Exchange Currencies Track Order Guides Telegram bot

Swap Wrapped Bitcoin (WBTC) to Hedera Hashgraph (HBAR) with no sign-up

Enter the WBTC amount, paste your Hedera account ID from your own wallet, then send WBTC on Arbitrum One to the one-time deposit address on your order page. Once the Arbitrum One network has confirmed the deposit, the exchange partner swaps it at the floating rate and sends HBAR straight to your address.

Swap HBAR to WBTC instead

Rate
1 WBTC ≈ 1,117,491.4096 HBAR
Network Fee
-
Deposit Fee
-

Enter an address on the Hedera network. Coins sent to an address on another network can be lost.

This coin requires a memo/tag. Funds sent without it may be lost.

Swap in Telegram

No Account Needed to Start

Swap without creating an account or uploading ID. xswap.to never asks for your seed phrase or private keys, and the exchanged coins go straight to your wallet. In rare cases the exchange partner's compliance check can pause a swap and ask for verification.

Updated Written and checked by the xswap.to team

WBTC to HBAR exchange rate

The WBTC to HBAR rate on this page is an estimate for a real swap after fees, so it reads a little lower than the ratio of the two market prices. It floats with the market until your deposit confirms.

Type any amount into the calculator below for a live figure. The table under it shows what several WBTC amounts come to in HBAR after fees. It is worked out from the page's latest quote and carries that quote's time. The daily table tracks the market rate between the two coins on each recent day, before swap fees, from xswap.to's own price record.

WBTC to HBAR Calculator

Enter an amount to see about how much you would receive. The estimate uses the live floating rate and already includes the payout network fee.

WBTC Arbitrum ERC-20
You get (estimate)
HBAR Hedera
1,117,491.4095583 HBAR
Rate
1 WBTC ≈ 1,117,491 HBAR
Value in USD
≈ $60,911.18
Network Fee
0.02 HBAR

WBTC to HBAR conversion table

Estimates after fees, worked out from one live quote taken at . The rate floats: the calculator and the swap form show the live figure.
You sendYou get (estimate after fees)
0.001 WBTC≈ 1,117.02 HBAR
0.005 WBTC≈ 5,586.99 HBAR
0.01 WBTC≈ 11,174.5 HBAR
0.05 WBTC≈ 55,874.1 HBAR
0.1 WBTC≈ 111,749 HBAR
0.5 WBTC≈ 558,745 HBAR

WBTC to HBAR daily rate

Market rate before swap fees, from xswap.to's own daily price record, Nov 16, 2026 to Nov 20, 2026.

Highest1,154,781 HBAR
Lowest1,100,698 HBAR
Change, 4 days+4.91%
DateRate
1 WBTC ≈ 1,154,781 HBAR
1 WBTC ≈ 1,143,749 HBAR
1 WBTC ≈ 1,112,686 HBAR
1 WBTC ≈ 1,131,966 HBAR
1 WBTC ≈ 1,100,698 HBAR
Live Market Snapshot Updated Nov 20, 2026 02:14 UTC
1 WBTC price
$63,249.11
1 HBAR price
$0.0545
1 WBTC buys
1117491.4095583 HBAR

How to swap WBTC to HBAR

  1. Copy your HBAR address

    Open your Hedera wallet and copy your account ID, which starts with 0.0, from an account that already exists on the network. Paste it into Recipient Address and compare the first and last characters. If the address comes from an exchange, also enter the memo it shows with the address.

  2. Enter the WBTC amount

    Type it in the form at the top. If it is under the pair's minimum, the form shows that minimum and one tap fills it in. The HBAR estimate under it already has the payout fee taken out.

  3. Send WBTC to the deposit address

    Press Exchange Now. Your order page shows a one-time Arbitrum One deposit address: send the amount you entered in one transaction. Send from a wallet switched to Arbitrum One that holds some ETH there for gas, and check the network name on the confirmation screen before you approve.

  4. Follow the order until HBAR arrives

    The status moves from waiting to confirming, exchanging, sending and finished. Keep the transaction ID from the order page until the HBAR is in your wallet.

