Exchange Currencies Track Order Guides Telegram bot

Swap Aethir (ATH) to Stellar (XLM) with no sign-up

Enter the ATH amount, paste a Stellar G address from your own wallet, then send ATH on Ethereum to the one-time deposit address on your order page. Once the Ethereum network has confirmed the deposit, the exchange partner swaps it at the floating rate and sends XLM straight to your address.

Swap XLM to ATH instead

Rate
1 ATH ≈ 0.0285283 XLM
Network Fee
-
Deposit Fee
-

Enter an address on the Stellar network. Coins sent to an address on another network can be lost.

This coin requires a memo/tag. Funds sent without it may be lost.

Swap in Telegram

No Account Needed to Start

Swap without creating an account or uploading ID. xswap.to never asks for your seed phrase or private keys, and the exchanged coins go straight to your wallet. In rare cases the exchange partner's compliance check can pause a swap and ask for verification.

Updated Written and checked by the xswap.to team

ATH to XLM exchange rate

The ATH to XLM rate on this page is an estimate for a real swap after fees, so it reads a little lower than the ratio of the two market prices. It floats with the market until your deposit confirms.

Type any amount into the calculator below for a live figure. The table under it shows what several ATH amounts come to in XLM after fees. It is worked out from the page's latest quote and carries that quote's time. The daily table tracks the market rate between the two coins on each recent day, before swap fees, from xswap.to's own price record.

ATH to XLM Calculator

Enter an amount to see about how much you would receive. The estimate uses the live floating rate and already includes the payout network fee.

ATH Ethereum ERC-20
You get (estimate)
XLM Stellar
855.8501251 XLM
Rate
1 ATH ≈ 0.0285283 XLM
Value in USD
≈ $116.02
Network Fee
0.02 XLM

ATH to XLM conversion table

Estimates after fees, worked out from one live quote taken at . The rate floats: the calculator and the swap form show the live figure.
You sendYou get (estimate after fees)
10,000 ATH≈ 283.943 XLM
50,000 ATH≈ 1,427.76 XLM
100,000 ATH≈ 2,857.53 XLM
500,000 ATH≈ 14,295.7 XLM
1,000,000 ATH≈ 28,593.4 XLM
5,000,000 ATH≈ 142,975 XLM
10,000,000 ATH≈ 285,952 XLM

ATH to XLM daily rate

Market rate before swap fees, from xswap.to's own daily price record, Nov 16, 2026 to Nov 20, 2026.

Highest0.0299317 XLM
Lowest0.0288611 XLM
Change, 4 days+1.93%
DateRate
1 ATH ≈ 0.0294185 XLM
1 ATH ≈ 0.0289783 XLM
1 ATH ≈ 0.0295771 XLM
1 ATH ≈ 0.0299317 XLM
1 ATH ≈ 0.0288611 XLM
Live Market Snapshot Updated Nov 20, 2026 02:05 UTC
1 ATH price
$0.00398374
1 XLM price
$0.1356
1 ATH buys
0.02852834 XLM

How to swap ATH to XLM

  1. Copy your XLM address

    Open your Stellar wallet's receive screen and copy the account address that starts with G, from an account that already holds XLM. Paste it into Recipient Address and compare the first and last characters. If the address comes from an exchange, also enter the memo it shows with the address.

  2. Enter the ATH amount

    Type it in the form at the top. If it is under the pair's minimum, the form shows that minimum and one tap fills it in. The XLM estimate under it already has the payout fee taken out.

  3. Send ATH to the deposit address

    Press Exchange Now. Your order page shows a one-time Ethereum deposit address: send the amount you entered in one transaction. Send from a wallet set to Ethereum mainnet that holds enough ETH for gas, and keep the max fee it suggests.

  4. Follow the order until XLM arrives

    The status moves from waiting to confirming, exchanging, sending and finished. Keep the transaction ID from the order page until the XLM is in your wallet.

