Enter the ETH on zkSync Era amount, paste your 0x address on Arbitrum One from your own wallet, then send ETH on zkSync Era to the one-time deposit address on your order page. Once the zkSync Era network has confirmed the deposit, the exchange partner swaps it at the floating rate and sends ETH on Arbitrum One straight to your address.
Swap without creating an account or uploading ID. xswap.to never asks for your seed phrase or private keys, and the exchanged coins go straight to your wallet. In rare cases the exchange partner's compliance check can pause a swap and ask for verification.
ETH on zkSync Era to ETH on Arbitrum One exchange rate
The ETH on zkSync Era to ETH on Arbitrum One rate on this page is an estimate for a real swap after fees, so it reads a little lower than the ratio of the two market prices. It floats with the market until your deposit confirms.
Type any amount into the calculator below for a live figure. The table under it shows what several ETH on zkSync Era amounts come to in ETH on Arbitrum One after fees. It is worked out from the page's latest quote and carries that quote's time.
ETH (zkSync Era) to ETH (Arbitrum One) Calculator
Enter an amount to see about how much you would receive. The estimate uses the live floating rate and already includes the payout network fee.
ETHzkSync
You get (estimate)
ETHArbitrum
Rate
1 ETH ≈ 0.976021 ETH
Value in USD
≈ $1,660.53
Network Fee
0.00006 ETH
ETH (zkSync Era) to ETH (Arbitrum One) conversion table
Estimates after fees, worked out from one live quote taken at . The rate floats: the calculator and the swap form show the live figure.
Live Market SnapshotUpdated Nov 22, 2026 05:18 UTC
1 ETH price
$1,693.29
1 ETH price
$1,701.33
1 ETH buys
0.9760214 ETH
How to swap ETH (zkSync Era) to ETH (Arbitrum One)
1
Copy your ETH on Arbitrum One address
Open your wallet with Arbitrum One selected as the network and copy the 0x address from its receive screen. Paste it into Recipient Address and compare the first and last characters.
2
Enter the ETH on zkSync Era amount
Type it in the form at the top. If it is under the pair's minimum, the form shows that minimum and one tap fills it in. The ETH on Arbitrum One estimate under it already has the payout fee taken out.
3
Send ETH on zkSync Era to the deposit address
Press Exchange Now. Your order page shows a one-time zkSync Era deposit address: send the amount you entered in one transaction. Send from a wallet switched to zkSync Era that holds some ETH there for gas, and check the network name on the confirmation screen before you approve.
4
Follow the order until ETH on Arbitrum One arrives
The status moves from waiting to confirming, exchanging, sending and finished. Keep the transaction ID from the order page until the ETH on Arbitrum One is in your wallet.
What the ETH on zkSync Era to ETH on Arbitrum One swap costs
Two costs come out of the estimate before you see it: the exchange margin and the Arbitrum One network fee for your payout. You pay the zkSync Era network fee yourself in ETH on zkSync Era, for ETH and tokens alike, unless an app's paymaster covers it; the fee depends partly on Ethereum gas prices, and your wallet estimates it. When you send ETH, the fee comes out of the same ETH balance on zkSync Era, so the wallet needs the amount you entered plus the fee.
The payout fee is a flat amount per payout, so it takes a larger share of a small swap, and the ETH on Arbitrum One you get per ETH on zkSync Era drops near the minimum. The facts table below lists the typical network fees and the minimum with the date they were checked.
ETH to ETH at a glance
From live exchange data, refreshed hourly.
Item
You send
You receive
Asset
Ethereum (ZkSync Era) (ETH)
Ethereum (Arbitrum) (ETH)
Network
zkSync Era
Arbitrum One
Type
Native coin
Native coin
Memo / tag
Not needed
Not needed
Network fee (typical, checked Nov 22, 2026)
≈ 0.00021 ETH
≈ 0.00006 ETH
Route
Cross-chain: zkSync Era to Arbitrum One
Rate
Floating, estimate shown before you send
Minimum to send (typical, checked Nov 22, 2026)
0.000584 ETH
Account / ID
Not needed to start a swap
How long the ETH on zkSync Era to ETH on Arbitrum One swap takes
The ETH on zkSync Era to ETH on Arbitrum One swap is three waits in a row: the zkSync Era network confirms your deposit, the exchange partner swaps it, and the Arbitrum One network delivers the payout. zkSync Era makes a block about every second, and the sequencer confirms your deposit once one includes it. It is final only after its batch is proven and executed on Ethereum, and the exchange partner swaps after the confirmations it requires. In rare cases the partner's compliance check pauses an order, which adds time. The stages in order:
1Deposit sent and seen
Your wallet broadcasts the ETH on zkSync Era, and the order page moves from waiting to confirming once the deposit is found.
2A zkSync Era block includes it
Its batch is then committed to Ethereum, proven, and executed after a security delay, which makes it final.
3Exchange and ETH on Arbitrum One payout
The partner swaps the ETH on zkSync Era and sends ETH on Arbitrum One. The status reaches sending, then finished, and the payout hash appears on the order page.
4Payout lands on Arbitrum One
Your wallet lists it once an Arbitrum One block includes the transaction, as long as the wallet is set to Arbitrum One.
Your ETH on Arbitrum One address for the payout
Arbitrum One uses the Ethereum address format: 0x followed by 40 hexadecimal characters, the same address your wallet shows on Ethereum. Copy the address from your wallet's receive screen, not from your transaction history, where a scammer's lookalike address can sit next to yours, and compare the first and last characters after pasting. A payout sent to a wrong address cannot be reversed. Mistakes that cost a payout:
An exchange deposit address meant for Ethereum mainnet or Arbitrum Nova: the payout is sent on Arbitrum One, a separate chain.
