TON to KAS?
For the deposit, only if the order page shows a memo next to the deposit address: your TON must then carry it to be matched to your order.
Why is the KAS I received different from the estimate?
The rate floats, so the market can move between the estimate and the moment your deposit confirms. A different deposit amount changes the payout too: if your wallet took its network fee out of the amount, less TON arrived than you entered.
How do I swap KAS back to TON?
Use the KAS to TON page, linked next to the swap form. It works the same way in reverse: paste a TON address, then send KAS to the one-time deposit address.
About these numbers
The calculator and the swap form ask for a live estimate for the amount you type; if one fails to load, try again a few seconds later. The amount table is worked out from the page's latest quote and the network fees in it, so treat it as a guide and use the calculator for your own amount. The daily rates come from xswap.to's own price record, one value per day, and show the market rate before swap fees. Fees and the minimum in the facts table are typical figures with their check date.