Enter the ATH amount, paste a Polygon PoS address from your own wallet, then send ATH on Ethereum to the one-time deposit address on your order page. Once the Ethereum network has confirmed the deposit, the exchange partner swaps it at the floating rate and sends DAI on Polygon PoS straight to your address.
Swap without creating an account or uploading ID. xswap.to never asks for your seed phrase or private keys, and the exchanged coins go straight to your wallet. In rare cases the exchange partner's compliance check can pause a swap and ask for verification.
The ATH to DAI rate on this page is an estimate for a real swap after fees, so it reads a little lower than the ratio of the two market prices. It floats with the market until your deposit confirms.
Type any amount into the calculator below for a live figure. The table under it shows what several ATH amounts come to in DAI after fees. It is worked out from the page's latest quote and carries that quote's time.
ATH to DAI Calculator
Enter an amount to see about how much you would receive. The estimate uses the live floating rate and already includes the payout network fee.
ATHEthereumERC-20
You get (estimate)
DAIPolygonERC-20
Rate
1 ATH ≈ 0.00375257 DAI
Value in USD
≈ $112.58
Network Fee
0.0058903 DAI
ATH to DAI conversion table
Estimates after fees, worked out from one live quote taken at . The rate floats: the calculator and the swap form show the live figure.
Live Market SnapshotUpdated Nov 20, 2026 02:11 UTC
1 ATH price
$0.00398374
1 DAI price
$1.00
1 ATH buys
0.00375257 DAI
How to swap ATH to DAI
1
Copy your DAI address
Open your wallet with Polygon PoS selected, which wallets may list as Polygon or Polygon Mainnet, and copy your 0x address from its receive screen. Paste it into Recipient Address and compare the first and last characters.
2
Enter the ATH amount
Type it in the form at the top. If it is under the pair's minimum, the form shows that minimum and one tap fills it in. The DAI estimate under it already has the payout fee taken out.
3
Send ATH to the deposit address
Press Exchange Now. Your order page shows a one-time Ethereum deposit address: send the amount you entered in one transaction. Send from a wallet set to Ethereum mainnet that holds enough ETH for gas, and keep the max fee it suggests.
4
Follow the order until DAI arrives
The status moves from waiting to confirming, exchanging, sending and finished. Keep the transaction ID from the order page until the DAI is in your wallet.
What the ATH to DAI swap costs
Two costs come out of the estimate before you see it: the exchange margin and the Polygon PoS network fee for your payout. You pay the Ethereum gas fee yourself, in ETH: the gas the transfer uses times the base fee plus a priority tip, and most wallets suggest both. An ERC-20 transfer runs the token's contract, so it uses more gas than a plain ETH transfer, and that gas is paid in ETH.
The payout fee is a flat amount per payout, so it takes a larger share of a small swap, and the DAI you get per ATH drops near the minimum. The facts table below lists the typical network fees and the minimum with the date they were checked.
ATH to DAI at a glance
From live exchange data, refreshed hourly.
Item
You send
You receive
Asset
Aethir (ATH)
DAI
Network
Ethereum
Polygon PoS
Type
ERC-20 token
ERC-20 token
Contract
0xbe0ed4…c5226b
0x8f3Cf7…c6A063
Memo / tag
Not needed
Not needed
Network fee (typical, checked Nov 19, 2026)
≈ 69.17 ATH
≈ 0.006224 DAI
Route
Cross-chain: Ethereum to Polygon PoS
Rate
Floating, estimate shown before you send
Minimum to send (typical, checked Nov 20, 2026)
156.4302186 ATH
Account / ID
Not needed to start a swap
How long the ATH to DAI swap takes
The ATH to DAI swap is three waits in a row: the Ethereum network confirms your deposit, the exchange partner swaps it, and the Polygon PoS network delivers the payout. Ethereum runs in 12-second slots, each with one validator chosen to propose a block, though a slot is sometimes empty; the exchange partner swaps once your deposit has the confirmations it requires. In rare cases the partner's compliance check pauses an order, which adds time. The stages in order:
1Deposit sent and seen
Your wallet broadcasts the ATH, and the order page moves from waiting to confirming once the deposit is found.
2Ethereum includes it in a block
Each 12-second slot can add a block. A deposit whose max fee is below the base fee can wait until the base fee falls or you speed it up.
3Exchange and DAI payout
The partner swaps the ATH and sends DAI. The status reaches sending, then finished, and the payout hash appears on the order page.
4Payout final on Polygon PoS
Your wallet shows the payout once a block includes it, and a milestone then finalizes that block for good.
Your DAI address for the payout
Polygon PoS uses the Ethereum address format: 0x followed by 40 hexadecimal characters. Copy the address from your wallet's receive screen, not from your transaction history, where a scammer's lookalike address can sit next to yours, and compare the first and last characters after pasting. A payout sent to a wrong address cannot be reversed. Mistakes that cost a payout:
An exchange deposit address meant for DAI on Ethereum or another network: the 0x address can look the same, but the exchange may not credit a Polygon PoS payout.
A token contract address copied from PolygonScan instead of your own wallet address: tokens sent to a contract that cannot handle them can be lost.
