Exchange Currencies Track Order Guides Telegram bot

Swap Wrapped Bitcoin (WBTC) to Aethir (ATH) with no sign-up

Enter the WBTC amount, paste an Ethereum address from your own wallet, then send WBTC on Polygon PoS to the one-time deposit address on your order page. Once the Polygon PoS network has confirmed the deposit, the exchange partner swaps it at the floating rate and sends ATH on Ethereum straight to your address.

Swap ATH to WBTC instead

Rate
1 WBTC ≈ 10,030,445.3135 ATH
Network Fee
-
Deposit Fee
-

Enter an address on the Ethereum (ERC-20) network. Coins sent to an address on another network can be lost.

Swap in Telegram

No Account Needed to Start

Swap without creating an account or uploading ID. xswap.to never asks for your seed phrase or private keys, and the exchanged coins go straight to your wallet. In rare cases the exchange partner's compliance check can pause a swap and ask for verification.

Updated Written and checked by the xswap.to team

WBTC to ATH exchange rate

The WBTC to ATH rate on this page is an estimate for a real swap after fees, so it reads a little lower than the ratio of the two market prices. It floats with the market until your deposit confirms.

Type any amount into the calculator below for a live figure. The table under it shows what several WBTC amounts come to in ATH after fees. It is worked out from the page's latest quote and carries that quote's time. The daily table tracks the market rate between the two coins on each recent day, before swap fees, from xswap.to's own price record.

WBTC to ATH Calculator

Enter an amount to see about how much you would receive. The estimate uses the live floating rate and already includes the payout network fee.

WBTC Polygon ERC-20
You get (estimate)
ATH Ethereum ERC-20
10,030,445.3135075 ATH
Rate
1 WBTC ≈ 10,030,445 ATH
Value in USD
≈ $39,958.65
Network Fee
15.6569207 ATH

WBTC to ATH conversion table

Estimates after fees, worked out from one live quote taken at . The rate floats: the calculator and the swap form show the live figure.
You sendYou get (estimate after fees)
0.001 WBTC≈ 10,014.8 ATH
0.005 WBTC≈ 50,136.6 ATH
0.01 WBTC≈ 100,289 ATH
0.05 WBTC≈ 501,507 ATH
0.1 WBTC≈ 1,003,030 ATH
0.5 WBTC≈ 5,015,215 ATH

WBTC to ATH daily rate

Market rate before swap fees, from xswap.to's own daily price record, Nov 16, 2026 to Nov 20, 2026.

Highest16,024,149 ATH
Lowest15,211,355 ATH
Change, 4 days−2.49%
DateRate
1 WBTC ≈ 15,625,639 ATH
1 WBTC ≈ 15,811,520 ATH
1 WBTC ≈ 15,211,355 ATH
1 WBTC ≈ 15,719,363 ATH
1 WBTC ≈ 16,024,149 ATH
Live Market Snapshot Updated Nov 20, 2026 02:12 UTC
1 WBTC price
$63,281.53
1 ATH price
$0.00398374
1 WBTC buys
10030445.3135075 ATH

How to swap WBTC to ATH

  1. Copy your ATH address

    Open your wallet with Ethereum mainnet selected and copy your 0x address from its receive screen; ETH and every ERC-20 token use that one address. Paste it into Recipient Address and compare the first and last characters.

  2. Enter the WBTC amount

    Type it in the form at the top. If it is under the pair's minimum, the form shows that minimum and one tap fills it in. The ATH estimate under it already has the payout fee taken out.

  3. Send WBTC to the deposit address

    Press Exchange Now. Your order page shows a one-time Polygon PoS deposit address: send the amount you entered in one transaction. Send from a wallet set to Polygon PoS that holds enough POL for gas; some wallets still label that balance MATIC.

  4. Follow the order until ATH arrives

    The status moves from waiting to confirming, exchanging, sending and finished. Keep the transaction ID from the order page until the ATH is in your wallet.

