Exchange Currencies Track Order Guides Telegram bot

Swap Ethena USDe (USDE) to JOE with no sign-up

Enter the USDE amount, paste an Avalanche C-Chain address from your own wallet, then send USDE on TON to the one-time deposit address on your order page. Once the TON network has confirmed the deposit, the exchange partner swaps it at the floating rate and sends JOE on the Avalanche C-Chain straight to your address.

Swap JOE to USDE instead

Network Fee
-
Deposit Fee
-

Enter an address on the Avalanche C-Chain (ARC-20) network. Coins sent to an address on another network can be lost.

Swap in Telegram

No Account Needed to Start

Swap without creating an account or uploading ID. xswap.to never asks for your seed phrase or private keys, and the exchanged coins go straight to your wallet. In rare cases the exchange partner's compliance check can pause a swap and ask for verification.

Updated Written and checked by the xswap.to team

USDE to JOE exchange rate

The USDE to JOE rate on this page is an estimate for a real swap after fees, so it reads a little lower than the ratio of the two market prices. It floats with the market until your deposit confirms. Type any amount into the calculator below for a live figure.

USDE to JOE Calculator

Enter an amount to see about how much you would receive. The estimate uses the live floating rate and already includes the payout network fee.

USDE TON Jetton
You get (estimate)
JOE Avalanche ARC-20
0
Rate
-
Network Fee
-
Live Market Snapshot Updated Nov 22, 2026 18:45 UTC
1 USDE price
$0.7157

How to swap USDE to JOE

  1. Copy your JOE address

    Open your wallet's C-Chain account, not its X-Chain or P-Chain one, and copy the 0x address from its receive screen. Paste it into Recipient Address and compare the first and last characters.

  2. Enter the USDE amount

    Type it in the form at the top. If it is under the pair's minimum, the form shows that minimum and one tap fills it in. The JOE estimate under it already has the payout fee taken out.

  3. Send USDE to the deposit address

    Press Exchange Now. Your order page shows a one-time TON deposit address: send the amount you entered in one transaction. Send from any TON wallet; if the order page shows a memo, use one that has a Comment field and enter the memo there.

  4. Follow the order until JOE arrives

    The status moves from waiting to confirming, exchanging, sending and finished. Keep the transaction ID from the order page until the JOE is in your wallet.

What the USDE to JOE swap costs

Two costs come out of the estimate before you see it: the exchange margin and the Avalanche C-Chain network fee for your payout. The fee for your TON deposit is paid in Gram (TON), by your wallet or, in apps with gasless transfers, by a relay service; validators set fee levels in the network configuration, so there is no higher rate to choose. A Jetton transfer such as USDE also attaches Gram (TON) to pay the token contracts, including opening the receiver's Jetton wallet if it has none; the unused part normally comes back to you.

The payout fee is a flat amount per payout, so it takes a larger share of a small swap, and the JOE you get per USDE drops near the minimum.

USDE to JOE at a glance

From live exchange data, refreshed hourly.

Item You send You receive
Asset Ethena USDe (Ton) (USDE) JOE
Network TON Avalanche C-Chain
Type Jetton token ARC-20 token
Contract EQAIb6Km…2dzP5f 0x6e84a6…bC0fDd
Memo / tag Include the memo shown on your order page Not needed
Route Cross-chain: TON to Avalanche C-Chain
Rate Floating, estimate shown before you send
Minimum to send (typical, checked Nov 22, 2026) 0.201437 USDE
Account / ID Not needed to start a swap

How long the USDE to JOE swap takes

The USDE to JOE swap is three waits in a row: the TON network confirms your deposit, the exchange partner swaps it, and the Avalanche C-Chain network delivers the payout. TON's masterchain produces a block about every 400 milliseconds, and the exchange partner swaps after your deposit has the confirmations it requires. In rare cases the partner's compliance check pauses an order, which adds time. The stages in order:

  1. Deposit sent and seen

    Your wallet broadcasts the USDE, and the order page moves from waiting to confirming once the deposit is found.

  2. Masterchain block makes it final

    A TON transaction cannot be reversed once a masterchain block includes it, which takes about a second when the network runs normally.

  3. Exchange and JOE payout

    The partner swaps the USDE and sends JOE. The status reaches sending, then finished, and the payout hash appears on the order page.

  4. Payout final on the C-Chain

    The block is final as soon as consensus accepts it, and your wallet shows the payout once the node has executed it.

Your JOE address for the payout

C-Chain addresses use the Ethereum format: 0x followed by 40 hexadecimal characters, the same address your wallet shows on Ethereum. X-Chain addresses look different (X-avax1 followed by a bech32 string), and P-Chain addresses start with P-avax1. An 0x address cannot receive X-Chain AVAX.

