Exchange Currencies Track Order Guides Telegram bot

Swap Ethereum (ETH) to Babylon (BABY) with no sign-up

Enter the ETH amount, paste your Babylon Genesis address from your own wallet, then send ETH on zkSync Era to the one-time deposit address on your order page. Once the zkSync Era network has confirmed the deposit, the exchange partner swaps it at the floating rate and sends BABY on Babylon Genesis straight to your address.

Swap BABY to ETH instead

Rate
1 ETH ā‰ˆ 214,605.7285 BABY
Network Fee
-
Deposit Fee
-

Enter an address on the Babylon Genesis network. Coins sent to an address on another network can be lost.

This coin requires a memo/tag. Funds sent without it may be lost.

Swap in Telegram

No Account Needed to Start

Swap without creating an account or uploading ID. xswap.to never asks for your seed phrase or private keys, and the exchanged coins go straight to your wallet. In rare cases the exchange partner's compliance check can pause a swap and ask for verification.

Updated Written and checked by the xswap.to team

ETH to BABY exchange rate

The ETH to BABY rate on this page is an estimate for a real swap after fees, so it reads a little lower than the ratio of the two market prices. It floats with the market until your deposit confirms.

Type any amount into the calculator below for a live figure. The table under it shows what several ETH amounts come to in BABY after fees. It is worked out from the page's latest quote and carries that quote's time. The daily table tracks the market rate between the two coins on each recent day, before swap fees, from xswap.to's own price record.

ETH to BABY Calculator

Enter an amount to see about how much you would receive. The estimate uses the live floating rate and already includes the payout network fee.

ETH zkSync
You get (estimate)
BABY Babylon Genesis
214,605.728521 BABY
Rate
1 ETH ā‰ˆ 214,606 BABY
Value in USD
ā‰ˆ $1,713.85
Network Fee
0.1 BABY

ETH to BABY conversion table

Estimates after fees, worked out from one live quote taken at . The rate floats: the calculator and the swap form show the live figure.
You sendYou get (estimate after fees)
0.1 ETHā‰ˆ 21,419.9 BABY
0.5 ETHā‰ˆ 107,280 BABY
1 ETHā‰ˆ 214,606 BABY
5 ETHā‰ˆ 1,073,209 BABY
10 ETHā‰ˆ 2,146,464 BABY

ETH to BABY daily rate

Market rate before swap fees, from xswap.to's own daily price record, Nov 16, 2026 to Nov 22, 2026.

Highest225,897 BABY
Lowest207,315 BABY
Change, 6 days+4.90%
225,897 207,315
Nov 16, 2026Nov 22, 2026
DateRate
1 ETH ā‰ˆ 225,897 BABY
1 ETH ā‰ˆ 207,315 BABY
1 ETH ā‰ˆ 208,731 BABY
1 ETH ā‰ˆ 214,262 BABY
1 ETH ā‰ˆ 219,149 BABY
1 ETH ā‰ˆ 217,812 BABY
1 ETH ā‰ˆ 215,350 BABY
Live Market Snapshot Updated Nov 22, 2026 14:17 UTC
1 ETH price
$1,749.28
1 BABY price
$0.00798602
1 ETH buys
214605.728521 BABY

How to swap ETH to BABY

  1. Copy your BABY address

    Open your wallet's receive screen for BABY on Babylon Genesis and copy the address it shows, after checking that the wallet names the same network. Paste it into Recipient Address and compare the first and last characters. If the address comes from an exchange, also enter the memo it shows with the address.

  2. Enter the ETH amount

    Type it in the form at the top. If it is under the pair's minimum, the form shows that minimum and one tap fills it in. The BABY estimate under it already has the payout fee taken out.

  3. Send ETH to the deposit address

    Press Exchange Now. Your order page shows a one-time zkSync Era deposit address: send the amount you entered in one transaction. Send from a wallet switched to zkSync Era that holds some ETH there for gas, and check the network name on the confirmation screen before you approve.

  4. Follow the order until BABY arrives

    The status moves from waiting to confirming, exchanging, sending and finished. Keep the transaction ID from the order page until the BABY is in your wallet.