What the WBTC to ATH swap costs

Two costs come out of the estimate before you see it: the exchange margin and the Ethereum network fee for your payout. You pay the Polygon PoS gas fee yourself, in POL: the gas the transfer uses times the base fee plus a tip, and most wallets suggest both. A token transfer on Polygon PoS runs the token's contract, so it uses more gas than a plain POL transfer, and that gas is paid in POL.

The payout fee is a flat amount per payout, so it takes a larger share of a small swap, and the ATH you get per WBTC drops near the minimum. The facts table below lists the typical network fees and the minimum with the date they were checked.

WBTC to ATH at a glance

From live exchange data, refreshed hourly.

Item You send You receive
Asset Wrapped Bitcoin (Polygon) (WBTC) Aethir (ATH)
Network Polygon PoS Ethereum
Type ERC-20 token ERC-20 token
Contract 0x1BFD67…D9BfD6 0xbe0ed4…c5226b
Memo / tag Not needed Not needed
Network fee (typical, checked Nov 19, 2026) ≈ 0.0000002 WBTC ≈ 15.62 ATH
Route Cross-chain: Polygon PoS to Ethereum
Rate Floating, estimate shown before you send
Minimum to send (typical, checked Nov 20, 2026) 0.0000025 WBTC
Account / ID Not needed to start a swap

How long the WBTC to ATH swap takes

The WBTC to ATH swap is three waits in a row: the Polygon PoS network confirms your deposit, the exchange partner swaps it, and the Ethereum network delivers the payout. Polygon PoS finalizes blocks with milestones once validators holding two thirds of the stake agree, and a finalized block cannot be reorganized; the exchange partner swaps once your deposit has the confirmations it requires. In rare cases the partner's compliance check pauses an order, which adds time. The stages in order:

  1. Deposit sent and seen

    Your wallet broadcasts the WBTC, and the order page moves from waiting to confirming once the deposit is found.

  2. Polygon PoS milestones finalize it

    A deposit whose max fee is below the base fee, or that waits behind an earlier pending transaction, can stay pending until you speed it up.

  3. Exchange and ATH payout

    The partner swaps the WBTC and sends ATH. The status reaches sending, then finished, and the payout hash appears on the order page.

  4. Payout final on Ethereum

    Your wallet shows the payout once it is in a block. About 15 minutes later, two epochs on, Ethereum finalizes that block.

Your ATH address for the payout

An Ethereum address is 0x followed by 40 hexadecimal characters, 42 in total. Mixed-case letters are a checksum (EIP-55), not a different address.

Copy the address from your wallet's receive screen, not from your transaction history, where a scammer's lookalike address can sit next to yours, and compare the first and last characters after pasting. A payout sent to a wrong address cannot be reversed. Mistakes that cost a payout:

  • An exchange deposit address meant for ATH on another network, such as BNB Smart Chain or Base: the exchange may not credit a payout on Ethereum.
  • A token contract address copied from Etherscan instead of your own wallet address: tokens sent to a contract that cannot handle them can be lost.
  • A smart contract wallet such as a Safe, which exists only on networks where it was deployed and can fail to receive ETH from some contracts.

Receiving ATH on Ethereum: address and memo

Memo or tagNot used on this network.
Block exploreretherscan.io

More about swapping on Ethereum

Send WBTC on the right network

On the sending side, send WBTC only on Polygon PoS, the network your order page names. WBTC sent on another network does not reach the deposit address. WBTC exists on more than one network, and each is a separate entry in the coin list. Choose the entry that matches the network your coins are on before you create the order.

After the ATH arrives

The payout shows in your wallet once a block includes it, and you can use it from then on. Ethereum finalizes a block after two epochs of 32 slots, about 15 minutes, and after that only a network attack costing many billions of dollars could change it. You need no ETH to receive the payout, because the sender pays the gas. Moving the ATH later costs gas paid in ETH, so keep some ETH at the same address. If the token does not show in your wallet, add it by its contract address.

