Swap Monero (XMR) to Pulsechain (PLS) with no sign-up
Enter the XMR amount, paste your PulseChain address from your own wallet, then send XMR to the one-time deposit address on your order page. Once the Monero network has confirmed the deposit, the exchange partner swaps it at the floating rate and sends PLS on PulseChain straight to your address.
Swap without creating an account or uploading ID. xswap.to never asks for your seed phrase or private keys, and the exchanged coins go straight to your wallet. In rare cases the exchange partner's compliance check can pause a swap and ask for verification.
The XMR to PLS rate on this page is an estimate for a real swap after fees, so it reads a little lower than the ratio of the two market prices. It floats with the market until your deposit confirms. Type any amount into the calculator below for a live figure.
XMR to PLS Calculator
Enter an amount to see about how much you would receive. The estimate uses the live floating rate and already includes the payout network fee.
XMRMonero
You get (estimate)
PLSPulseChain
Rate
-
Value in USD
-
Network Fee
-
Live Market SnapshotUpdated Nov 22, 2026 07:57 UTC
1 XMR price
$498.75
How to swap XMR to PLS
1
Copy your PLS address
Open your wallet's receive screen for PLS on PulseChain and copy the address it shows, after checking that the wallet names the same network. Paste it into Recipient Address and compare the first and last characters.
2
Enter the XMR amount
Type it in the form at the top. If it is under the pair's minimum, the form shows that minimum and one tap fills it in. The PLS estimate under it already has the payout fee taken out.
3
Send XMR to the deposit address
Press Exchange Now. Your order page shows a one-time Monero deposit address: send the amount you entered in one transaction. Send from a fully synced Monero wallet and type the amount yourself instead of using the All or Max button, which takes the fee out of the amount.
4
Follow the order until PLS arrives
The status moves from waiting to confirming, exchanging, sending and finished. Keep the transaction ID from the order page until the PLS is in your wallet.
What the XMR to PLS swap costs
Two costs come out of the estimate before you see it: the exchange margin and the PulseChain network fee for your payout. Your Monero wallet adds the network fee on top of the amount and works it out for you: fees are dynamic, priced per byte, and higher at a higher priority setting.
The payout fee is a flat amount per payout, so it takes a larger share of a small swap, and the PLS you get per XMR drops near the minimum. The facts table below lists the typical network fees and the minimum with the date they were checked.
XMR to PLS at a glance
From live exchange data, refreshed hourly.
Item
You send
You receive
Asset
Monero (XMR)
Pulsechain (PLS) (PLS)
Network
Monero
PulseChain
Type
Native coin
Native coin
Memo / tag
Not needed
Not needed
Network fee (typical, checked Nov 22, 2026)
≈ 0.006 XMR
-
Route
Cross-chain: Monero to PulseChain
Rate
Floating, estimate shown before you send
Minimum to send (typical, checked Nov 22, 2026)
0.01119 XMR
Account / ID
Not needed to start a swap
How long the XMR to PLS swap takes
The XMR to PLS swap is three waits in a row: the Monero network confirms your deposit, the exchange partner swaps it, and the PulseChain network delivers the payout. Monero targets a block about every two minutes, and the exchange partner swaps after your deposit has the confirmations it requires. In rare cases the partner's compliance check pauses an order, which adds time. The stages in order:
1Deposit sent and seen
Your wallet broadcasts the XMR, and the order page moves from waiting to confirming once the deposit is found.
2Monero confirms the deposit
Your wallet lists the deposit as pending until a miner includes it in a block, and each block after that adds a confirmation.
3Exchange and PLS payout
The partner swaps the XMR and sends PLS. The status reaches sending, then finished, and the payout hash appears on the order page.
4Payout confirmed on PulseChain
Your wallet lists the PLS as received once PulseChain has confirmed the payout.
Your PLS address for the payout
A PulseChain receiving address is 0x followed by 40 hexadecimal characters. The swap form accepted that format in our checks. Copy the address from your wallet's receive screen, not from your transaction history, where a scammer's lookalike address can sit next to yours, and compare the first and last characters after pasting. A payout sent to a wrong address cannot be reversed. Mistakes that cost a payout:
An address for PLS on another network: the same coin on a different network is a separate asset, and a payout sent there can be lost.