What the ETH to BABY swap costs

Two costs come out of the estimate before you see it: the exchange margin and the Babylon Genesis network fee for your payout. You pay the zkSync Era network fee yourself in ETH on zkSync Era, for ETH and tokens alike, unless an app's paymaster covers it; the fee depends partly on Ethereum gas prices, and your wallet estimates it. When you send ETH, the fee comes out of the same ETH balance on zkSync Era, so the wallet needs the amount you entered plus the fee.

The payout fee is a flat amount per payout, so it takes a larger share of a small swap, and the BABY you get per ETH drops near the minimum. The facts table below lists the typical network fees and the minimum with the date they were checked.

ETH to BABY at a glance

From live exchange data, refreshed hourly.

Item You send You receive
Asset Ethereum (ZkSync Era) (ETH) Babylon (BABY)
Network zkSync Era Babylon Genesis
Type Native coin Token
Contract - ^[0-9A-Z…,120}$
Memo / tag Not needed Required with your address
Network fee (typical, checked Nov 22, 2026) ā‰ˆ 0.00021 ETH ā‰ˆ 0.1 BABY
Route Cross-chain: zkSync Era to Babylon Genesis
Rate Floating, estimate shown before you send
Minimum to send (typical, checked Nov 22, 2026) 0.000464 ETH
Account / ID Not needed to start a swap

How long the ETH to BABY swap takes

The ETH to BABY swap is three waits in a row: the zkSync Era network confirms your deposit, the exchange partner swaps it, and the Babylon Genesis network delivers the payout. zkSync Era makes a block about every second, and the sequencer confirms your deposit once one includes it. It is final only after its batch is proven and executed on Ethereum, and the exchange partner swaps after the confirmations it requires. In rare cases the partner's compliance check pauses an order, which adds time. The stages in order:

  1. Deposit sent and seen

    Your wallet broadcasts the ETH, and the order page moves from waiting to confirming once the deposit is found.

  2. A zkSync Era block includes it

    Its batch is then committed to Ethereum, proven, and executed after a security delay, which makes it final.

  3. Exchange and BABY payout

    The partner swaps the ETH and sends BABY. The status reaches sending, then finished, and the payout hash appears on the order page.

  4. Payout confirmed on Babylon Genesis

    Your wallet lists the BABY as received once Babylon Genesis has confirmed the payout.

Your BABY address for the payout

A Babylon Genesis address is bech32 and starts with bbn1. The swap form accepted bbn1 addresses in our checks. A 0x address with 40 hex characters was rejected in our checks, so do not paste an EVM address here.

Copy the address from your wallet's receive screen, not from your transaction history, where a scammer's lookalike address can sit next to yours, and compare the first and last characters after pasting. A payout sent to a wrong address cannot be reversed. BABY on Babylon Genesis can also carry a memo. If your address comes from an exchange, enter the memo it gives you, because the exchange uses it to credit your account; a wallet you control usually needs none. Mistakes that cost a payout:

  • An address for BABY on another network: the same coin on a different network is a separate asset, and a payout sent there can be lost.
  • An exchange address used without the memo or tag the exchange asks for, which it needs to credit the payout to you.
  • A token contract address copied from an explorer instead of the address of your own wallet.

Receiving BABY on Babylon Genesis: address and memo

Memo or tagNeeded when the receiving wallet asks for one, which exchange accounts usually do. Enter it in the memo field of the form.
Block explorerwww.mintscan.io

Send ETH on the right network

On the sending side, send ETH only on zkSync Era, the network your order page names. ETH sent on another network does not reach the deposit address. ETH exists on more than one network, and each is a separate entry in the coin list. Choose the entry that matches the network your coins are on before you create the order.

After the BABY arrives

The payout is an ordinary Babylon Genesis transaction from the exchange partner to your address. Your wallet shows it once it has seen the transaction, often as pending at first, and counts it as received once the network has confirmed it. If nothing shows, check that the wallet is set to Babylon Genesis and, for a token, that it displays this token. To move the BABY later, the same wallet also needs the coin Babylon Genesis charges fees in, which is usually its own coin.

