Swap Wrapped Bitcoin (WBTC) to Stellar (XLM) with no sign-up
Enter the WBTC amount, paste a Stellar G address from your own wallet, then send WBTC on Polygon PoS to the one-time deposit address on your order page. Once the Polygon PoS network has confirmed the deposit, the exchange partner swaps it at the floating rate and sends XLM straight to your address.
Swap without creating an account or uploading ID. xswap.to never asks for your seed phrase or private keys, and the exchanged coins go straight to your wallet. In rare cases the exchange partner's compliance check can pause a swap and ask for verification.
The WBTC to XLM rate on this page is an estimate for a real swap after fees, so it reads a little lower than the ratio of the two market prices. It floats with the market until your deposit confirms.
Type any amount into the calculator below for a live figure. The table under it shows what several WBTC amounts come to in XLM after fees. It is worked out from the page's latest quote and carries that quote's time. The daily table tracks the market rate between the two coins on each recent day, before swap fees, from xswap.to's own price record.
WBTC to XLM Calculator
Enter an amount to see about how much you would receive. The estimate uses the live floating rate and already includes the payout network fee.
WBTCPolygonERC-20
You get (estimate)
XLMStellar
Rate
1 WBTC ≈ 427,702 XLM
Value in USD
≈ $57,980.09
Network Fee
0.02 XLM
WBTC to XLM conversion table
Estimates after fees, worked out from one live quote taken at . The rate floats: the calculator and the swap form show the live figure.
Market rate before swap fees, from xswap.to's own daily price record, Nov 16, 2026 to Nov 20, 2026.
Highest470,507 XLM
Lowest449,908 XLM
Change, 4 days−0.60%
Date
Rate
1 WBTC ≈ 459,683 XLM
1 WBTC ≈ 458,191 XLM
1 WBTC ≈ 449,908 XLM
1 WBTC ≈ 470,507 XLM
1 WBTC ≈ 462,475 XLM
Live Market SnapshotUpdated Nov 20, 2026 02:14 UTC
1 WBTC price
$63,281.53
1 XLM price
$0.1356
1 WBTC buys
427701.9229754 XLM
How to swap WBTC to XLM
1
Copy your XLM address
Open your Stellar wallet's receive screen and copy the account address that starts with G, from an account that already holds XLM. Paste it into Recipient Address and compare the first and last characters. If the address comes from an exchange, also enter the memo it shows with the address.
2
Enter the WBTC amount
Type it in the form at the top. If it is under the pair's minimum, the form shows that minimum and one tap fills it in. The XLM estimate under it already has the payout fee taken out.
3
Send WBTC to the deposit address
Press Exchange Now. Your order page shows a one-time Polygon PoS deposit address: send the amount you entered in one transaction. Send from a wallet set to Polygon PoS that holds enough POL for gas; some wallets still label that balance MATIC.
4
Follow the order until XLM arrives
The status moves from waiting to confirming, exchanging, sending and finished. Keep the transaction ID from the order page until the XLM is in your wallet.
What the WBTC to XLM swap costs
Two costs come out of the estimate before you see it: the exchange margin and the Stellar network fee for your payout. You pay the Polygon PoS gas fee yourself, in POL: the gas the transfer uses times the base fee plus a tip, and most wallets suggest both. A token transfer on Polygon PoS runs the token's contract, so it uses more gas than a plain POL transfer, and that gas is paid in POL.
The payout fee is a flat amount per payout, so it takes a larger share of a small swap, and the XLM you get per WBTC drops near the minimum. The facts table below lists the typical network fees and the minimum with the date they were checked.
WBTC to XLM at a glance
From live exchange data, refreshed hourly.
Item
You send
You receive
Asset
Wrapped Bitcoin (Polygon) (WBTC)
Stellar (XLM)
Network
Polygon PoS
Stellar
Type
ERC-20 token
Native coin
Contract
0x1BFD67…D9BfD6
-
Memo / tag
Not needed
Required with your address
Network fee (typical, checked Nov 19, 2026)
≈ 0.0000002 WBTC
≈ 0.02 XLM
Route
Cross-chain: Polygon PoS to Stellar
Rate
Floating, estimate shown before you send
Minimum to send (typical, checked Nov 20, 2026)
0.0000028 WBTC
Account / ID
Not needed to start a swap
How long the WBTC to XLM swap takes
The WBTC to XLM swap is three waits in a row: the Polygon PoS network confirms your deposit, the exchange partner swaps it, and the Stellar network delivers the payout. Polygon PoS finalizes blocks with milestones once validators holding two thirds of the stake agree, and a finalized block cannot be reorganized; the exchange partner swaps once your deposit has the confirmations it requires. In rare cases the partner's compliance check pauses an order, which adds time. The stages in order:
1Deposit sent and seen
Your wallet broadcasts the WBTC, and the order page moves from waiting to confirming once the deposit is found.
2Polygon PoS milestones finalize it
A deposit whose max fee is below the base fee, or that waits behind an earlier pending transaction, can stay pending until you speed it up.
3Exchange and XLM payout
The partner swaps the WBTC and sends XLM. The status reaches sending, then finished, and the payout hash appears on the order page.
4Payout in a closed ledger
Your wallet shows the XLM once the ledger with the payout closes, usually a few seconds after it is sent, and the payment is final from then on.
Your XLM address for the payout
A Stellar account address starts with G and is 56 characters of capital letters and the digits 2 to 7. The swap form rejected a muxed address (starts with M, 69 characters) and a contract address (starts with C), so paste the G address and enter any memo separately.