A multisig or other smart contract wallet deployed on another network but not on Polygon PoS, where a payout stays stuck unless the wallet can be recreated there.
This page pays DAI on Polygon PoS. The same coin is listed on other networks too, each as its own entry in the coin list, and the links under this section open the ones open for payouts now.
Pick the entry before you press Exchange Now. The same coin on another network is a different asset to your wallet: balances do not carry over, moving it later takes another transfer, and an address on the wrong network can lose the payout.
The payout shows in your wallet once a block includes it, and a later milestone finalizes that block, after which it cannot be reorganized. You need no POL to receive the payout, because the sender pays the gas. A wallet that still shows MATIC as the network's own coin is showing the same POL balance under the old symbol. Moving the DAI later costs gas paid in POL, so keep some POL at that address. Some tokens have two versions on Polygon PoS with different contracts, such as native USDC and bridged USDC.e, and exchanges may accept only one.
If the address belongs to an exchange, check that the exchange credits DAI on Polygon PoS, not only on Ethereum, and what its minimum deposit is; a deposit on a network it does not support may not be credited. To check the payout yourself, open the payout hash from the order page in a Polygon PoS explorer such as PolygonScan.
If your ATH deposit is slow or stuck
Look up the transaction hash on Etherscan. If it is still pending, its max fee is probably below the current base fee, which rises after blocks fuller than the target, or its tip is too small for validators to pick it. It can also wait behind an earlier pending transaction from your address with a lower nonce. If your wallet offers speed up, use it on the oldest pending one: the wallet resends the same transaction with the same nonce and a higher fee, so only one of the two can confirm.
Do not press cancel on a deposit, because a cancellation that confirms means nothing reaches the order. The sped-up version has a new hash, so give that one to support. If Etherscan marks the transaction as failed, the coins stayed in your wallet but the gas was spent, so ask support before you send again. A withdrawal from an exchange account can only be sped up by that exchange.
Never send the deposit a second time to speed things up: a second payment is a second deposit. If the order page has not moved on after your deposit confirmed, message @xswap_to on Telegram with the Ref. ID from the order page and your deposit hash.
What others can see of your ATH to DAI swap
Your deposit is public on Ethereum: your sending address, the deposit address, the amount and the fee show on Etherscan and any other explorer, and they stay there. The payout, its amount and your 0x address are public on PolygonScan, and so is everything that address does later on Polygon PoS. The exchange partner that processes the swap sees both sides: your deposit and your payout address.
Before you send
Leave enough ETH in your wallet for gas on top of what you send, because Ethereum rejects a transfer whose fee the balance cannot cover.
Copy your DAI address from the wallet's receive screen and compare its start and end after pasting.
Send the amount you entered in one transaction, and let your wallet add its network fee on top.
Bookmark the order page and save its Ref. ID, because the Track Order list is stored only in this browser.
ATH to DAI Frequently Asked Questions
How do I swap ATH to DAI?
Enter the ATH amount and your DAI address in the form at the top, press Exchange Now, and send ATH on Ethereum to the one-time deposit address on your order page. After the Ethereum network confirms the deposit, the exchange partner sends DAI on Polygon PoS to your address. No account or email is needed.
How much DAI do I get for 1 ATH?
The amount table in the rate section shows it for several sizes, as an estimate after fees with the time of the quote. For your own amount, the ATH to DAI calculator asks for a live estimate. No figure is written here, because the rate floats.
How long does ATH to DAI take?
There is no set time: the Ethereum network confirms the deposit first, then the exchange partner swaps it and sends the DAI payout. The timing section on this page lists each stage, and the order page shows which one you are in.
Is there a minimum amount for ATH to DAI?
Yes, every pair has a minimum, and it moves with network conditions. The facts table on this page lists the last checked figure. The swap form warns you when your amount is under the current one. A deposit below it cannot be swapped, and getting those coins back is not assured.
Can I swap Aethir to DAI without KYC?
You need no account, and xswap.to asks for no ID. In rare cases the exchange partner's automated anti-money-laundering screening pauses a flagged swap and asks for verification, and the order then shows the status verifying. If that happens, message @xswap_to on Telegram with your transaction ID.
Can I receive DAI on another network?
Yes, through a different entry in the coin list, since this page pays DAI on Polygon PoS. The network section on this page links to the entries open for payouts now. Pick the entry before you press Exchange Now.
Why is the DAI I received different from the estimate?
The rate floats, so the market can move between the estimate and the moment your deposit confirms. A different deposit amount changes the payout too: if your wallet took its network fee out of the amount, less ATH arrived than you entered.
How do I swap DAI back to ATH?
Use the DAI to ATH page, linked next to the swap form. It works the same way in reverse: paste an Ethereum address, then send DAI to the one-time deposit address.
About these numbers
The calculator and the swap form ask for a live estimate for the amount you type; if one fails to load, try again a few seconds later. The amount table is worked out from the page's latest quote and the network fees in it, so treat it as a guide and use the calculator for your own amount. Fees and the minimum in the facts table are typical figures with their check date.