Copy the address from your wallet's receive screen, not from your transaction history, where a scammer's lookalike address can sit next to yours, and compare the first and last characters after pasting. A payout sent to a wrong address cannot be reversed. Mistakes that cost a payout:

  • An exchange deposit address meant for JOE on another network: the 0x address can look the same, but the exchange may not credit a C-Chain payout.
  • A token contract address copied from Snowtrace instead of your own wallet address: tokens sent to a contract that cannot handle them can be lost.
  • A multisig or other smart contract wallet deployed on another network but not on the Avalanche C-Chain, where a payout stays stuck unless the wallet can be recreated there.

Receiving JOE on Avalanche C-Chain: address and memo

Memo or tagNot used on this network.
Block explorerexplorer.avax.network

More about swapping on Avalanche C-Chain

Send USDE on the right network

On the sending side, send USDE only on TON, the network your order page names. USDE sent on another network does not reach the deposit address. USDE exists on more than one network, and each is a separate entry in the coin list. Choose the entry that matches the network your coins are on before you create the order.

After the JOE arrives

The payout is final once Avalanche consensus accepts its block, and accepted blocks are never reorganized. Your wallet shows the new balance after the node has executed that block. You need no AVAX to receive the payout, because the sender pays the gas. Moving the JOE later costs gas paid in AVAX on the C-Chain, so keep some AVAX at that address. If the token does not show in your wallet, add it by its contract address.

If the address belongs to an exchange, check that the exchange credits JOE on the Avalanche C-Chain at that address and what its minimum deposit is; a deposit on a network it does not support may not be credited. To check the payout yourself, open the payout hash from the order page in an Avalanche C-Chain explorer such as Snowtrace.

If your USDE deposit is slow or stuck

A TON transfer runs as a chain of transactions, so success on your wallet's side does not prove the deposit arrived. Open your wallet's transaction in an explorer such as Tonviewer and follow it to the deposit address: a Jetton transfer with too little Gram (TON) attached can fail on the way, and a failed transfer may bounce back to you, minus fees.

If the transfer reached the deposit address but the order still says waiting, check that it carried the memo, if the order page showed one. If your wallet reports the transfer as expired or failed and the explorer shows nothing leaving your wallet, no coins were sent, and the wallet can sign a new transfer.

Never send the deposit a second time to speed things up: a second payment is a second deposit. If the order page has not moved on after your deposit confirmed, message @xswap_to on Telegram with the Ref. ID from the order page and your deposit hash.

What others can see of your USDE to JOE swap

Your deposit is public on TON: the sending wallet, the deposit address, the amount and any plain text comment, the memo included, can be read by anyone in an explorer. The payout, its amount and your 0x address are public on Snowtrace, and so is everything that address does later on the C-Chain. The exchange partner that processes the swap sees both sides: your deposit and your payout address.

Before you send

  • Leave some Gram (TON) in the wallet after the amount you send, because every TON transfer, Jetton transfers included, pays its fees in Gram (TON).
  • Copy your JOE address from the wallet's receive screen and compare its start and end after pasting.
  • If the order page shows a memo with the deposit address, add it when you send USDE, or the deposit cannot be matched.
  • Send the amount you entered in one transaction, and let your wallet add its network fee on top.
  • Bookmark the order page and save its Ref. ID, because the Track Order list is stored only in this browser.

USDE to JOE Frequently Asked Questions

How do I swap USDE to JOE?

Enter the USDE amount and your JOE address in the form at the top, press Exchange Now, and send USDE on TON to the one-time deposit address on your order page. After the TON network confirms the deposit, the exchange partner sends JOE on the Avalanche C-Chain to your address. No account or email is needed.

How much JOE do I get for 1 USDE?

Type 1 into the USDE to JOE calculator on this page for a live estimate after fees. No figure is written here, because the rate floats and a number in the text would soon be out of date.

How long does USDE to JOE take?

There is no set time: the TON network confirms the deposit first, then the exchange partner swaps it and sends the JOE payout. The timing section on this page lists each stage, and the order page shows which one you are in.

Is there a minimum amount for USDE to JOE?

Yes, every pair has a minimum, and it moves with network conditions. The facts table on this page lists the last checked figure. The swap form warns you when your amount is under the current one. A deposit below it cannot be swapped, and getting those coins back is not assured.

Can I swap Ethena USDe to JOE without KYC?

You need no account, and xswap.to asks for no ID. In rare cases the exchange partner's automated anti-money-laundering screening pauses a flagged swap and asks for verification, and the order then shows the status verifying. If that happens, message @xswap_to on Telegram with your transaction ID.

Do I need a memo or tag to swap USDE to JOE?

For the deposit, only if the order page shows a memo next to the deposit address: your USDE must then carry it to be matched to your order.

Why is the JOE I received different from the estimate?

The rate floats, so the market can move between the estimate and the moment your deposit confirms. A different deposit amount changes the payout too: if your wallet took its network fee out of the amount, less USDE arrived than you entered.

How do I swap JOE back to USDE?

Use the JOE to USDE page, linked next to the swap form. It works the same way in reverse: paste a TON address, then send JOE to the one-time deposit address.

About these numbers

The calculator and the swap form ask for a live estimate for the amount you type; if one fails to load, try again a few seconds later.

Guides for this swap

Related swaps

Popular swaps