Exchange Currencies Track Order Guides Telegram bot

Swap Uniswap (UNI) to Sign (SIGN) with no sign-up

Enter the UNI amount, paste your 0x address on Base from your own wallet, then send UNI on Ethereum to the one-time deposit address on your order page. Once the Ethereum network has confirmed the deposit, the exchange partner swaps it at the floating rate and sends SIGN on Base straight to your address.

Swap SIGN to UNI instead

Rate
1 UNI ≈ 523.8233 SIGN
Network Fee
-
Deposit Fee
-

Enter an address on the Base (ERC-20) network. Coins sent to an address on another network can be lost.

Swap in Telegram

No Account Needed to Start

Swap without creating an account or uploading ID. xswap.to never asks for your seed phrase or private keys, and the exchanged coins go straight to your wallet. In rare cases the exchange partner's compliance check can pause a swap and ask for verification.

Updated Written and checked by the xswap.to team

UNI to SIGN exchange rate

The UNI to SIGN rate on this page is an estimate for a real swap after fees, so it reads a little lower than the ratio of the two market prices. It floats with the market until your deposit confirms.

Type any amount into the calculator below for a live figure. The table under it shows what several UNI amounts come to in SIGN after fees. It is worked out from the page's latest quote and carries that quote's time. The daily table tracks the market rate between the two coins on each recent day, before swap fees, from xswap.to's own price record.

UNI to SIGN Calculator

Enter an amount to see about how much you would receive. The estimate uses the live floating rate and already includes the payout network fee.

UNI Ethereum ERC-20
You get (estimate)
SIGN Base ERC-20
10,476.4667648 SIGN
Rate
1 UNI ≈ 523.823 SIGN
Value in USD
≈ $94.64
Network Fee
42.0989009 SIGN

UNI to SIGN conversion table

Estimates after fees, worked out from one live quote taken at . The rate floats: the calculator and the swap form show the live figure.
You sendYou get (estimate after fees)
10 UNI≈ 5,201.6 SIGN
50 UNI≈ 26,301.1 SIGN
100 UNI≈ 52,675.4 SIGN
500 UNI≈ 263,670 SIGN
1,000 UNI≈ 527,413 SIGN
5,000 UNI≈ 2,637,360 SIGN
10,000 UNI≈ 5,274,793 SIGN

UNI to SIGN daily rate

Market rate before swap fees, from xswap.to's own daily price record, Nov 16, 2026 to Nov 22, 2026.

Highest594.227 SIGN
Lowest535.788 SIGN
Change, 6 days−8.22%
594.227 535.788
Nov 16, 2026Nov 22, 2026
DateRate
1 UNI ≈ 540.929 SIGN
1 UNI ≈ 535.788 SIGN
1 UNI ≈ 579.42 SIGN
1 UNI ≈ 587.782 SIGN
1 UNI ≈ 594.227 SIGN
1 UNI ≈ 589.688 SIGN
1 UNI ≈ 589.369 SIGN
Live Market Snapshot Updated Nov 22, 2026 11:07 UTC
1 UNI price
$4.83
1 SIGN price
$0.00903398
1 UNI buys
523.82333824 SIGN

How to swap UNI to SIGN

  1. Copy your SIGN address

    Open your wallet with Base selected as the network and copy the 0x address from its receive screen. Paste it into Recipient Address and compare the first and last characters.

  2. Enter the UNI amount

    Type it in the form at the top. If it is under the pair's minimum, the form shows that minimum and one tap fills it in. The SIGN estimate under it already has the payout fee taken out.

  3. Send UNI to the deposit address

    Press Exchange Now. Your order page shows a one-time Ethereum deposit address: send the amount you entered in one transaction. Send from a wallet set to Ethereum mainnet that holds enough ETH for gas, and keep the max fee it suggests.

  4. Follow the order until SIGN arrives

    The status moves from waiting to confirming, exchanging, sending and finished. Keep the transaction ID from the order page until the SIGN is in your wallet.

What the UNI to SIGN swap costs

Two costs come out of the estimate before you see it: the exchange margin and the Base network fee for your payout. You pay the Ethereum gas fee yourself, in ETH: the gas the transfer uses times the base fee plus a priority tip, and most wallets suggest both. An ERC-20 transfer runs the token's contract, so it uses more gas than a plain ETH transfer, and that gas is paid in ETH.

