Exchange Currencies Track Order Guides Telegram bot

Swap World Liberty Financial USD (USD1) to IoTeX (IOTX) with no sign-up

Enter the USD1 amount, paste a BNB Smart Chain address from your own wallet, then send USD1 on Solana to the one-time deposit address on your order page. Once the Solana network has confirmed the deposit, the exchange partner swaps it at the floating rate and sends IOTX on BNB Smart Chain straight to your address.

Swap IOTX to USD1 instead

Network Fee
-
Deposit Fee
-

Enter an address on the BNB Smart Chain (BEP-20) network. Coins sent to an address on another network can be lost.

Swap in Telegram

No Account Needed to Start

Swap without creating an account or uploading ID. xswap.to never asks for your seed phrase or private keys, and the exchanged coins go straight to your wallet. In rare cases the exchange partner's compliance check can pause a swap and ask for verification.

Updated Written and checked by the xswap.to team

USD1 to IOTX exchange rate

The USD1 to IOTX rate on this page is an estimate for a real swap after fees, so it reads a little lower than the ratio of the two market prices. It floats with the market until your deposit confirms. Type any amount into the calculator below for a live figure.

USD1 to IOTX Calculator

Enter an amount to see about how much you would receive. The estimate uses the live floating rate and already includes the payout network fee.

USD1 Solana SPL
You get (estimate)
IOTX BNB Chain BEP-20
0
Rate
-
Network Fee
-
Live Market Snapshot Updated Nov 22, 2026 06:31 UTC
1 USD1 price
$1.03

How to swap USD1 to IOTX

  1. Copy your IOTX address

    Open your wallet with BNB Smart Chain selected and copy your 0x address from its receive screen; BNB and BEP-20 tokens use that one address. Paste it into Recipient Address and compare the first and last characters.

  2. Enter the USD1 amount

    Type it in the form at the top. If it is under the pair's minimum, the form shows that minimum and one tap fills it in. The IOTX estimate under it already has the payout fee taken out.

  3. Send USD1 to the deposit address

    Press Exchange Now. Your order page shows a one-time Solana deposit address: send the amount you entered in one transaction. Send from any Solana wallet and copy the transaction signature, Solana's name for the transaction ID, so you can look the deposit up later.

  4. Follow the order until IOTX arrives

    The status moves from waiting to confirming, exchanging, sending and finished. Keep the transaction ID from the order page until the IOTX is in your wallet.

What the USD1 to IOTX swap costs

Two costs come out of the estimate before you see it: the exchange margin and the BNB Smart Chain network fee for your payout. The Solana network fee is paid in SOL, normally by the sending wallet: a base charge per signature plus any priority fee, charged even if the transaction fails and not tied to the amount. If the deposit address has never held USD1, your wallet must create its token account in the same transaction, which costs extra SOL as rent that you do not get back.

The payout fee is a flat amount per payout, so it takes a larger share of a small swap, and the IOTX you get per USD1 drops near the minimum.

USD1 to IOTX at a glance

From live exchange data, refreshed hourly.

Item You send You receive
Asset World Liberty Financial USD (Solana) (USD1) IoTeX (IOTX)
Network Solana BNB Smart Chain
Type SPL token BEP-20 token
Contract USD1ttGY…zvEmuB 0x9678e4…0064e5
Memo / tag Not needed Not needed
Route Cross-chain: Solana to BNB Smart Chain
Rate Floating, estimate shown before you send
Minimum to send (typical, checked Nov 22, 2026) 0.383114 USD1
Account / ID Not needed to start a swap

How long the USD1 to IOTX swap takes

The USD1 to IOTX swap is three waits in a row: the Solana network confirms your deposit, the exchange partner swaps it, and the BNB Smart Chain network delivers the payout. Solana produces blocks in slots of about 200 milliseconds, and the exchange partner swaps after your deposit has the confirmations it requires. In rare cases the partner's compliance check pauses an order, which adds time. The stages in order:

  1. Deposit sent and seen

    Your wallet broadcasts the USD1, and the order page moves from waiting to confirming once the deposit is found.

  2. Solana finalizes the deposit

    Once a block includes the deposit, Solana's Alpenglow consensus targets finality in roughly 150 milliseconds. A transaction that misses its blockhash window expires instead of waiting.

  3. Exchange and IOTX payout

    The partner swaps the USD1 and sends IOTX. The status reaches sending, then finished, and the payout hash appears on the order page.

  4. Payout final on BNB Smart Chain

    Your wallet shows the payout once a block includes it, and in most cases the block is final within two blocks.

Your IOTX address for the payout

BSC uses the Ethereum address format: 0x followed by 40 hexadecimal characters, and an Ethereum wallet's address works on BSC too. An address that starts with bnb1 belongs to the old BNB Beacon Chain, which stopped processing transactions in November 2024, so it cannot receive a BSC payout.

