Exchange Currencies Track Order Guides Telegram bot

Swap Plasma (XPL) to Uniswap (UNI) with no sign-up

Enter the XPL amount, paste a BNB Smart Chain address from your own wallet, then send XPL to the one-time deposit address on your order page. Once the Plasma network has confirmed the deposit, the exchange partner swaps it at the floating rate and sends UNI on BNB Smart Chain straight to your address.

Swap UNI to XPL instead

Rate
1 XPL ≈ 0.00939067 UNI
Network Fee
-
Deposit Fee
-

Enter an address on the BNB Smart Chain (BEP-20) network. Coins sent to an address on another network can be lost.

Swap in Telegram

No Account Needed to Start

Swap without creating an account or uploading ID. xswap.to never asks for your seed phrase or private keys, and the exchanged coins go straight to your wallet. In rare cases the exchange partner's compliance check can pause a swap and ask for verification.

Updated Written and checked by the xswap.to team

XPL to UNI exchange rate

The XPL to UNI rate on this page is an estimate for a real swap after fees, so it reads a little lower than the ratio of the two market prices. It floats with the market until your deposit confirms.

Type any amount into the calculator below for a live figure. The table under it shows what several XPL amounts come to in UNI after fees. It is worked out from the page's latest quote and carries that quote's time. The daily table tracks the market rate between the two coins on each recent day, before swap fees, from xswap.to's own price record.

XPL to UNI Calculator

Enter an amount to see about how much you would receive. The estimate uses the live floating rate and already includes the payout network fee.

XPL Plasma
You get (estimate)
UNI BNB Chain BEP-20
18.7813424 UNI
Rate
1 XPL ≈ 0.00939067 UNI
Value in USD
≈ $90.46
Network Fee
0.0007273 UNI

XPL to UNI conversion table

Estimates after fees, worked out from one live quote taken at . The rate floats: the calculator and the swap form show the live figure.
You sendYou get (estimate after fees)
1,000 XPL≈ 9.39031 UNI
5,000 XPL≈ 46.9544 UNI
10,000 XPL≈ 93.9096 UNI
50,000 XPL≈ 469.551 UNI
100,000 XPL≈ 939.103 UNI
500,000 XPL≈ 4,695.52 UNI
1,000,000 XPL≈ 9,391.03 UNI

XPL to UNI daily rate

Market rate before swap fees, from xswap.to's own daily price record, Nov 16, 2026 to Nov 22, 2026.

Highest0.00985123 UNI
Lowest0.00839914 UNI
Change, 6 days+10.95%
0.00985123 0.00839914
Nov 16, 2026Nov 22, 2026
DateRate
1 XPL ≈ 0.00931923 UNI
1 XPL ≈ 0.00985123 UNI
1 XPL ≈ 0.00962998 UNI
1 XPL ≈ 0.00909325 UNI
1 XPL ≈ 0.00869448 UNI
1 XPL ≈ 0.00866882 UNI
1 XPL ≈ 0.00839914 UNI
Live Market Snapshot Updated Nov 22, 2026 06:34 UTC
1 XPL price
$0.0456
1 UNI price
$4.82
1 XPL buys
0.00939067 UNI

How to swap XPL to UNI

  1. Copy your UNI address

    Open your wallet with BNB Smart Chain selected and copy your 0x address from its receive screen; BNB and BEP-20 tokens use that one address. Paste it into Recipient Address and compare the first and last characters.

  2. Enter the XPL amount

    Type it in the form at the top. If it is under the pair's minimum, the form shows that minimum and one tap fills it in. The UNI estimate under it already has the payout fee taken out.

  3. Send XPL to the deposit address

    Press Exchange Now. Your order page shows a one-time Plasma deposit address: send the amount you entered in one transaction. Send XPL from a wallet that holds it on Plasma and also holds enough of the coin the network charges its fee in, usually its own coin.

  4. Follow the order until UNI arrives

    The status moves from waiting to confirming, exchanging, sending and finished. Keep the transaction ID from the order page until the UNI is in your wallet.

