Swap Ethena USDe (USDE) to Ape and Pepe (APEPE) with no sign-up
Enter the USDE amount, paste a Polygon PoS address from your own wallet, then send USDE on TON to the one-time deposit address on your order page. Once the TON network has confirmed the deposit, the exchange partner swaps it at the floating rate and sends APEPE on Polygon PoS straight to your address.
Swap without creating an account or uploading ID. xswap.to never asks for your seed phrase or private keys, and the exchanged coins go straight to your wallet. In rare cases the exchange partner's compliance check can pause a swap and ask for verification.
The USDE to APEPE rate on this page is an estimate for a real swap after fees, so it reads a little lower than the ratio of the two market prices. It floats with the market until your deposit confirms. Type any amount into the calculator below for a live figure.
USDE to APEPE Calculator
Enter an amount to see about how much you would receive. The estimate uses the live floating rate and already includes the payout network fee.
USDETONJetton
You get (estimate)
APEPEPolygonERC-20
Rate
-
Value in USD
-
Network Fee
-
Live Market SnapshotUpdated Nov 22, 2026 21:28 UTC
1 USDE price
$0.7157
How to swap USDE to APEPE
1
Copy your APEPE address
Open your wallet with Polygon PoS selected, which wallets may list as Polygon or Polygon Mainnet, and copy your 0x address from its receive screen. Paste it into Recipient Address and compare the first and last characters.
2
Enter the USDE amount
Type it in the form at the top. If it is under the pair's minimum, the form shows that minimum and one tap fills it in. The APEPE estimate under it already has the payout fee taken out.
3
Send USDE to the deposit address
Press Exchange Now. Your order page shows a one-time TON deposit address: send the amount you entered in one transaction. Send from any TON wallet; if the order page shows a memo, use one that has a Comment field and enter the memo there.
4
Follow the order until APEPE arrives
The status moves from waiting to confirming, exchanging, sending and finished. Keep the transaction ID from the order page until the APEPE is in your wallet.
What the USDE to APEPE swap costs
Two costs come out of the estimate before you see it: the exchange margin and the Polygon PoS network fee for your payout. The fee for your TON deposit is paid in Gram (TON), by your wallet or, in apps with gasless transfers, by a relay service; validators set fee levels in the network configuration, so there is no higher rate to choose. A Jetton transfer such as USDE also attaches Gram (TON) to pay the token contracts, including opening the receiver's Jetton wallet if it has none; the unused part normally comes back to you.
The payout fee is a flat amount per payout, so it takes a larger share of a small swap, and the APEPE you get per USDE drops near the minimum.
USDE to APEPE at a glance
From live exchange data, refreshed hourly.
Item
You send
You receive
Asset
Ethena USDe (Ton) (USDE)
Ape and Pepe (APEPE)
Network
TON
Polygon PoS
Type
Jetton token
ERC-20 token
Contract
EQAIb6Km…2dzP5f
0xA3f751…D63D3A
Memo / tag
Include the memo shown on your order page
Not needed
Route
Cross-chain: TON to Polygon PoS
Rate
Floating, estimate shown before you send
Account / ID
Not needed to start a swap
How long the USDE to APEPE swap takes
The USDE to APEPE swap is three waits in a row: the TON network confirms your deposit, the exchange partner swaps it, and the Polygon PoS network delivers the payout. TON's masterchain produces a block about every 400 milliseconds, and the exchange partner swaps after your deposit has the confirmations it requires. In rare cases the partner's compliance check pauses an order, which adds time. The stages in order:
1Deposit sent and seen
Your wallet broadcasts the USDE, and the order page moves from waiting to confirming once the deposit is found.
2Masterchain block makes it final
A TON transaction cannot be reversed once a masterchain block includes it, which takes about a second when the network runs normally.
3Exchange and APEPE payout
The partner swaps the USDE and sends APEPE. The status reaches sending, then finished, and the payout hash appears on the order page.
4Payout final on Polygon PoS
Your wallet shows the payout once a block includes it, and a milestone then finalizes that block for good.
Your APEPE address for the payout
Polygon PoS uses the Ethereum address format: 0x followed by 40 hexadecimal characters. Copy the address from your wallet's receive screen, not from your transaction history, where a scammer's lookalike address can sit next to yours, and compare the first and last characters after pasting. A payout sent to a wrong address cannot be reversed. Mistakes that cost a payout:
An exchange deposit address meant for APEPE on Ethereum or another network: the 0x address can look the same, but the exchange may not credit a Polygon PoS payout.
A token contract address copied from PolygonScan instead of your own wallet address: tokens sent to a contract that cannot handle them can be lost.