An address at a wallet or exchange that does not support Arbitrum One: Arbitrum's FAQ says its team cannot recover such funds; only that wallet or exchange might.
A smart contract wallet address, such as a multisig, that exists on another network but not on Arbitrum One: getting a payout back then depends on deploying that wallet there.
A token contract address copied from Arbiscan instead of your own wallet address: tokens sent to a contract that cannot handle them can be stuck for good.
This page pays ETH on Arbitrum One. The same coin is listed on other networks too, each as its own entry in the coin list, and the links under this section open the ones open for payouts now.
Pick the entry before you press Exchange Now. The same coin on another network is a different asset to your wallet: balances do not carry over, moving it later takes another transfer, and an address on the wrong network can lose the payout. On the sending side, send ETH on zkSync Era only on zkSync Era, the network your order page names. ETH on zkSync Era sent on another network does not reach the deposit address.
The payout is an Arbitrum One transaction, not an Ethereum mainnet one, so a wallet set to Ethereum shows nothing of it; switch yours to Arbitrum One. The coins can be moved again once the transaction is in a block, and the transfer is final when its batch is final on Ethereum.
Moving the payout to Ethereum mainnet later takes a bridge. Through the official Arbitrum bridge, a withdrawal takes at least seven days because of the challenge period, and you then claim it on Ethereum with a transaction that needs ETH on Ethereum for gas. ETH is the gas coin of Arbitrum One, so the payout itself pays the fee when you move it, or anything else on Arbitrum One, later.
If the address belongs to an exchange, check that it accepts this coin on Arbitrum One and what its minimum deposit is; for a token, it must support the same contract. Arbitrum tells exchanges to credit deposits only once they are final on Ethereum. To check the payout yourself, open the payout hash from the order page in an Arbitrum One explorer such as Arbiscan.
If your ETH on zkSync Era deposit is slow or stuck
Look up the transaction hash on explorer.zksync.io. If it is not there, check which network your wallet sent on: the same 0x address exists on Ethereum, on other chains built with the ZK Stack and on other EVM networks, but the order waits for a transfer on zkSync Era only.
If the transfer is not on the explorer, check that the wallet held enough ETH on zkSync Era for the fee: unless a paymaster covers it, an ordinary account pays the fee in ETH, so a token send needs ETH beside the token. zkSync Era has no priority fee, so raising the tip does not move a transaction ahead.
Never send the deposit a second time to speed things up: a second payment is a second deposit. If the order page has not moved on after your deposit confirmed, message @xswap_to on Telegram with the Ref. ID from the order page and your deposit hash.
What others can see of your ETH on zkSync Era to ETH on Arbitrum One swap
Your deposit is public: the amount, your sending address and the deposit address show on explorer.zksync.io, and the resulting state changes are published to Ethereum. The payout, its amount and your receiving address are public on Arbiscan, where anyone who knows the address can see its whole history on Arbitrum One. The exchange partner that processes the swap sees both sides: your deposit and your payout address.
Before you send
Switch your wallet to zkSync Era and keep some ETH there for gas before you send, even when the deposit is a token.
Copy your ETH on Arbitrum One address from the wallet's receive screen and compare its start and end after pasting.
Send the amount you entered in one transaction, and let your wallet add its network fee on top.
Bookmark the order page and save its Ref. ID, because the Track Order list is stored only in this browser.
ETH to ETH Frequently Asked Questions
How do I swap ETH on zkSync Era to ETH on Arbitrum One?
Enter the ETH on zkSync Era amount and your ETH on Arbitrum One address in the form at the top, press Exchange Now, and send ETH on zkSync Era to the one-time deposit address on your order page. After the zkSync Era network confirms the deposit, the exchange partner sends ETH on Arbitrum One to your address. No account or email is needed.
How much ETH on Arbitrum One do I get for 1 ETH on zkSync Era?
The amount table in the rate section shows it for several sizes, as an estimate after fees with the time of the quote. For your own amount, the ETH on zkSync Era to ETH on Arbitrum One calculator asks for a live estimate. No figure is written here, because the rate floats.
How long does ETH on zkSync Era to ETH on Arbitrum One take?
There is no set time: the zkSync Era network confirms the deposit first, then the exchange partner swaps it and sends the ETH on Arbitrum One payout. The timing section on this page lists each stage, and the order page shows which one you are in.
Is there a minimum amount for ETH on zkSync Era to ETH on Arbitrum One?
Yes, every pair has a minimum, and it moves with network conditions. The facts table on this page lists the last checked figure. The swap form warns you when your amount is under the current one. A deposit below it cannot be swapped, and getting those coins back is not assured.
Can I swap Ethereum to Ethereum without KYC?
You need no account, and xswap.to asks for no ID. In rare cases the exchange partner's automated anti-money-laundering screening pauses a flagged swap and asks for verification, and the order then shows the status verifying. If that happens, message @xswap_to on Telegram with your transaction ID.
Why is the ETH on Arbitrum One I received different from the estimate?
The rate floats, so the market can move between the estimate and the moment your deposit confirms. A different deposit amount changes the payout too: if your wallet took its network fee out of the amount, less ETH on zkSync Era arrived than you entered.
How do I swap ETH on Arbitrum One back to ETH on zkSync Era?
Use the ETH on Arbitrum One to ETH on zkSync Era page, linked next to the swap form. It works the same way in reverse: paste a zkSync Era address, then send ETH on Arbitrum One to the one-time deposit address.
About these numbers
The calculator and the swap form ask for a live estimate for the amount you type; if one fails to load, try again a few seconds later. The amount table is worked out from the page's latest quote and the network fees in it, so treat it as a guide and use the calculator for your own amount. Fees and the minimum in the facts table are typical figures with their check date.