Swap World Liberty Financial USD (USD1) to Catizen (CATI) with no sign-up
Enter the USD1 amount, paste a TON wallet address from your own wallet, then send USD1 on Ethereum to the one-time deposit address on your order page. Once the Ethereum network has confirmed the deposit, the exchange partner swaps it at the floating rate and sends CATI on TON straight to your address.
Swap without creating an account or uploading ID. xswap.to never asks for your seed phrase or private keys, and the exchanged coins go straight to your wallet. In rare cases the exchange partner's compliance check can pause a swap and ask for verification.
The USD1 to CATI rate on this page is an estimate for a real swap after fees, so it reads a little lower than the ratio of the two market prices. It floats with the market until your deposit confirms. Type any amount into the calculator below for a live figure.
USD1 to CATI Calculator
Enter an amount to see about how much you would receive. The estimate uses the live floating rate and already includes the payout network fee.
USD1EthereumERC-20
You get (estimate)
CATITONJetton
Rate
-
Value in USD
-
Network Fee
-
Live Market SnapshotUpdated Nov 22, 2026 15:20 UTC
1 USD1 price
$1.02
How to swap USD1 to CATI
1
Copy your CATI address
Open your TON wallet's receive screen and copy the address it shows, which usually starts with UQ, the non-bounceable form wallet apps use for receiving. Paste it into Recipient Address and compare the first and last characters.
2
Enter the USD1 amount
Type it in the form at the top. If it is under the pair's minimum, the form shows that minimum and one tap fills it in. The CATI estimate under it already has the payout fee taken out.
3
Send USD1 to the deposit address
Press Exchange Now. Your order page shows a one-time Ethereum deposit address: send the amount you entered in one transaction. Send from a wallet set to Ethereum mainnet that holds enough ETH for gas, and keep the max fee it suggests.
4
Follow the order until CATI arrives
The status moves from waiting to confirming, exchanging, sending and finished. Keep the transaction ID from the order page until the CATI is in your wallet.
What the USD1 to CATI swap costs
Two costs come out of the estimate before you see it: the exchange margin and the TON network fee for your payout. You pay the Ethereum gas fee yourself, in ETH: the gas the transfer uses times the base fee plus a priority tip, and most wallets suggest both. An ERC-20 transfer runs the token's contract, so it uses more gas than a plain ETH transfer, and that gas is paid in ETH.
The payout fee is a flat amount per payout, so it takes a larger share of a small swap, and the CATI you get per USD1 drops near the minimum. The facts table below lists the typical network fees and the minimum with the date they were checked.
USD1 to CATI at a glance
From live exchange data, refreshed hourly.
Item
You send
You receive
Asset
World Liberty Financial USD (Ethereum) (USD1)
Catizen (CATI)
Network
Ethereum
TON
Type
ERC-20 token
Jetton token
Contract
0x8d0D00…f08B0d
EQD-cvR0…9UAAD7
Memo / tag
Not needed
Not needed
Network fee (typical, checked Nov 22, 2026)
≈ 0.2853 USD1
-
Route
Cross-chain: Ethereum to TON
Rate
Floating, estimate shown before you send
Minimum to send (typical, checked Nov 22, 2026)
0.6397975 USD1
Account / ID
Not needed to start a swap
How long the USD1 to CATI swap takes
The USD1 to CATI swap is three waits in a row: the Ethereum network confirms your deposit, the exchange partner swaps it, and the TON network delivers the payout. Ethereum runs in 12-second slots, each with one validator chosen to propose a block, though a slot is sometimes empty; the exchange partner swaps once your deposit has the confirmations it requires. In rare cases the partner's compliance check pauses an order, which adds time. The stages in order:
1Deposit sent and seen
Your wallet broadcasts the USD1, and the order page moves from waiting to confirming once the deposit is found.
2Ethereum includes it in a block
Each 12-second slot can add a block. A deposit whose max fee is below the base fee can wait until the base fee falls or you speed it up.
3Exchange and CATI payout
The partner swaps the USD1 and sends CATI. The status reaches sending, then finished, and the payout hash appears on the order page.
4Payout final on TON
Your wallet lists the CATI under your address once the transfer is in a block, and a masterchain block then makes it final.
Your CATI address for the payout
A TON wallet address is usually shown as 48 characters of letters, digits, hyphens and the underline sign, starting with UQ (non-bounceable, the form meant for wallets) or EQ (bounceable). The raw form is 0: followed by 64 hex characters. All forms point to the same account; for a new, unused wallet, give the UQ form.
Copy the address from your wallet's receive screen, not from your transaction history, where a scammer's lookalike address can sit next to yours, and compare the first and last characters after pasting. A payout sent to a wrong address cannot be reversed. Mistakes that cost a payout:
The EQ form of a wallet that has never sent anything: Gram (TON) sent in bounceable form to an undeployed wallet returns to the sender, so give the UQ form.