The payout fee is a flat amount per payout, so it takes a larger share of a small swap, and the SIGN you get per UNI drops near the minimum. The facts table below lists the typical network fees and the minimum with the date they were checked.

UNI to SIGN at a glance

From live exchange data, refreshed hourly.

Item You send You receive
Asset Uniswap (UNI) Sign (Base) (SIGN)
Network Ethereum Base
Type ERC-20 token ERC-20 token
Contract 0x1f9840…01F984 0x868FCE…87A4c3
Memo / tag Not needed Not needed
Network fee (typical, checked Nov 22, 2026) ≈ 0.05847 UNI ≈ 42.1 SIGN
Route Cross-chain: Ethereum to Base
Rate Floating, estimate shown before you send
Minimum to send (typical, checked Nov 22, 2026) 0.302468 UNI
Account / ID Not needed to start a swap

How long the UNI to SIGN swap takes

The UNI to SIGN swap is three waits in a row: the Ethereum network confirms your deposit, the exchange partner swaps it, and the Base network delivers the payout. Ethereum runs in 12-second slots, each with one validator chosen to propose a block, though a slot is sometimes empty; the exchange partner swaps once your deposit has the confirmations it requires. In rare cases the partner's compliance check pauses an order, which adds time. The stages in order:

  1. Deposit sent and seen

    Your wallet broadcasts the UNI, and the order page moves from waiting to confirming once the deposit is found.

  2. Ethereum includes it in a block

    Each 12-second slot can add a block. A deposit whose max fee is below the base fee can wait until the base fee falls or you speed it up.

  3. Exchange and SIGN payout

    The partner swaps the UNI and sends SIGN. The status reaches sending, then finished, and the payout hash appears on the order page.

  4. Payout lands on Base

    Your wallet lists it once a Base block includes the transaction, as long as the wallet is set to Base.

Your SIGN address for the payout

Base uses the Ethereum address format: 0x followed by 40 hexadecimal characters. Copy the address from your wallet's receive screen, not from your transaction history, where a scammer's lookalike address can sit next to yours, and compare the first and last characters after pasting. A payout sent to a wrong address cannot be reversed. Mistakes that cost a payout:

  • An exchange deposit address meant for Ethereum mainnet or another layer 2 such as OP Mainnet: the payout is sent on Base, a separate chain.
  • An address at a wallet or exchange that does not support Base, which then cannot show or credit the payout.
  • A smart contract wallet address, such as a multisig, that exists on another network but not on Base: getting a payout back then depends on deploying that wallet there.
  • A token contract address copied from Basescan instead of your own wallet address: tokens sent to a contract that cannot handle them can be stuck for good.

Receiving SIGN on Base: address and memo

Memo or tagNot used on this network.
Block explorerbasescan.org

More about swapping on Base

Which network your SIGN arrives on

This page pays SIGN on Base. The same coin is listed on other networks too, each as its own entry in the coin list, and the links under this section open the ones open for payouts now.

Pick the entry before you press Exchange Now. The same coin on another network is a different asset to your wallet: balances do not carry over, moving it later takes another transfer, and an address on the wrong network can lose the payout. On the sending side, send UNI only on Ethereum, the network your order page names. UNI sent on another network does not reach the deposit address.

After the SIGN arrives

The payout is a Base transaction, not an Ethereum mainnet one, so a wallet set to Ethereum shows nothing of it; switch yours to Base. The coins can be moved again once the transaction is in a block, and transfers within Base do not wait for the window that applies to withdrawals to Ethereum.

Moving the payout to Ethereum mainnet later takes a bridge. Through Base's standard bridge, a withdrawal can be finalized on Ethereum only after a window of 5 days, or 1 day when both of Base's proof systems back it, and proving and finalizing it are transactions on Ethereum. Your wallet may list the SIGN only after you add the token, and moving it later costs gas in ETH on Base, so keep some ETH there.