Copy the address from your wallet's receive screen, not from your transaction history, where a scammer's lookalike address can sit next to yours, and compare the first and last characters after pasting. A payout sent to a wrong address cannot be reversed. Mistakes that cost a payout:

  • An exchange deposit address meant for IOTX on Ethereum or opBNB: the 0x address can look the same, but the exchange may not credit a BNB Smart Chain payout.
  • A token contract address copied from BscScan instead of your own wallet address: tokens sent to a contract that cannot handle them can be lost.
  • A multisig or other smart contract wallet deployed on another network but not on BNB Smart Chain, where a payout stays stuck unless the wallet can be recreated there.

Receiving IOTX on BNB Smart Chain: address and memo

Memo or tagNot used on this network.
Block explorerbscscan.com

More about swapping on BNB Smart Chain

Send USD1 on the right network

On the sending side, send USD1 only on Solana, the network your order page names. USD1 sent on another network does not reach the deposit address. USD1 exists on more than one network, and each is a separate entry in the coin list. Choose the entry that matches the network your coins are on before you create the order.

After the IOTX arrives

The payout shows in your wallet once a block includes it. BNB Smart Chain finalizes a block within two blocks when at least two thirds of validators vote; if too few vote, it falls back to probabilistic finality, where each further block makes the payout harder to reverse. You need no BNB to receive it, because the sender pays the gas. Moving the IOTX later costs gas paid in BNB, so keep some BNB at that address. As a BEP-20 token, this IOTX stays on BNB Smart Chain; moving it elsewhere takes a bridge or another swap.

If the address belongs to an exchange, check that the exchange credits IOTX on BNB Smart Chain at that address and what its minimum deposit is; a deposit below the minimum or on a network it does not support may not be credited. To check the payout yourself, open the payout hash from the order page in a BNB Smart Chain explorer such as BscScan.

If your USD1 deposit is slow or stuck

Look up the transaction signature on a Solana explorer such as Solscan. By default, a Solana transaction expires if no block includes it within 150 blocks of the blockhash it was signed with, about 30 seconds at the current 200-millisecond slots, and after that it can never be processed.

A transaction the explorer marks as failed moved no coins but still cost its fee, and it stays failed. Send again only once the first attempt shows as failed, or has expired without your balance dropping; while it may still land, a second send could become a second deposit. A signed transaction's fee cannot be raised, so when blocks are busy, give the new attempt a higher priority fee, if your wallet lets you set one.

Never send the deposit a second time to speed things up: a second payment is a second deposit. If the order page has not moved on after your deposit confirmed, message @xswap_to on Telegram with the Ref. ID from the order page and your deposit hash.

What others can see of your USD1 to IOTX swap

Your deposit is public on Solana: anyone can look up the sending wallet, the deposit address, the amount and the fee in an explorer such as Solscan. The payout, its amount and your 0x address are public on BscScan, and so is everything that address does later on BNB Smart Chain. The exchange partner that processes the swap sees both sides: your deposit and your payout address.

Before you send

  • Check that the sending wallet holds SOL for the fee besides the USD1 you send, before you create the order.
  • Copy your IOTX address from the wallet's receive screen and compare its start and end after pasting.
  • Send the amount you entered in one transaction, and let your wallet add its network fee on top.
  • Bookmark the order page and save its Ref. ID, because the Track Order list is stored only in this browser.

USD1 to IOTX Frequently Asked Questions

How do I swap USD1 to IOTX?

Enter the USD1 amount and your IOTX address in the form at the top, press Exchange Now, and send USD1 on Solana to the one-time deposit address on your order page. After the Solana network confirms the deposit, the exchange partner sends IOTX on BNB Smart Chain to your address. No account or email is needed.

How much IOTX do I get for 1 USD1?

Type 1 into the USD1 to IOTX calculator on this page for a live estimate after fees. No figure is written here, because the rate floats and a number in the text would soon be out of date.

How long does USD1 to IOTX take?

There is no set time: the Solana network confirms the deposit first, then the exchange partner swaps it and sends the IOTX payout. The timing section on this page lists each stage, and the order page shows which one you are in.

Is there a minimum amount for USD1 to IOTX?

Yes, every pair has a minimum, and it moves with network conditions. The facts table on this page lists the last checked figure. The swap form warns you when your amount is under the current one. A deposit below it cannot be swapped, and getting those coins back is not assured.

Can I swap World Liberty Financial USD to IoTeX without KYC?

You need no account, and xswap.to asks for no ID. In rare cases the exchange partner's automated anti-money-laundering screening pauses a flagged swap and asks for verification, and the order then shows the status verifying. If that happens, message @xswap_to on Telegram with your transaction ID.

Why is the IOTX I received different from the estimate?

The rate floats, so the market can move between the estimate and the moment your deposit confirms. A different deposit amount changes the payout too: if your wallet took its network fee out of the amount, less USD1 arrived than you entered.

How do I swap IOTX back to USD1?

Use the IOTX to USD1 page, linked next to the swap form. It works the same way in reverse: paste a Solana address, then send IOTX to the one-time deposit address.

About these numbers

The calculator and the swap form ask for a live estimate for the amount you type; if one fails to load, try again a few seconds later.

Guides for this swap

Related swaps

Popular swaps