Swap Ethena USDe (USDE) to Algorand (ALGO) with no sign-up
Enter the USDE amount, paste an Algorand address from your own wallet, then send USDE on TON to the one-time deposit address on your order page. Once the TON network has confirmed the deposit, the exchange partner swaps it at the floating rate and sends ALGO straight to your address.
Swap without creating an account or uploading ID. xswap.to never asks for your seed phrase or private keys, and the exchanged coins go straight to your wallet. In rare cases the exchange partner's compliance check can pause a swap and ask for verification.
The USDE to ALGO rate on this page is an estimate for a real swap after fees, so it reads a little lower than the ratio of the two market prices. It floats with the market until your deposit confirms. Type any amount into the calculator below for a live figure.
USDE to ALGO Calculator
Enter an amount to see about how much you would receive. The estimate uses the live floating rate and already includes the payout network fee.
USDETONJetton
You get (estimate)
ALGOAlgorand
Rate
-
Value in USD
-
Network Fee
-
Live Market SnapshotUpdated Nov 22, 2026 23:46 UTC
1 USDE price
$0.7157
1 ALGO price
$0.0773
How to swap USDE to ALGO
1
Copy your ALGO address
Open your Algorand wallet's receive screen and copy the full address of the account that should hold the payout. Paste it into Recipient Address and compare the first and last characters. If the address comes from an exchange, also enter the memo it shows with the address.
2
Enter the USDE amount
Type it in the form at the top. If it is under the pair's minimum, the form shows that minimum and one tap fills it in. The ALGO estimate under it already has the payout fee taken out.
3
Send USDE to the deposit address
Press Exchange Now. Your order page shows a one-time TON deposit address: send the amount you entered in one transaction. Send from any TON wallet; if the order page shows a memo, use one that has a Comment field and enter the memo there.
4
Follow the order until ALGO arrives
The status moves from waiting to confirming, exchanging, sending and finished. Keep the transaction ID from the order page until the ALGO is in your wallet.
What the USDE to ALGO swap costs
Two costs come out of the estimate before you see it: the exchange margin and the Algorand network fee for your payout. The fee for your TON deposit is paid in Gram (TON), by your wallet or, in apps with gasless transfers, by a relay service; validators set fee levels in the network configuration, so there is no higher rate to choose. A Jetton transfer such as USDE also attaches Gram (TON) to pay the token contracts, including opening the receiver's Jetton wallet if it has none; the unused part normally comes back to you.
The payout fee is a flat amount per payout, so it takes a larger share of a small swap, and the ALGO you get per USDE drops near the minimum. The facts table below lists the typical network fees and the minimum with the date they were checked.
USDE to ALGO at a glance
From live exchange data, refreshed hourly.
Item
You send
You receive
Asset
Ethena USDe (Ton) (USDE)
Algorand (ALGO)
Network
TON
Algorand
Type
Jetton token
Native coin
Contract
EQAIb6Km…2dzP5f
-
Memo / tag
Include the memo shown on your order page
Required with your address
Network fee (typical, checked Nov 22, 2026)
-
≈ 0.001 ALGO
Route
Cross-chain: TON to Algorand
Rate
Floating, estimate shown before you send
Minimum to send (typical, checked Nov 22, 2026)
0.197908 USDE
Account / ID
Not needed to start a swap
How long the USDE to ALGO swap takes
The USDE to ALGO swap is three waits in a row: the TON network confirms your deposit, the exchange partner swaps it, and the Algorand network delivers the payout. TON's masterchain produces a block about every 400 milliseconds, and the exchange partner swaps after your deposit has the confirmations it requires. In rare cases the partner's compliance check pauses an order, which adds time. The stages in order:
1Deposit sent and seen
Your wallet broadcasts the USDE, and the order page moves from waiting to confirming once the deposit is found.
2Masterchain block makes it final
A TON transaction cannot be reversed once a masterchain block includes it, which takes about a second when the network runs normally.
3Exchange and ALGO payout
The partner swaps the USDE and sends ALGO. The status reaches sending, then finished, and the payout hash appears on the order page.
4Payout final in a block
Your wallet shows the ALGO once a block includes the payout, usually a few seconds after it is sent, and it is final from then on.
Your ALGO address for the payout
An Algorand address is 58 characters of uppercase letters A to Z and digits 2 to 7, with no prefix. It includes a checksum, but copy and paste it from your wallet's receive screen instead of typing it.
Copy the address from your wallet's receive screen, not from your transaction history, where a scammer's lookalike address can sit next to yours, and compare the first and last characters after pasting. A payout sent to a wrong address cannot be reversed. ALGO can also carry a memo. If your address comes from an exchange, enter the memo it gives you, because the exchange uses it to credit your account; a wallet you control usually needs none. Mistakes that cost a payout:
Leaving out the memo or note an exchange asks for: the ALGO reaches the exchange's address, but nothing tells the exchange which account to credit.