Copy the address from your wallet's receive screen, not from your transaction history, where a scammer's lookalike address can sit next to yours, and compare the first and last characters after pasting. A payout sent to a wrong address cannot be reversed. XLM can also carry a memo. If your address comes from an exchange, enter the memo it gives you, because the exchange uses it to credit your account; a wallet you control usually needs none. Mistakes that cost a payout:
Leaving out the memo of an exchange account: exchanges keep many customers in one Stellar account, and a payment without its memo can be lost or need manual tracing.
A new G address that holds no XLM yet: it is not an account until someone funds it, and a plain payment to it fails.
Receiving XLM on Stellar: address and memo
Memo or tag
Needed when the receiving wallet asks for one, which exchange accounts usually do. Enter it in the memo field of the form.
On the sending side, send WBTC only on Polygon PoS, the network your order page names. WBTC sent on another network does not reach the deposit address. WBTC exists on more than one network, and each is a separate entry in the coin list. Choose the entry that matches the network your coins are on before you create the order.
The payout is a Stellar payment, and it is final once the ledger that includes it closes, usually a few seconds after it is sent. Every Stellar account must keep a minimum balance in XLM, two base reserves plus more for each trustline or other entry it holds, and that part of the balance cannot be spent. Validators can vote to change the base reserve. Each later transaction also costs a small fee in XLM.
If the address belongs to an exchange, copy its G address and memo exactly as its Stellar deposit page shows them, and check its minimum deposit; exchanges that pool deposits in one account credit you by the memo. To check the payout yourself, open the payout hash from the order page in a Stellar explorer such as stellar.expert.
If your WBTC deposit is slow or stuck
Look up the transaction hash on PolygonScan. A deposit that stays pending usually has a max fee below the current base fee, which every transaction must pay, or a tip too small to be picked. It can also wait behind an earlier pending transaction from your address with a lower nonce. If your wallet offers speed up, use it on the oldest pending one: the wallet resends the same transaction with the same nonce and a higher fee, so only one of the two can confirm.
Do not press cancel on a deposit, because a cancellation that confirms means nothing reaches the order. The sped-up version has a new hash, so give that one to support. If PolygonScan marks the transaction as failed, the coins stayed in your wallet but the gas was spent, so ask support before you send again. Only the exchange can speed up a withdrawal it sent for you.
Never send the deposit a second time to speed things up: a second payment is a second deposit. If the order page has not moved on after your deposit confirmed, message @xswap_to on Telegram with the Ref. ID from the order page and your deposit hash.
What others can see of your WBTC to XLM swap
Your deposit is public on Polygon PoS: your sending address, the deposit address, the amount and the fee show on PolygonScan, and they stay there. The payout, its amount, your G address and any memo are visible to anyone on a Stellar explorer such as stellar.expert, and they stay in the ledger's history. The exchange partner that processes the swap sees both sides: your deposit and your payout address.
Before you send
Keep some POL on Polygon PoS for gas and check which network your wallet is on, since POL also exists as a token on Ethereum.
Copy your XLM address from the wallet's receive screen and compare its start and end after pasting.
Enter the memo your exchange gives you for XLM, or the payout cannot be credited to your account.
Send the amount you entered in one transaction, and let your wallet add its network fee on top.
Bookmark the order page and save its Ref. ID, because the Track Order list is stored only in this browser.
WBTC to XLM Frequently Asked Questions
How do I swap WBTC to XLM?
Enter the WBTC amount and your XLM address in the form at the top, press Exchange Now, and send WBTC on Polygon PoS to the one-time deposit address on your order page. After the Polygon PoS network confirms the deposit, the exchange partner sends XLM to your address. No account or email is needed.
How much XLM do I get for 1 WBTC?
The amount table in the rate section shows it for several sizes, as an estimate after fees with the time of the quote. For your own amount, the WBTC to XLM calculator asks for a live estimate. No figure is written here, because the rate floats.
How long does WBTC to XLM take?
There is no set time: the Polygon PoS network confirms the deposit first, then the exchange partner swaps it and sends the XLM payout. The timing section on this page lists each stage, and the order page shows which one you are in.
Is there a minimum amount for WBTC to XLM?
Yes, every pair has a minimum, and it moves with network conditions. The facts table on this page lists the last checked figure. The swap form warns you when your amount is under the current one. A deposit below it cannot be swapped, and getting those coins back is not assured.
Can I swap Wrapped Bitcoin to Stellar without KYC?
You need no account, and xswap.to asks for no ID. In rare cases the exchange partner's automated anti-money-laundering screening pauses a flagged swap and asks for verification, and the order then shows the status verifying. If that happens, message @xswap_to on Telegram with your transaction ID.
Do I need a memo or tag to swap WBTC to XLM?
For the payout, only if your XLM address belongs to an exchange: enter the memo it shows with the address. A wallet you control usually needs none.
Why is the XLM I received different from the estimate?
The rate floats, so the market can move between the estimate and the moment your deposit confirms. A different deposit amount changes the payout too: if your wallet took its network fee out of the amount, less WBTC arrived than you entered.
How do I swap XLM back to WBTC?
Use the XLM to WBTC page, linked next to the swap form. It works the same way in reverse: paste a Polygon PoS address, then send XLM to the one-time deposit address.
About these numbers
The calculator and the swap form ask for a live estimate for the amount you type; if one fails to load, try again a few seconds later. The amount table is worked out from the page's latest quote and the network fees in it, so treat it as a guide and use the calculator for your own amount. The daily rates come from xswap.to's own price record, one value per day, and show the market rate before swap fees. Fees and the minimum in the facts table are typical figures with their check date.