What the XPL to UNI swap costs

Two costs come out of the estimate before you see it: the exchange margin and the BNB Smart Chain network fee for your payout. You pay the Plasma network fee for your deposit yourself, in the coin the network charges fees in, usually its own coin, and your wallet works it out when you send.

The payout fee is a flat amount per payout, so it takes a larger share of a small swap, and the UNI you get per XPL drops near the minimum. The facts table below lists the typical network fees and the minimum with the date they were checked.

XPL to UNI at a glance

From live exchange data, refreshed hourly.

Item You send You receive
Asset Plasma (XPL) Uniswap (Binance Smart Chain) (UNI)
Network Plasma BNB Smart Chain
Type Native coin BEP-20 token
Contract - 0xBf5140…2ce9B1
Memo / tag Not needed Not needed
Network fee (typical, checked Nov 22, 2026) ≈ 0.000042 XPL ≈ 0.0007275 UNI
Route Cross-chain: Plasma to BNB Smart Chain
Rate Floating, estimate shown before you send
Minimum to send (typical, checked Nov 22, 2026) 0.1643539 XPL
Account / ID Not needed to start a swap

How long the XPL to UNI swap takes

The XPL to UNI swap is three waits in a row: the Plasma network confirms your deposit, the exchange partner swaps it, and the BNB Smart Chain network delivers the payout. The time Plasma needs to confirm a deposit depends on the network's design and on how busy it is, and the exchange partner swaps only after the confirmations it requires. In rare cases the partner's compliance check pauses an order, which adds time. The stages in order:

  1. Deposit sent and seen

    Your wallet broadcasts the XPL, and the order page moves from waiting to confirming once the deposit is found.

  2. Plasma confirms the deposit

    When the network is busy, a deposit sent with a low fee can wait longer for its first confirmation.

  3. Exchange and UNI payout

    The partner swaps the XPL and sends UNI. The status reaches sending, then finished, and the payout hash appears on the order page.

  4. Payout final on BNB Smart Chain

    Your wallet shows the payout once a block includes it, and in most cases the block is final within two blocks.

Your UNI address for the payout

BSC uses the Ethereum address format: 0x followed by 40 hexadecimal characters, and an Ethereum wallet's address works on BSC too. An address that starts with bnb1 belongs to the old BNB Beacon Chain, which stopped processing transactions in November 2024, so it cannot receive a BSC payout.

Copy the address from your wallet's receive screen, not from your transaction history, where a scammer's lookalike address can sit next to yours, and compare the first and last characters after pasting. A payout sent to a wrong address cannot be reversed. Mistakes that cost a payout:

  • An exchange deposit address meant for UNI on Ethereum or opBNB: the 0x address can look the same, but the exchange may not credit a BNB Smart Chain payout.
  • A token contract address copied from BscScan instead of your own wallet address: tokens sent to a contract that cannot handle them can be lost.
  • A multisig or other smart contract wallet deployed on another network but not on BNB Smart Chain, where a payout stays stuck unless the wallet can be recreated there.

Receiving UNI on BNB Smart Chain: address and memo

Memo or tagNot used on this network.
Block explorerbscscan.com

More about swapping on BNB Smart Chain

Which network your UNI arrives on

This page pays UNI on BNB Smart Chain. The same coin is listed on other networks too, each as its own entry in the coin list, and the links under this section open the ones open for payouts now.

Pick the entry before you press Exchange Now. The same coin on another network is a different asset to your wallet: balances do not carry over, moving it later takes another transfer, and an address on the wrong network can lose the payout. On the sending side, send XPL only on Plasma, the network your order page names. XPL sent on another network does not reach the deposit address.

After the UNI arrives

The payout shows in your wallet once a block includes it. BNB Smart Chain finalizes a block within two blocks when at least two thirds of validators vote; if too few vote, it falls back to probabilistic finality, where each further block makes the payout harder to reverse. You need no BNB to receive it, because the sender pays the gas. Moving the UNI later costs gas paid in BNB, so keep some BNB at that address. As a BEP-20 token, this UNI stays on BNB Smart Chain; moving it elsewhere takes a bridge or another swap.