If the address belongs to an exchange, check that the exchange accepts BABY on Babylon Genesis, what its minimum deposit is and whether it needs a memo or tag; exchanges credit deposits by their own rules. To check the payout yourself, look up the payout hash from the order page in a Babylon Genesis block explorer.

If your ETH deposit is slow or stuck

Look up the transaction hash on explorer.zksync.io. If it is not there, check which network your wallet sent on: the same 0x address exists on Ethereum, on other chains built with the ZK Stack and on other EVM networks, but the order waits for a transfer on zkSync Era only.

If the transfer is not on the explorer, check that the wallet held enough ETH on zkSync Era for the fee: unless a paymaster covers it, an ordinary account pays the fee in ETH, so a token send needs ETH beside the token. zkSync Era has no priority fee, so raising the tip does not move a transaction ahead.

Never send the deposit a second time to speed things up: a second payment is a second deposit. If the order page has not moved on after your deposit confirmed, message @xswap_to on Telegram with the Ref. ID from the order page and your deposit hash.

What others can see of your ETH to BABY swap

Your deposit is public: the amount, your sending address and the deposit address show on explorer.zksync.io, and the resulting state changes are published to Ethereum. The payout is recorded on Babylon Genesis too, where its amount and your receiving address are usually visible to anyone with a block explorer. The exchange partner that processes the swap sees both sides: your deposit and your payout address.

Before you send

  • Switch your wallet to zkSync Era and keep some ETH there for gas before you send, even when the deposit is a token.
  • Copy your BABY address from the wallet's receive screen and compare its start and end after pasting.
  • Enter the memo your exchange gives you for BABY, or the payout cannot be credited to your account.
  • Send the amount you entered in one transaction, and let your wallet add its network fee on top.
  • Bookmark the order page and save its Ref. ID, because the Track Order list is stored only in this browser.

ETH to BABY Frequently Asked Questions

How do I swap ETH to BABY?

Enter the ETH amount and your BABY address in the form at the top, press Exchange Now, and send ETH on zkSync Era to the one-time deposit address on your order page. After the zkSync Era network confirms the deposit, the exchange partner sends BABY on Babylon Genesis to your address. No account or email is needed.

How much BABY do I get for 1 ETH?

The amount table in the rate section shows it for several sizes, as an estimate after fees with the time of the quote. For your own amount, the ETH to BABY calculator asks for a live estimate. No figure is written here, because the rate floats.

How long does ETH to BABY take?

There is no set time: the zkSync Era network confirms the deposit first, then the exchange partner swaps it and sends the BABY payout. The timing section on this page lists each stage, and the order page shows which one you are in.

Is there a minimum amount for ETH to BABY?

Yes, every pair has a minimum, and it moves with network conditions. The facts table on this page lists the last checked figure. The swap form warns you when your amount is under the current one. A deposit below it cannot be swapped, and getting those coins back is not assured.

Can I swap Ethereum to Babylon without KYC?

You need no account, and xswap.to asks for no ID. In rare cases the exchange partner's automated anti-money-laundering screening pauses a flagged swap and asks for verification, and the order then shows the status verifying. If that happens, message @xswap_to on Telegram with your transaction ID.

Do I need a memo or tag to swap ETH to BABY?

For the payout, only if your BABY address belongs to an exchange: enter the memo it shows with the address. A wallet you control usually needs none.

Why is the BABY I received different from the estimate?

The rate floats, so the market can move between the estimate and the moment your deposit confirms. A different deposit amount changes the payout too: if your wallet took its network fee out of the amount, less ETH arrived than you entered.

How do I swap BABY back to ETH?

Use the BABY to ETH page, linked next to the swap form. It works the same way in reverse: paste a zkSync Era address, then send BABY to the one-time deposit address.

About these numbers

The calculator and the swap form ask for a live estimate for the amount you type; if one fails to load, try again a few seconds later. The amount table is worked out from the page's latest quote and the network fees in it, so treat it as a guide and use the calculator for your own amount. The daily rates come from xswap.to's own price record, one value per day, and show the market rate before swap fees. Fees and the minimum in the facts table are typical figures with their check date.

Guides for this swap

Related swaps

Popular swaps