An exchange address used without the memo or tag the exchange asks for, which it needs to credit the payout to you.
A token contract address copied from an explorer instead of the address of your own wallet.
The payout is an ordinary PulseChain transaction from the exchange partner to your address. Your wallet shows it once it has seen the transaction, often as pending at first, and counts it as received once the network has confirmed it. If nothing shows, check that the wallet is set to PulseChain and, for a token, that it displays this token.
If the address belongs to an exchange, check that the exchange accepts PLS on PulseChain, what its minimum deposit is and whether it needs a memo or tag; exchanges credit deposits by their own rules. To check the payout yourself, look up the payout hash from the order page in a PulseChain block explorer.
If your XMR deposit is slow or stuck
Look up your transaction ID on a Monero block explorer such as xmrchain.net. If it is still not there after a few minutes, the node your wallet uses probably failed to relay it: broadcast that same transaction again if your wallet offers that, through another node if needed, rather than creating a new one. The network rejects a second spend of the same coins, so this cannot pay twice. If the explorer shows it, wait for a block. If the wallet will not send at all, check its unlocked balance, since newly received coins and the change from your last send stay locked for 10 blocks.
A Monero explorer cannot show who received a payment or how much, so a transaction ID alone does not prove your deposit; the transaction ID, the transaction key and the deposit address together do. In the GUI wallet the key sits behind the P button on the History page; in the CLI, get_tx_key returns it if the wallet stores transaction keys.
Never send the deposit a second time to speed things up: a second payment is a second deposit. If the order page has not moved on after your deposit confirmed, message @xswap_to on Telegram with the Ref. ID from the order page and your deposit hash.
What others can see of your XMR to PLS swap
On the Monero chain, outside observers cannot read your deposit amount or the receiving address, and your real input appears alongside 15 decoys; that a transaction exists, its block and its fee stay public. The payout is recorded on PulseChain too, where its amount and your receiving address are usually visible to anyone with a block explorer. The exchange partner that processes the swap sees both sides: your deposit and your payout address.
Before you send
Wait until your Monero wallet shows the full amount plus the network fee as unlocked before you create the order.
Copy your PLS address from the wallet's receive screen and compare its start and end after pasting.
Send the amount you entered in one transaction, and let your wallet add its network fee on top.
Bookmark the order page and save its Ref. ID, because the Track Order list is stored only in this browser.
XMR to PLS Frequently Asked Questions
How do I swap XMR to PLS?
Enter the XMR amount and your PLS address in the form at the top, press Exchange Now, and send XMR to the one-time deposit address on your order page. After the Monero network confirms the deposit, the exchange partner sends PLS on PulseChain to your address. No account or email is needed.
How much PLS do I get for 1 XMR?
Type 1 into the XMR to PLS calculator on this page for a live estimate after fees. No figure is written here, because the rate floats and a number in the text would soon be out of date.
How long does XMR to PLS take?
There is no set time: the Monero network confirms the deposit first, then the exchange partner swaps it and sends the PLS payout. The timing section on this page lists each stage, and the order page shows which one you are in.
Is there a minimum amount for XMR to PLS?
Yes, every pair has a minimum, and it moves with network conditions. The facts table on this page lists the last checked figure. The swap form warns you when your amount is under the current one. A deposit below it cannot be swapped, and getting those coins back is not assured.
Can I swap Monero to Pulsechain without KYC?
You need no account, and xswap.to asks for no ID. In rare cases the exchange partner's automated anti-money-laundering screening pauses a flagged swap and asks for verification, and the order then shows the status verifying. If that happens, message @xswap_to on Telegram with your transaction ID.
Why is the PLS I received different from the estimate?
The rate floats, so the market can move between the estimate and the moment your deposit confirms. A different deposit amount changes the payout too: if your wallet took its network fee out of the amount, less XMR arrived than you entered.
How do I swap PLS back to XMR?
Use the PLS to XMR page, linked next to the swap form. It works the same way in reverse: paste a Monero address, then send PLS to the one-time deposit address.
About these numbers
The calculator and the swap form ask for a live estimate for the amount you type; if one fails to load, try again a few seconds later. Fees and the minimum in the facts table are typical figures with their check date.