If the address belongs to an exchange, check that the exchange credits UNI on BNB Smart Chain at that address and what its minimum deposit is; a deposit below the minimum or on a network it does not support may not be credited. To check the payout yourself, open the payout hash from the order page in a BNB Smart Chain explorer such as BscScan.

If your XPL deposit is slow or stuck

Look up the transaction ID from your wallet in a block explorer for Plasma. If the explorer cannot find it, the transfer may never have been broadcast, so check your wallet's history first. If it is listed but not yet confirmed, the network may be busy or the fee may be below what it takes now; your wallet's help pages say whether a pending fee can be raised.

Never send the deposit a second time to speed things up: a second payment is a second deposit. If the order page has not moved on after your deposit confirmed, message @xswap_to on Telegram with the Ref. ID from the order page and your deposit hash.

What others can see of your XPL to UNI swap

Your deposit is recorded on Plasma for good, and on most networks its amount and both addresses can be read by anyone with a block explorer. The payout, its amount and your 0x address are public on BscScan, and so is everything that address does later on BNB Smart Chain. The exchange partner that processes the swap sees both sides: your deposit and your payout address.

Before you send

  • Send XPL only on Plasma, the network your order page names, because a transfer on another network or to a wrong address cannot be reversed.
  • Copy your UNI address from the wallet's receive screen and compare its start and end after pasting.
  • Send the amount you entered in one transaction, and let your wallet add its network fee on top.
  • Bookmark the order page and save its Ref. ID, because the Track Order list is stored only in this browser.

XPL to UNI Frequently Asked Questions

How do I swap XPL to UNI?

Enter the XPL amount and your UNI address in the form at the top, press Exchange Now, and send XPL to the one-time deposit address on your order page. After the Plasma network confirms the deposit, the exchange partner sends UNI on BNB Smart Chain to your address. No account or email is needed.

How much UNI do I get for 1 XPL?

The amount table in the rate section shows it for several sizes, as an estimate after fees with the time of the quote. For your own amount, the XPL to UNI calculator asks for a live estimate. No figure is written here, because the rate floats.

How long does XPL to UNI take?

There is no set time: the Plasma network confirms the deposit first, then the exchange partner swaps it and sends the UNI payout. The timing section on this page lists each stage, and the order page shows which one you are in.

Is there a minimum amount for XPL to UNI?

Yes, every pair has a minimum, and it moves with network conditions. The facts table on this page lists the last checked figure. The swap form warns you when your amount is under the current one. A deposit below it cannot be swapped, and getting those coins back is not assured.

Can I swap Plasma to Uniswap without KYC?

You need no account, and xswap.to asks for no ID. In rare cases the exchange partner's automated anti-money-laundering screening pauses a flagged swap and asks for verification, and the order then shows the status verifying. If that happens, message @xswap_to on Telegram with your transaction ID.

Can I receive UNI on another network?

Yes, through a different entry in the coin list, since this page pays UNI on BNB Smart Chain. The network section on this page links to the entries open for payouts now. Pick the entry before you press Exchange Now.

Why is the UNI I received different from the estimate?

The rate floats, so the market can move between the estimate and the moment your deposit confirms. A different deposit amount changes the payout too: if your wallet took its network fee out of the amount, less XPL arrived than you entered.

How do I swap UNI back to XPL?

Use the UNI to XPL page, linked next to the swap form. It works the same way in reverse: paste a Plasma address, then send UNI to the one-time deposit address.

About these numbers

The calculator and the swap form ask for a live estimate for the amount you type; if one fails to load, try again a few seconds later. The amount table is worked out from the page's latest quote and the network fees in it, so treat it as a guide and use the calculator for your own amount. The daily rates come from xswap.to's own price record, one value per day, and show the market rate before swap fees. Fees and the minimum in the facts table are typical figures with their check date.

Guides for this swap

Related swaps

Popular swaps