If the address belongs to an exchange, check that it accepts this coin on Base and what its minimum deposit is; for a token, check the contract address it accepts, not only the ticker. To check the payout yourself, open the payout hash from the order page in a Base explorer such as Basescan.

If your UNI deposit is slow or stuck

Look up the transaction hash on Etherscan. If it is still pending, its max fee is probably below the current base fee, which rises after blocks fuller than the target, or its tip is too small for validators to pick it. It can also wait behind an earlier pending transaction from your address with a lower nonce. If your wallet offers speed up, use it on the oldest pending one: the wallet resends the same transaction with the same nonce and a higher fee, so only one of the two can confirm.

Do not press cancel on a deposit, because a cancellation that confirms means nothing reaches the order. The sped-up version has a new hash, so give that one to support. If Etherscan marks the transaction as failed, the coins stayed in your wallet but the gas was spent, so ask support before you send again. A withdrawal from an exchange account can only be sped up by that exchange.

Never send the deposit a second time to speed things up: a second payment is a second deposit. If the order page has not moved on after your deposit confirmed, message @xswap_to on Telegram with the Ref. ID from the order page and your deposit hash.

What others can see of your UNI to SIGN swap

Your deposit is public on Ethereum: your sending address, the deposit address, the amount and the fee show on Etherscan and any other explorer, and they stay there. The payout, its amount and your receiving address are public on Basescan, where anyone who knows the address can see its whole history on Base. The exchange partner that processes the swap sees both sides: your deposit and your payout address.

Before you send

  • Leave enough ETH in your wallet for gas on top of what you send, because Ethereum rejects a transfer whose fee the balance cannot cover.
  • Copy your SIGN address from the wallet's receive screen and compare its start and end after pasting.
  • Send the amount you entered in one transaction, and let your wallet add its network fee on top.
  • Bookmark the order page and save its Ref. ID, because the Track Order list is stored only in this browser.

UNI to SIGN Frequently Asked Questions

How do I swap UNI to SIGN?

Enter the UNI amount and your SIGN address in the form at the top, press Exchange Now, and send UNI on Ethereum to the one-time deposit address on your order page. After the Ethereum network confirms the deposit, the exchange partner sends SIGN on Base to your address. No account or email is needed.

How much SIGN do I get for 1 UNI?

The amount table in the rate section shows it for several sizes, as an estimate after fees with the time of the quote. For your own amount, the UNI to SIGN calculator asks for a live estimate. No figure is written here, because the rate floats.

How long does UNI to SIGN take?

There is no set time: the Ethereum network confirms the deposit first, then the exchange partner swaps it and sends the SIGN payout. The timing section on this page lists each stage, and the order page shows which one you are in.

Is there a minimum amount for UNI to SIGN?

Yes, every pair has a minimum, and it moves with network conditions. The facts table on this page lists the last checked figure. The swap form warns you when your amount is under the current one. A deposit below it cannot be swapped, and getting those coins back is not assured.

Can I swap Uniswap to Sign without KYC?

You need no account, and xswap.to asks for no ID. In rare cases the exchange partner's automated anti-money-laundering screening pauses a flagged swap and asks for verification, and the order then shows the status verifying. If that happens, message @xswap_to on Telegram with your transaction ID.

Can I receive SIGN on another network?

Yes, through a different entry in the coin list, since this page pays SIGN on Base. The network section on this page links to the entries open for payouts now. Pick the entry before you press Exchange Now.

Why is the SIGN I received different from the estimate?

The rate floats, so the market can move between the estimate and the moment your deposit confirms. A different deposit amount changes the payout too: if your wallet took its network fee out of the amount, less UNI arrived than you entered.

How do I swap SIGN back to UNI?

Use the SIGN to UNI page, linked next to the swap form. It works the same way in reverse: paste an Ethereum address, then send SIGN to the one-time deposit address.

About these numbers

The calculator and the swap form ask for a live estimate for the amount you type; if one fails to load, try again a few seconds later. The amount table is worked out from the page's latest quote and the network fees in it, so treat it as a guide and use the calculator for your own amount. The daily rates come from xswap.to's own price record, one value per day, and show the market rate before swap fees. Fees and the minimum in the facts table are typical figures with their check date.

Guides for this swap

Related swaps

Popular swaps