An exchange deposit address that needs a memo, entered without it or for a coin whose listing here has no memo field: the exchange cannot match the payout automatically.
A Jetton wallet or Jetton master address copied from an explorer: payouts must go to your regular wallet address, the one your wallet app shows.
On the sending side, send USD1 only on Ethereum, the network your order page names. USD1 sent on another network does not reach the deposit address. USD1 exists on more than one network, and each is a separate entry in the coin list. Choose the entry that matches the network your coins are on before you create the order.
The payout is final once a masterchain block includes it, which normally takes about a second, and your wallet lists it under the address you pasted. If nothing shows, compare the wallet app's address with the one on the order page: one recovery phrase can control several TON wallets, one per wallet version, each with its own address and balance. Your CATI sits in a separate Jetton wallet contract linked to your address, which the incoming transfer opens if needed with Gram (TON) the sender attaches; moving it later takes Gram (TON) for fees, unless your wallet app offers gasless transfers.
If the address belongs to an exchange, check that the exchange gives it for CATI deposits on the TON network, note its minimum deposit, and enter the memo it shows; when the form has no memo field for CATI, receive to your own wallet instead. To check the payout yourself, open the payout hash from the order page in a TON explorer such as Tonviewer.
If your USD1 deposit is slow or stuck
Look up the transaction hash on Etherscan. If it is still pending, its max fee is probably below the current base fee, which rises after blocks fuller than the target, or its tip is too small for validators to pick it. It can also wait behind an earlier pending transaction from your address with a lower nonce. If your wallet offers speed up, use it on the oldest pending one: the wallet resends the same transaction with the same nonce and a higher fee, so only one of the two can confirm.
Do not press cancel on a deposit, because a cancellation that confirms means nothing reaches the order. The sped-up version has a new hash, so give that one to support. If Etherscan marks the transaction as failed, the coins stayed in your wallet but the gas was spent, so ask support before you send again. A withdrawal from an exchange account can only be sped up by that exchange.
Never send the deposit a second time to speed things up: a second payment is a second deposit. If the order page has not moved on after your deposit confirmed, message @xswap_to on Telegram with the Ref. ID from the order page and your deposit hash.
What others can see of your USD1 to CATI swap
Your deposit is public on Ethereum: your sending address, the deposit address, the amount and the fee show on Etherscan and any other explorer, and they stay there. The payout, its amount and your receiving address are visible to anyone in a TON explorer, together with your wallet's balance and token holdings. The exchange partner that processes the swap sees both sides: your deposit and your payout address.
Before you send
Leave enough ETH in your wallet for gas on top of what you send, because Ethereum rejects a transfer whose fee the balance cannot cover.
Copy your CATI address from the wallet's receive screen and compare its start and end after pasting.
Send the amount you entered in one transaction, and let your wallet add its network fee on top.
Bookmark the order page and save its Ref. ID, because the Track Order list is stored only in this browser.
USD1 to CATI Frequently Asked Questions
How do I swap USD1 to CATI?
Enter the USD1 amount and your CATI address in the form at the top, press Exchange Now, and send USD1 on Ethereum to the one-time deposit address on your order page. After the Ethereum network confirms the deposit, the exchange partner sends CATI on TON to your address. No account or email is needed.
How much CATI do I get for 1 USD1?
Type 1 into the USD1 to CATI calculator on this page for a live estimate after fees. No figure is written here, because the rate floats and a number in the text would soon be out of date.
How long does USD1 to CATI take?
There is no set time: the Ethereum network confirms the deposit first, then the exchange partner swaps it and sends the CATI payout. The timing section on this page lists each stage, and the order page shows which one you are in.
Is there a minimum amount for USD1 to CATI?
Yes, every pair has a minimum, and it moves with network conditions. The facts table on this page lists the last checked figure. The swap form warns you when your amount is under the current one. A deposit below it cannot be swapped, and getting those coins back is not assured.
Can I swap World Liberty Financial USD to Catizen without KYC?
You need no account, and xswap.to asks for no ID. In rare cases the exchange partner's automated anti-money-laundering screening pauses a flagged swap and asks for verification, and the order then shows the status verifying. If that happens, message @xswap_to on Telegram with your transaction ID.
Why is the CATI I received different from the estimate?
The rate floats, so the market can move between the estimate and the moment your deposit confirms. A different deposit amount changes the payout too: if your wallet took its network fee out of the amount, less USD1 arrived than you entered.
How do I swap CATI back to USD1?
Use the CATI to USD1 page, linked next to the swap form. It works the same way in reverse: paste an Ethereum address, then send CATI to the one-time deposit address.
About these numbers
The calculator and the swap form ask for a live estimate for the amount you type; if one fails to load, try again a few seconds later. Fees and the minimum in the facts table are typical figures with their check date.