If the address belongs to an exchange, check that the exchange credits ATH on Ethereum at that address and what its minimum deposit is; a deposit below the minimum or on a network it does not support may not be credited. To check the payout yourself, open the payout hash from the order page in an Ethereum explorer such as Etherscan.

If your WBTC deposit is slow or stuck

Look up the transaction hash on PolygonScan. A deposit that stays pending usually has a max fee below the current base fee, which every transaction must pay, or a tip too small to be picked. It can also wait behind an earlier pending transaction from your address with a lower nonce. If your wallet offers speed up, use it on the oldest pending one: the wallet resends the same transaction with the same nonce and a higher fee, so only one of the two can confirm.

Do not press cancel on a deposit, because a cancellation that confirms means nothing reaches the order. The sped-up version has a new hash, so give that one to support. If PolygonScan marks the transaction as failed, the coins stayed in your wallet but the gas was spent, so ask support before you send again. Only the exchange can speed up a withdrawal it sent for you.

Never send the deposit a second time to speed things up: a second payment is a second deposit. If the order page has not moved on after your deposit confirmed, message @xswap_to on Telegram with the Ref. ID from the order page and your deposit hash.

What others can see of your WBTC to ATH swap

Your deposit is public on Polygon PoS: your sending address, the deposit address, the amount and the fee show on PolygonScan, and they stay there. The payout, its amount and your 0x address are public on Etherscan, and so is everything that address does later on Ethereum. The exchange partner that processes the swap sees both sides: your deposit and your payout address.

Before you send

  • Keep some POL on Polygon PoS for gas and check which network your wallet is on, since POL also exists as a token on Ethereum.
  • Copy your ATH address from the wallet's receive screen and compare its start and end after pasting.
  • Send the amount you entered in one transaction, and let your wallet add its network fee on top.
  • Bookmark the order page and save its Ref. ID, because the Track Order list is stored only in this browser.

WBTC to ATH Frequently Asked Questions

How do I swap WBTC to ATH?

Enter the WBTC amount and your ATH address in the form at the top, press Exchange Now, and send WBTC on Polygon PoS to the one-time deposit address on your order page. After the Polygon PoS network confirms the deposit, the exchange partner sends ATH on Ethereum to your address. No account or email is needed.

How much ATH do I get for 1 WBTC?

The amount table in the rate section shows it for several sizes, as an estimate after fees with the time of the quote. For your own amount, the WBTC to ATH calculator asks for a live estimate. No figure is written here, because the rate floats.

How long does WBTC to ATH take?

There is no set time: the Polygon PoS network confirms the deposit first, then the exchange partner swaps it and sends the ATH payout. The timing section on this page lists each stage, and the order page shows which one you are in.

Is there a minimum amount for WBTC to ATH?

Yes, every pair has a minimum, and it moves with network conditions. The facts table on this page lists the last checked figure. The swap form warns you when your amount is under the current one. A deposit below it cannot be swapped, and getting those coins back is not assured.

Can I swap Wrapped Bitcoin to Aethir without KYC?

You need no account, and xswap.to asks for no ID. In rare cases the exchange partner's automated anti-money-laundering screening pauses a flagged swap and asks for verification, and the order then shows the status verifying. If that happens, message @xswap_to on Telegram with your transaction ID.

Why is the ATH I received different from the estimate?

The rate floats, so the market can move between the estimate and the moment your deposit confirms. A different deposit amount changes the payout too: if your wallet took its network fee out of the amount, less WBTC arrived than you entered.

How do I swap ATH back to WBTC?

Use the ATH to WBTC page, linked next to the swap form. It works the same way in reverse: paste a Polygon PoS address, then send ATH to the one-time deposit address.

About these numbers

The calculator and the swap form ask for a live estimate for the amount you type; if one fails to load, try again a few seconds later. The amount table is worked out from the page's latest quote and the network fees in it, so treat it as a guide and use the calculator for your own amount. The daily rates come from xswap.to's own price record, one value per day, and show the market rate before swap fees. Fees and the minimum in the facts table are typical figures with their check date.

Guides for this swap

Related swaps

Popular swaps