What the ATH to XLM swap costs

Two costs come out of the estimate before you see it: the exchange margin and the Stellar network fee for your payout. You pay the Ethereum gas fee yourself, in ETH: the gas the transfer uses times the base fee plus a priority tip, and most wallets suggest both. An ERC-20 transfer runs the token's contract, so it uses more gas than a plain ETH transfer, and that gas is paid in ETH.

The payout fee is a flat amount per payout, so it takes a larger share of a small swap, and the XLM you get per ATH drops near the minimum. The facts table below lists the typical network fees and the minimum with the date they were checked.

ATH to XLM at a glance

From live exchange data, refreshed hourly.

Item You send You receive
Asset Aethir (ATH) Stellar (XLM)
Network Ethereum Stellar
Type ERC-20 token Native coin
Contract 0xbe0ed4…c5226b -
Memo / tag Not needed Required with your address
Network fee (typical, checked Nov 19, 2026) ≈ 69.17 ATH ≈ 0.02 XLM
Route Cross-chain: Ethereum to Stellar
Rate Floating, estimate shown before you send
Minimum to send (typical, checked Nov 20, 2026) 191.7608427 ATH
Account / ID Not needed to start a swap

How long the ATH to XLM swap takes

The ATH to XLM swap is three waits in a row: the Ethereum network confirms your deposit, the exchange partner swaps it, and the Stellar network delivers the payout. Ethereum runs in 12-second slots, each with one validator chosen to propose a block, though a slot is sometimes empty; the exchange partner swaps once your deposit has the confirmations it requires. In rare cases the partner's compliance check pauses an order, which adds time. The stages in order:

  1. Deposit sent and seen

    Your wallet broadcasts the ATH, and the order page moves from waiting to confirming once the deposit is found.

  2. Ethereum includes it in a block

    Each 12-second slot can add a block. A deposit whose max fee is below the base fee can wait until the base fee falls or you speed it up.

  3. Exchange and XLM payout

    The partner swaps the ATH and sends XLM. The status reaches sending, then finished, and the payout hash appears on the order page.

  4. Payout in a closed ledger

    Your wallet shows the XLM once the ledger with the payout closes, usually a few seconds after it is sent, and the payment is final from then on.

Your XLM address for the payout

A Stellar account address starts with G and is 56 characters of capital letters and the digits 2 to 7. The swap form rejected a muxed address (starts with M, 69 characters) and a contract address (starts with C), so paste the G address and enter any memo separately.

Copy the address from your wallet's receive screen, not from your transaction history, where a scammer's lookalike address can sit next to yours, and compare the first and last characters after pasting. A payout sent to a wrong address cannot be reversed. XLM can also carry a memo. If your address comes from an exchange, enter the memo it gives you, because the exchange uses it to credit your account; a wallet you control usually needs none. Mistakes that cost a payout:

  • Leaving out the memo of an exchange account: exchanges keep many customers in one Stellar account, and a payment without its memo can be lost or need manual tracing.
  • A new G address that holds no XLM yet: it is not an account until someone funds it, and a plain payment to it fails.

Receiving XLM on Stellar: address and memo

Memo or tagNeeded when the receiving wallet asks for one, which exchange accounts usually do. Enter it in the memo field of the form.
Block explorerstellar.expert

After the XLM arrives

The payout is a Stellar payment, and it is final once the ledger that includes it closes, usually a few seconds after it is sent. Every Stellar account must keep a minimum balance in XLM, two base reserves plus more for each trustline or other entry it holds, and that part of the balance cannot be spent. Validators can vote to change the base reserve. Each later transaction also costs a small fee in XLM.

If the address belongs to an exchange, copy its G address and memo exactly as its Stellar deposit page shows them, and check its minimum deposit; exchanges that pool deposits in one account credit you by the memo. To check the payout yourself, open the payout hash from the order page in a Stellar explorer such as stellar.expert.