What the WBTC to HBAR swap costs

Two costs come out of the estimate before you see it: the exchange margin and the Hedera network fee for your payout. You pay the Arbitrum One network fee yourself, and the network charges it in ETH, for ETH and tokens alike. Your wallet shows one fee that covers the work on Arbitrum and a share of posting the data to Ethereum. Sending WBTC on Arbitrum One still costs gas, charged in ETH on Arbitrum One, so most wallets need some ETH there as well as the WBTC.

The payout fee is a flat amount per payout, so it takes a larger share of a small swap, and the HBAR you get per WBTC drops near the minimum. The facts table below lists the typical network fees and the minimum with the date they were checked.

WBTC to HBAR at a glance

From live exchange data, refreshed hourly.

Item You send You receive
Asset Wrapped Bitcoin (Arbitrum One) (WBTC) Hedera Hashgraph (HBAR)
Network Arbitrum One Hedera
Type ERC-20 token Native coin
Contract 0x2f2a25…fC5B0f -
Memo / tag Not needed Required with your address
Network fee (typical, checked Nov 19, 2026) ≈ 0.0000004 WBTC ≈ 0.02 HBAR
Route Cross-chain: Arbitrum One to Hedera
Rate Floating, estimate shown before you send
Minimum to send (typical, checked Nov 20, 2026) 0.000001 WBTC
Account / ID Not needed to start a swap

How long the WBTC to HBAR swap takes

The WBTC to HBAR swap is three waits in a row: the Arbitrum One network confirms your deposit, the exchange partner swaps it, and the Hedera network delivers the payout. Arbitrum One's sequencer, which orders transactions, confirms your deposit provisionally once it puts it in a block. The deposit is final when the batch holding it is posted to Ethereum and final there, and the exchange partner swaps after the confirmations it requires. In rare cases the partner's compliance check pauses an order, which adds time. The stages in order:

  1. Deposit sent and seen

    Your wallet broadcasts the WBTC, and the order page moves from waiting to confirming once the deposit is found.

  2. Arbitrum One sequences the deposit

    The sequencer puts it in a block or, if it cannot do so in time, drops it rather than leaving it pending.

  3. Exchange and HBAR payout

    The partner swaps the WBTC and sends HBAR. The status reaches sending, then finished, and the payout hash appears on the order page.

  4. Payout final on Hedera

    Your wallet shows the HBAR once the transfer reaches consensus, within seconds of being sent, and the result cannot change afterwards.

Your HBAR address for the payout

A Hedera account ID is three numbers joined by dots, and on mainnet it starts with 0.0, as in 0.0.123. The swap form accepted the plain ID but rejected the same ID with a checksum (0.0.123-vfmkw) and an 0x EVM address.

Copy the address from your wallet's receive screen, not from your transaction history, where a scammer's lookalike address can sit next to yours, and compare the first and last characters after pasting. A payout sent to a wrong address cannot be reversed. HBAR can also carry a memo. If your address comes from an exchange, enter the memo it gives you, because the exchange uses it to credit your account; a wallet you control usually needs none. Mistakes that cost a payout:

  • Leaving out an exchange's memo: the HBAR still lands in the exchange's account, but nothing tells the exchange which customer to credit.
  • An account with receiver signature required turned on: Hedera then needs your signature on every transfer into it, so the payout fails.
  • A mistyped account ID: the form takes it without a checksum, so a wrong digit can name another existing account, and the transfer cannot be undone.

Receiving HBAR on Hedera: address and memo

Memo or tagNeeded when the receiving wallet asks for one, which exchange accounts usually do. Enter it in the memo field of the form.
Block explorerhashscan.io

Send WBTC on the right network

On the sending side, send WBTC only on Arbitrum One, the network your order page names. WBTC sent on another network does not reach the deposit address. WBTC exists on more than one network, and each is a separate entry in the coin list. Choose the entry that matches the network your coins are on before you create the order.

After the HBAR arrives

The payout is a Hedera transfer to your account ID. It reaches consensus within seconds, and from then on it is final and part of your balance. Moving the HBAR later costs a transaction fee in HBAR, charged to the paying account, so keep some HBAR in the account.

If the account ID belongs to an exchange, copy the account ID and any memo from its HBAR deposit page for the Hedera network, and check its minimum deposit. To check the payout yourself, open the payout hash from the order page in a Hedera explorer such as hashscan.io.