An account rekeyed to another key you no longer hold: the payout arrives at the address, but only that other key can move it.
Receiving ALGO on Algorand: address and memo
Memo or tag
Needed when the receiving wallet asks for one, which exchange accounts usually do. Enter it in the memo field of the form.
On the sending side, send USDE only on TON, the network your order page names. USDE sent on another network does not reach the deposit address. USDE exists on more than one network, and each is a separate entry in the coin list. Choose the entry that matches the network your coins are on before you create the order.
The payout is an Algorand transaction and is final as soon as a block includes it, usually a few seconds after it is sent. Every Algorand account must keep a minimum balance in ALGO, which rises with each asset the account has opted in to, so that part of the balance cannot be spent. Every later transaction also pays its fee in ALGO, including transfers of ASA tokens. If the address has never held ALGO, the payout opens its account on the chain, and from then on the minimum balance stays in the account until it is closed.
If the address belongs to an exchange, copy the address and any memo or note from its deposit page for the Algorand network, and check its minimum deposit. To check the payout yourself, open the payout hash from the order page in an Algorand explorer such as allo.info.
If your USDE deposit is slow or stuck
A TON transfer runs as a chain of transactions, so success on your wallet's side does not prove the deposit arrived. Open your wallet's transaction in an explorer such as Tonviewer and follow it to the deposit address: a Jetton transfer with too little Gram (TON) attached can fail on the way, and a failed transfer may bounce back to you, minus fees.
If the transfer reached the deposit address but the order still says waiting, check that it carried the memo, if the order page showed one. If your wallet reports the transfer as expired or failed and the explorer shows nothing leaving your wallet, no coins were sent, and the wallet can sign a new transfer.
Never send the deposit a second time to speed things up: a second payment is a second deposit. If the order page has not moved on after your deposit confirmed, message @xswap_to on Telegram with the Ref. ID from the order page and your deposit hash.
What others can see of your USDE to ALGO swap
Your deposit is public on TON: the sending wallet, the deposit address, the amount and any plain text comment, the memo included, can be read by anyone in an explorer. The payout, its amount, your address and any note are visible to anyone on an Algorand explorer such as allo.info, and they stay in the chain's history. The exchange partner that processes the swap sees both sides: your deposit and your payout address.
Before you send
Leave some Gram (TON) in the wallet after the amount you send, because every TON transfer, Jetton transfers included, pays its fees in Gram (TON).
Copy your ALGO address from the wallet's receive screen and compare its start and end after pasting.
Enter the memo your exchange gives you for ALGO, or the payout cannot be credited to your account.
If the order page shows a memo with the deposit address, add it when you send USDE, or the deposit cannot be matched.
Send the amount you entered in one transaction, and let your wallet add its network fee on top.
Bookmark the order page and save its Ref. ID, because the Track Order list is stored only in this browser.
USDE to ALGO Frequently Asked Questions
How do I swap USDE to ALGO?
Enter the USDE amount and your ALGO address in the form at the top, press Exchange Now, and send USDE on TON to the one-time deposit address on your order page. After the TON network confirms the deposit, the exchange partner sends ALGO to your address. No account or email is needed.
How much ALGO do I get for 1 USDE?
Type 1 into the USDE to ALGO calculator on this page for a live estimate after fees. No figure is written here, because the rate floats and a number in the text would soon be out of date.
How long does USDE to ALGO take?
There is no set time: the TON network confirms the deposit first, then the exchange partner swaps it and sends the ALGO payout. The timing section on this page lists each stage, and the order page shows which one you are in.
Is there a minimum amount for USDE to ALGO?
Yes, every pair has a minimum, and it moves with network conditions. The facts table on this page lists the last checked figure. The swap form warns you when your amount is under the current one. A deposit below it cannot be swapped, and getting those coins back is not assured.
Can I swap Ethena USDe to Algorand without KYC?
You need no account, and xswap.to asks for no ID. In rare cases the exchange partner's automated anti-money-laundering screening pauses a flagged swap and asks for verification, and the order then shows the status verifying. If that happens, message @xswap_to on Telegram with your transaction ID.
Do I need a memo or tag to swap USDE to ALGO?
For the payout, only if your ALGO address belongs to an exchange: enter the memo it shows with the address. A wallet you control usually needs none. For the deposit, only if the order page shows a memo next to the deposit address: your USDE must then carry it to be matched to your order.
Why is the ALGO I received different from the estimate?
The rate floats, so the market can move between the estimate and the moment your deposit confirms. A different deposit amount changes the payout too: if your wallet took its network fee out of the amount, less USDE arrived than you entered.
How do I swap ALGO back to USDE?
Use the ALGO to USDE page, linked next to the swap form. It works the same way in reverse: paste a TON address, then send ALGO to the one-time deposit address.
About these numbers
The calculator and the swap form ask for a live estimate for the amount you type; if one fails to load, try again a few seconds later. Fees and the minimum in the facts table are typical figures with their check date.