Exchange Currencies Track Order Guides Telegram bot

Swap Uniswap (UNI) to Hamster Kombat (HMSTR) with no sign-up

Enter the UNI amount, paste a TON wallet address from your own wallet, then send UNI on Ethereum to the one-time deposit address on your order page. Once the Ethereum network has confirmed the deposit, the exchange partner swaps it at the floating rate and sends HMSTR on TON straight to your address.

Swap HMSTR to UNI instead

Rate
1 UNI ≈ 31,256.307 HMSTR
Network Fee
-
Deposit Fee
-

Enter an address on the TON (Jetton) network. Coins sent to an address on another network can be lost.

Swap in Telegram

No Account Needed to Start

Swap without creating an account or uploading ID. xswap.to never asks for your seed phrase or private keys, and the exchanged coins go straight to your wallet. In rare cases the exchange partner's compliance check can pause a swap and ask for verification.

Updated Written and checked by the xswap.to team

UNI to HMSTR exchange rate

The UNI to HMSTR rate on this page is an estimate for a real swap after fees, so it reads a little lower than the ratio of the two market prices. It floats with the market until your deposit confirms.

Type any amount into the calculator below for a live figure. The table under it shows what several UNI amounts come to in HMSTR after fees. It is worked out from the page's latest quote and carries that quote's time. The daily table tracks the market rate between the two coins on each recent day, before swap fees, from xswap.to's own price record.

UNI to HMSTR Calculator

Enter an amount to see about how much you would receive. The estimate uses the live floating rate and already includes the payout network fee.

UNI Ethereum ERC-20
You get (estimate)
HMSTR TON Jetton
625,126.139865 HMSTR
Rate
1 UNI ≈ 31,256.3 HMSTR
Value in USD
≈ $92.52
Network Fee
385.6961398 HMSTR

UNI to HMSTR conversion table

Estimates after fees, worked out from one live quote taken at . The rate floats: the calculator and the swap form show the live figure.
You sendYou get (estimate after fees)
10 UNI≈ 311,450 HMSTR
50 UNI≈ 1,566,156 HMSTR
100 UNI≈ 3,134,539 HMSTR
500 UNI≈ 15,681,603 HMSTR
1,000 UNI≈ 31,365,433 HMSTR
5,000 UNI≈ 156,836,072 HMSTR
10,000 UNI≈ 313,674,371 HMSTR

UNI to HMSTR daily rate

Market rate before swap fees, from xswap.to's own daily price record, Nov 16, 2026 to Nov 22, 2026.

Highest38,322.8 HMSTR
Lowest29,924.5 HMSTR
Change, 6 days−14.79%
38,322.8 29,924.5
Nov 16, 2026Nov 22, 2026
DateRate
1 UNI ≈ 32,655.8 HMSTR
1 UNI ≈ 29,924.5 HMSTR
1 UNI ≈ 35,016 HMSTR
1 UNI ≈ 36,638.6 HMSTR
1 UNI ≈ 36,037.1 HMSTR
1 UNI ≈ 36,153.4 HMSTR
1 UNI ≈ 38,322.8 HMSTR
Live Market Snapshot Updated Nov 22, 2026 04:42 UTC
1 UNI price
$4.75
1 HMSTR price
$0.000148
1 UNI buys
31256.30699325 HMSTR

How to swap UNI to HMSTR

  1. Copy your HMSTR address

    Open your TON wallet's receive screen and copy the address it shows, which usually starts with UQ, the non-bounceable form wallet apps use for receiving. Paste it into Recipient Address and compare the first and last characters.

  2. Enter the UNI amount

    Type it in the form at the top. If it is under the pair's minimum, the form shows that minimum and one tap fills it in. The HMSTR estimate under it already has the payout fee taken out.

  3. Send UNI to the deposit address

    Press Exchange Now. Your order page shows a one-time Ethereum deposit address: send the amount you entered in one transaction. Send from a wallet set to Ethereum mainnet that holds enough ETH for gas, and keep the max fee it suggests.

  4. Follow the order until HMSTR arrives

    The status moves from waiting to confirming, exchanging, sending and finished. Keep the transaction ID from the order page until the HMSTR is in your wallet.