If your WBTC deposit is slow or stuck

Look up the transaction hash on Arbiscan first. If Arbiscan has no record of it, check which network your wallet sent on: the same 0x address exists on Ethereum, Arbitrum Nova and other EVM networks, but the order waits for a transfer on Arbitrum One only. Most wallets work on one network at a time, so the wrong one is easy to pick.

Arbitrum One keeps no long pending pool: the sequencer holds a transaction for seconds, then puts it in a block or drops it, for example when the base fee has risen above the maximum fee your wallet set. A dropped transaction never runs, so nothing leaves your wallet. If the wallet still lists it as pending, its speed up option, where offered, sends it again with the same nonce, so only one copy can go through; ask support before you make a new transfer.

Never send the deposit a second time to speed things up: a second payment is a second deposit. If the order page has not moved on after your deposit confirmed, message @xswap_to on Telegram with the Ref. ID from the order page and your deposit hash.

What others can see of your WBTC to HBAR swap

Your deposit is public: the amount, your sending address and the deposit address show on Arbiscan, and the transaction data is also posted to Ethereum. The payout, its amount, your account ID and any memo are visible to anyone on hashscan.io, and mirror nodes keep the record. The exchange partner that processes the swap sees both sides: your deposit and your payout address.

Before you send

  • Switch your wallet to Arbitrum One and keep some ETH there for gas before you send, even when the deposit is a token.
  • Copy your HBAR address from the wallet's receive screen and compare its start and end after pasting.
  • Enter the memo your exchange gives you for HBAR, or the payout cannot be credited to your account.
  • Send the amount you entered in one transaction, and let your wallet add its network fee on top.
  • Bookmark the order page and save its Ref. ID, because the Track Order list is stored only in this browser.

WBTC to HBAR Frequently Asked Questions

How do I swap WBTC to HBAR?

Enter the WBTC amount and your HBAR address in the form at the top, press Exchange Now, and send WBTC on Arbitrum One to the one-time deposit address on your order page. After the Arbitrum One network confirms the deposit, the exchange partner sends HBAR to your address. No account or email is needed.

How much HBAR do I get for 1 WBTC?

The amount table in the rate section shows it for several sizes, as an estimate after fees with the time of the quote. For your own amount, the WBTC to HBAR calculator asks for a live estimate. No figure is written here, because the rate floats.

How long does WBTC to HBAR take?

There is no set time: the Arbitrum One network confirms the deposit first, then the exchange partner swaps it and sends the HBAR payout. The timing section on this page lists each stage, and the order page shows which one you are in.

Is there a minimum amount for WBTC to HBAR?

Yes, every pair has a minimum, and it moves with network conditions. The facts table on this page lists the last checked figure. The swap form warns you when your amount is under the current one. A deposit below it cannot be swapped, and getting those coins back is not assured.

Can I swap Wrapped Bitcoin to Hedera Hashgraph without KYC?

You need no account, and xswap.to asks for no ID. In rare cases the exchange partner's automated anti-money-laundering screening pauses a flagged swap and asks for verification, and the order then shows the status verifying. If that happens, message @xswap_to on Telegram with your transaction ID.

Do I need a memo or tag to swap WBTC to HBAR?

For the payout, only if your HBAR address belongs to an exchange: enter the memo it shows with the address. A wallet you control usually needs none.

Why is the HBAR I received different from the estimate?

The rate floats, so the market can move between the estimate and the moment your deposit confirms. A different deposit amount changes the payout too: if your wallet took its network fee out of the amount, less WBTC arrived than you entered.

How do I swap HBAR back to WBTC?

Use the HBAR to WBTC page, linked next to the swap form. It works the same way in reverse: paste an Arbitrum One address, then send HBAR to the one-time deposit address.

About these numbers

The calculator and the swap form ask for a live estimate for the amount you type; if one fails to load, try again a few seconds later. The amount table is worked out from the page's latest quote and the network fees in it, so treat it as a guide and use the calculator for your own amount. The daily rates come from xswap.to's own price record, one value per day, and show the market rate before swap fees. Fees and the minimum in the facts table are typical figures with their check date.

Guides for this swap

Related swaps

Popular swaps