If your ATH deposit is slow or stuck

Look up the transaction hash on Etherscan. If it is still pending, its max fee is probably below the current base fee, which rises after blocks fuller than the target, or its tip is too small for validators to pick it. It can also wait behind an earlier pending transaction from your address with a lower nonce. If your wallet offers speed up, use it on the oldest pending one: the wallet resends the same transaction with the same nonce and a higher fee, so only one of the two can confirm.

Do not press cancel on a deposit, because a cancellation that confirms means nothing reaches the order. The sped-up version has a new hash, so give that one to support. If Etherscan marks the transaction as failed, the coins stayed in your wallet but the gas was spent, so ask support before you send again. A withdrawal from an exchange account can only be sped up by that exchange.

Never send the deposit a second time to speed things up: a second payment is a second deposit. If the order page has not moved on after your deposit confirmed, message @xswap_to on Telegram with the Ref. ID from the order page and your deposit hash.

What others can see of your ATH to XLM swap

Your deposit is public on Ethereum: your sending address, the deposit address, the amount and the fee show on Etherscan and any other explorer, and they stay there. The payout, its amount, your G address and any memo are visible to anyone on a Stellar explorer such as stellar.expert, and they stay in the ledger's history. The exchange partner that processes the swap sees both sides: your deposit and your payout address.

Before you send

  • Leave enough ETH in your wallet for gas on top of what you send, because Ethereum rejects a transfer whose fee the balance cannot cover.
  • Copy your XLM address from the wallet's receive screen and compare its start and end after pasting.
  • Enter the memo your exchange gives you for XLM, or the payout cannot be credited to your account.
  • Send the amount you entered in one transaction, and let your wallet add its network fee on top.
  • Bookmark the order page and save its Ref. ID, because the Track Order list is stored only in this browser.

ATH to XLM Frequently Asked Questions

How do I swap ATH to XLM?

Enter the ATH amount and your XLM address in the form at the top, press Exchange Now, and send ATH on Ethereum to the one-time deposit address on your order page. After the Ethereum network confirms the deposit, the exchange partner sends XLM to your address. No account or email is needed.

How much XLM do I get for 1 ATH?

The amount table in the rate section shows it for several sizes, as an estimate after fees with the time of the quote. For your own amount, the ATH to XLM calculator asks for a live estimate. No figure is written here, because the rate floats.

How long does ATH to XLM take?

There is no set time: the Ethereum network confirms the deposit first, then the exchange partner swaps it and sends the XLM payout. The timing section on this page lists each stage, and the order page shows which one you are in.

Is there a minimum amount for ATH to XLM?

Yes, every pair has a minimum, and it moves with network conditions. The facts table on this page lists the last checked figure. The swap form warns you when your amount is under the current one. A deposit below it cannot be swapped, and getting those coins back is not assured.

Can I swap Aethir to Stellar without KYC?

You need no account, and xswap.to asks for no ID. In rare cases the exchange partner's automated anti-money-laundering screening pauses a flagged swap and asks for verification, and the order then shows the status verifying. If that happens, message @xswap_to on Telegram with your transaction ID.

Do I need a memo or tag to swap ATH to XLM?

For the payout, only if your XLM address belongs to an exchange: enter the memo it shows with the address. A wallet you control usually needs none.

Why is the XLM I received different from the estimate?

The rate floats, so the market can move between the estimate and the moment your deposit confirms. A different deposit amount changes the payout too: if your wallet took its network fee out of the amount, less ATH arrived than you entered.

How do I swap XLM back to ATH?

Use the XLM to ATH page, linked next to the swap form. It works the same way in reverse: paste an Ethereum address, then send XLM to the one-time deposit address.

About these numbers

The calculator and the swap form ask for a live estimate for the amount you type; if one fails to load, try again a few seconds later. The amount table is worked out from the page's latest quote and the network fees in it, so treat it as a guide and use the calculator for your own amount. The daily rates come from xswap.to's own price record, one value per day, and show the market rate before swap fees. Fees and the minimum in the facts table are typical figures with their check date.

Guides for this swap

Related swaps

Popular swaps