What the UNI to HMSTR swap costs

Two costs come out of the estimate before you see it: the exchange margin and the TON network fee for your payout. You pay the Ethereum gas fee yourself, in ETH: the gas the transfer uses times the base fee plus a priority tip, and most wallets suggest both. An ERC-20 transfer runs the token's contract, so it uses more gas than a plain ETH transfer, and that gas is paid in ETH.

The payout fee is a flat amount per payout, so it takes a larger share of a small swap, and the HMSTR you get per UNI drops near the minimum. The facts table below lists the typical network fees and the minimum with the date they were checked.

UNI to HMSTR at a glance

From live exchange data, refreshed hourly.

Item You send You receive
Asset Uniswap (UNI) Hamster Kombat (HMSTR)
Network Ethereum TON
Type ERC-20 token Jetton token
Contract 0x1f9840…01F984 EQAJ8uWd…drPcUo
Memo / tag Not needed Not needed
Network fee (typical, checked Nov 22, 2026) ≈ 0.05847 UNI ≈ 387.9 HMSTR
Route Cross-chain: Ethereum to TON
Rate Floating, estimate shown before you send
Minimum to send (typical, checked Nov 22, 2026) 0.1549716 UNI
Account / ID Not needed to start a swap

How long the UNI to HMSTR swap takes

The UNI to HMSTR swap is three waits in a row: the Ethereum network confirms your deposit, the exchange partner swaps it, and the TON network delivers the payout. Ethereum runs in 12-second slots, each with one validator chosen to propose a block, though a slot is sometimes empty; the exchange partner swaps once your deposit has the confirmations it requires. In rare cases the partner's compliance check pauses an order, which adds time. The stages in order:

  1. Deposit sent and seen

    Your wallet broadcasts the UNI, and the order page moves from waiting to confirming once the deposit is found.

  2. Ethereum includes it in a block

    Each 12-second slot can add a block. A deposit whose max fee is below the base fee can wait until the base fee falls or you speed it up.

  3. Exchange and HMSTR payout

    The partner swaps the UNI and sends HMSTR. The status reaches sending, then finished, and the payout hash appears on the order page.

  4. Payout final on TON

    Your wallet lists the HMSTR under your address once the transfer is in a block, and a masterchain block then makes it final.

Your HMSTR address for the payout

A TON wallet address is usually shown as 48 characters of letters, digits, hyphens and the underline sign, starting with UQ (non-bounceable, the form meant for wallets) or EQ (bounceable). The raw form is 0: followed by 64 hex characters. All forms point to the same account; for a new, unused wallet, give the UQ form.

Copy the address from your wallet's receive screen, not from your transaction history, where a scammer's lookalike address can sit next to yours, and compare the first and last characters after pasting. A payout sent to a wrong address cannot be reversed. Mistakes that cost a payout:

  • The EQ form of a wallet that has never sent anything: Gram (TON) sent in bounceable form to an undeployed wallet returns to the sender, so give the UQ form.
  • An exchange deposit address that needs a memo, entered without it or for a coin whose listing here has no memo field: the exchange cannot match the payout automatically.
  • A Jetton wallet or Jetton master address copied from an explorer: payouts must go to your regular wallet address, the one your wallet app shows.

Receiving HMSTR on TON: address and memo

Memo or tagNot used on this network.
Block explorertonviewer.com

More about swapping on TON

Send UNI on the right network

On the sending side, send UNI only on Ethereum, the network your order page names. UNI sent on another network does not reach the deposit address. UNI exists on more than one network, and each is a separate entry in the coin list. Choose the entry that matches the network your coins are on before you create the order.

After the HMSTR arrives

The payout is final once a masterchain block includes it, which normally takes about a second, and your wallet lists it under the address you pasted. If nothing shows, compare the wallet app's address with the one on the order page: one recovery phrase can control several TON wallets, one per wallet version, each with its own address and balance. Your HMSTR sits in a separate Jetton wallet contract linked to your address, which the incoming transfer opens if needed with Gram (TON) the sender attaches; moving it later takes Gram (TON) for fees, unless your wallet app offers gasless transfers.