A multisig or other smart contract wallet deployed on another network but not on Polygon PoS, where a payout stays stuck unless the wallet can be recreated there.
On the sending side, send USDE only on TON, the network your order page names. USDE sent on another network does not reach the deposit address. USDE exists on more than one network, and each is a separate entry in the coin list. Choose the entry that matches the network your coins are on before you create the order.
The payout shows in your wallet once a block includes it, and a later milestone finalizes that block, after which it cannot be reorganized. You need no POL to receive the payout, because the sender pays the gas. A wallet that still shows MATIC as the network's own coin is showing the same POL balance under the old symbol. Moving the APEPE later costs gas paid in POL, so keep some POL at that address. Some tokens have two versions on Polygon PoS with different contracts, such as native USDC and bridged USDC.e, and exchanges may accept only one.
If the address belongs to an exchange, check that the exchange credits APEPE on Polygon PoS, not only on Ethereum, and what its minimum deposit is; a deposit on a network it does not support may not be credited. To check the payout yourself, open the payout hash from the order page in a Polygon PoS explorer such as PolygonScan.
If your USDE deposit is slow or stuck
A TON transfer runs as a chain of transactions, so success on your wallet's side does not prove the deposit arrived. Open your wallet's transaction in an explorer such as Tonviewer and follow it to the deposit address: a Jetton transfer with too little Gram (TON) attached can fail on the way, and a failed transfer may bounce back to you, minus fees.
If the transfer reached the deposit address but the order still says waiting, check that it carried the memo, if the order page showed one. If your wallet reports the transfer as expired or failed and the explorer shows nothing leaving your wallet, no coins were sent, and the wallet can sign a new transfer.
Never send the deposit a second time to speed things up: a second payment is a second deposit. If the order page has not moved on after your deposit confirmed, message @xswap_to on Telegram with the Ref. ID from the order page and your deposit hash.
What others can see of your USDE to APEPE swap
Your deposit is public on TON: the sending wallet, the deposit address, the amount and any plain text comment, the memo included, can be read by anyone in an explorer. The payout, its amount and your 0x address are public on PolygonScan, and so is everything that address does later on Polygon PoS. The exchange partner that processes the swap sees both sides: your deposit and your payout address.
Before you send
Leave some Gram (TON) in the wallet after the amount you send, because every TON transfer, Jetton transfers included, pays its fees in Gram (TON).
Copy your APEPE address from the wallet's receive screen and compare its start and end after pasting.
If the order page shows a memo with the deposit address, add it when you send USDE, or the deposit cannot be matched.
Send the amount you entered in one transaction, and let your wallet add its network fee on top.
Bookmark the order page and save its Ref. ID, because the Track Order list is stored only in this browser.
USDE to APEPE Frequently Asked Questions
How do I swap USDE to APEPE?
Enter the USDE amount and your APEPE address in the form at the top, press Exchange Now, and send USDE on TON to the one-time deposit address on your order page. After the TON network confirms the deposit, the exchange partner sends APEPE on Polygon PoS to your address. No account or email is needed.
How much APEPE do I get for 1 USDE?
Type 1 into the USDE to APEPE calculator on this page for a live estimate after fees. No figure is written here, because the rate floats and a number in the text would soon be out of date.
How long does USDE to APEPE take?
There is no set time: the TON network confirms the deposit first, then the exchange partner swaps it and sends the APEPE payout. The timing section on this page lists each stage, and the order page shows which one you are in.
Is there a minimum amount for USDE to APEPE?
Yes, every pair has a minimum, and it moves with network conditions. The swap form warns you when your amount is under the current one. A deposit below it cannot be swapped, and getting those coins back is not assured.
Can I swap Ethena USDe to Ape and Pepe without KYC?
You need no account, and xswap.to asks for no ID. In rare cases the exchange partner's automated anti-money-laundering screening pauses a flagged swap and asks for verification, and the order then shows the status verifying. If that happens, message @xswap_to on Telegram with your transaction ID.
Do I need a memo or tag to swap USDE to APEPE?
For the deposit, only if the order page shows a memo next to the deposit address: your USDE must then carry it to be matched to your order.
Why is the APEPE I received different from the estimate?
The rate floats, so the market can move between the estimate and the moment your deposit confirms. A different deposit amount changes the payout too: if your wallet took its network fee out of the amount, less USDE arrived than you entered.
How do I swap APEPE back to USDE?
Use the APEPE to USDE page, linked next to the swap form. It works the same way in reverse: paste a TON address, then send APEPE to the one-time deposit address.
About these numbers
The calculator and the swap form ask for a live estimate for the amount you type; if one fails to load, try again a few seconds later.