If the address belongs to an exchange, check that the exchange gives it for HMSTR deposits on the TON network, note its minimum deposit, and enter the memo it shows; when the form has no memo field for HMSTR, receive to your own wallet instead. To check the payout yourself, open the payout hash from the order page in a TON explorer such as Tonviewer.

If your UNI deposit is slow or stuck

Look up the transaction hash on Etherscan. If it is still pending, its max fee is probably below the current base fee, which rises after blocks fuller than the target, or its tip is too small for validators to pick it. It can also wait behind an earlier pending transaction from your address with a lower nonce. If your wallet offers speed up, use it on the oldest pending one: the wallet resends the same transaction with the same nonce and a higher fee, so only one of the two can confirm.

Do not press cancel on a deposit, because a cancellation that confirms means nothing reaches the order. The sped-up version has a new hash, so give that one to support. If Etherscan marks the transaction as failed, the coins stayed in your wallet but the gas was spent, so ask support before you send again. A withdrawal from an exchange account can only be sped up by that exchange.

Never send the deposit a second time to speed things up: a second payment is a second deposit. If the order page has not moved on after your deposit confirmed, message @xswap_to on Telegram with the Ref. ID from the order page and your deposit hash.

What others can see of your UNI to HMSTR swap

Your deposit is public on Ethereum: your sending address, the deposit address, the amount and the fee show on Etherscan and any other explorer, and they stay there. The payout, its amount and your receiving address are visible to anyone in a TON explorer, together with your wallet's balance and token holdings. The exchange partner that processes the swap sees both sides: your deposit and your payout address.

Before you send

  • Leave enough ETH in your wallet for gas on top of what you send, because Ethereum rejects a transfer whose fee the balance cannot cover.
  • Copy your HMSTR address from the wallet's receive screen and compare its start and end after pasting.
  • Send the amount you entered in one transaction, and let your wallet add its network fee on top.
  • Bookmark the order page and save its Ref. ID, because the Track Order list is stored only in this browser.

UNI to HMSTR Frequently Asked Questions

How do I swap UNI to HMSTR?

Enter the UNI amount and your HMSTR address in the form at the top, press Exchange Now, and send UNI on Ethereum to the one-time deposit address on your order page. After the Ethereum network confirms the deposit, the exchange partner sends HMSTR on TON to your address. No account or email is needed.

How much HMSTR do I get for 1 UNI?

The amount table in the rate section shows it for several sizes, as an estimate after fees with the time of the quote. For your own amount, the UNI to HMSTR calculator asks for a live estimate. No figure is written here, because the rate floats.

How long does UNI to HMSTR take?

There is no set time: the Ethereum network confirms the deposit first, then the exchange partner swaps it and sends the HMSTR payout. The timing section on this page lists each stage, and the order page shows which one you are in.

Is there a minimum amount for UNI to HMSTR?

Yes, every pair has a minimum, and it moves with network conditions. The facts table on this page lists the last checked figure. The swap form warns you when your amount is under the current one. A deposit below it cannot be swapped, and getting those coins back is not assured.

Can I swap Uniswap to Hamster Kombat without KYC?

You need no account, and xswap.to asks for no ID. In rare cases the exchange partner's automated anti-money-laundering screening pauses a flagged swap and asks for verification, and the order then shows the status verifying. If that happens, message @xswap_to on Telegram with your transaction ID.

Why is the HMSTR I received different from the estimate?

The rate floats, so the market can move between the estimate and the moment your deposit confirms. A different deposit amount changes the payout too: if your wallet took its network fee out of the amount, less UNI arrived than you entered.

How do I swap HMSTR back to UNI?

Use the HMSTR to UNI page, linked next to the swap form. It works the same way in reverse: paste an Ethereum address, then send HMSTR to the one-time deposit address.

About these numbers

The calculator and the swap form ask for a live estimate for the amount you type; if one fails to load, try again a few seconds later. The amount table is worked out from the page's latest quote and the network fees in it, so treat it as a guide and use the calculator for your own amount. The daily rates come from xswap.to's own price record, one value per day, and show the market rate before swap fees. Fees and the minimum in the facts table are typical figures with their check date.

Guides for this swap

Related swaps

Popular swaps