Swap Avalanche (AVAX) to Hamster Kombat (HMSTR) with no sign-up
Enter the AVAX amount, paste a TON wallet address from your own wallet, then send AVAX on the Avalanche X-Chain to the one-time deposit address on your order page. Once the Avalanche X-Chain network has confirmed the deposit, the exchange partner swaps it at the floating rate and sends HMSTR on TON straight to your address.
Swap without creating an account or uploading ID. xswap.to never asks for your seed phrase or private keys, and the exchanged coins go straight to your wallet. In rare cases the exchange partner's compliance check can pause a swap and ask for verification.
The AVAX to HMSTR rate on this page is an estimate for a real swap after fees, so it reads a little lower than the ratio of the two market prices. It floats with the market until your deposit confirms.
Type any amount into the calculator below for a live figure. The table under it shows what several AVAX amounts come to in HMSTR after fees. It is worked out from the page's latest quote and carries that quote's time. The daily table tracks the market rate between the two coins on each recent day, before swap fees, from xswap.to's own price record.
AVAX to HMSTR Calculator
Enter an amount to see about how much you would receive. The estimate uses the live floating rate and already includes the payout network fee.
AVAXAvalanche X-Chain
You get (estimate)
HMSTRTONJetton
Rate
1 AVAX ≈ 44,188.8 HMSTR
Value in USD
≈ $66.74
Network Fee
399.6577514 HMSTR
AVAX to HMSTR conversion table
Estimates after fees, worked out from one live quote taken at . The rate floats: the calculator and the swap form show the live figure.
Market rate before swap fees, from xswap.to's own daily price record, Nov 16, 2026 to Nov 22, 2026.
Highest53,533.8 HMSTR
Lowest43,622.1 HMSTR
Change, 6 days−14.84%
53,533.843,622.1Nov 16, 2026Nov 22, 2026
Date
Rate
1 AVAX ≈ 45,588.6 HMSTR
1 AVAX ≈ 43,622.1 HMSTR
1 AVAX ≈ 49,487.3 HMSTR
1 AVAX ≈ 49,984.8 HMSTR
1 AVAX ≈ 50,057.3 HMSTR
1 AVAX ≈ 50,025.6 HMSTR
1 AVAX ≈ 53,533.8 HMSTR
Live Market SnapshotUpdated Nov 22, 2026 19:07 UTC
1 AVAX price
$6.97
1 HMSTR price
$0.00015103
1 AVAX buys
44188.81023723 HMSTR
How to swap AVAX to HMSTR
1
Copy your HMSTR address
Open your TON wallet's receive screen and copy the address it shows, which usually starts with UQ, the non-bounceable form wallet apps use for receiving. Paste it into Recipient Address and compare the first and last characters.
2
Enter the AVAX amount
Type it in the form at the top. If it is under the pair's minimum, the form shows that minimum and one tap fills it in. The HMSTR estimate under it already has the payout fee taken out.
3
Send AVAX to the deposit address
Press Exchange Now. Your order page shows a one-time Avalanche X-Chain deposit address: send the amount you entered in one transaction. Send AVAX from your wallet's X-Chain balance, not from the C-Chain, and leave some AVAX there for the fixed network fee.
4
Follow the order until HMSTR arrives
The status moves from waiting to confirming, exchanging, sending and finished. Keep the transaction ID from the order page until the HMSTR is in your wallet.
What the AVAX to HMSTR swap costs
Two costs come out of the estimate before you see it: the exchange margin and the TON network fee for your payout. You pay the X-Chain network fee yourself, in AVAX: it is a fixed amount per transaction, set by the protocol and burned, so your wallet adds it without a fee rate to choose.
The payout fee is a flat amount per payout, so it takes a larger share of a small swap, and the HMSTR you get per AVAX drops near the minimum. The facts table below lists the typical network fees and the minimum with the date they were checked.
AVAX to HMSTR at a glance
From live exchange data, refreshed hourly.
Item
You send
You receive
Asset
Avalanche (AVAX)
Hamster Kombat (HMSTR)
Network
Avalanche X-Chain
TON
Type
Native coin
Jetton token
Contract
-
EQAJ8uWd…drPcUo
Memo / tag
Not needed
Not needed
Network fee (typical, checked Nov 22, 2026)
≈ 0.01 AVAX
≈ 387.9 HMSTR
Route
Cross-chain: Avalanche X-Chain to TON
Rate
Floating, estimate shown before you send
Minimum to send (typical, checked Nov 22, 2026)
0.040764 AVAX
Account / ID
Not needed to start a swap
How long the AVAX to HMSTR swap takes
The AVAX to HMSTR swap is three waits in a row: the Avalanche X-Chain network confirms your deposit, the exchange partner swaps it, and the TON network delivers the payout. On the Avalanche X-Chain, validators accept a block once repeated rounds of polling each other agree on it, and an accepted block is final; the exchange partner swaps after your deposit has the confirmations it requires. In rare cases the partner's compliance check pauses an order, which adds time. The stages in order:
1Deposit sent and seen
Your wallet broadcasts the AVAX, and the order page moves from waiting to confirming once the deposit is found.
2X-Chain validators accept it
Once validators accept the block that holds your deposit, the transfer is final.
3Exchange and HMSTR payout
The partner swaps the AVAX and sends HMSTR. The status reaches sending, then finished, and the payout hash appears on the order page.
4Payout final on TON
Your wallet lists the HMSTR under your address once the transfer is in a block, and a masterchain block then makes it final.
Your HMSTR address for the payout
A TON wallet address is usually shown as 48 characters of letters, digits, hyphens and the underline sign, starting with UQ (non-bounceable, the form meant for wallets) or EQ (bounceable). The raw form is 0: followed by 64 hex characters. All forms point to the same account; for a new, unused wallet, give the UQ form.
Copy the address from your wallet's receive screen, not from your transaction history, where a scammer's lookalike address can sit next to yours, and compare the first and last characters after pasting. A payout sent to a wrong address cannot be reversed. Mistakes that cost a payout:
The EQ form of a wallet that has never sent anything: Gram (TON) sent in bounceable form to an undeployed wallet returns to the sender, so give the UQ form.
An exchange deposit address that needs a memo, entered without it or for a coin whose listing here has no memo field: the exchange cannot match the payout automatically.
A Jetton wallet or Jetton master address copied from an explorer: payouts must go to your regular wallet address, the one your wallet app shows.
On the sending side, send AVAX only on the Avalanche X-Chain, the network your order page names. AVAX sent on another network does not reach the deposit address. AVAX exists on more than one network, and each is a separate entry in the coin list. Choose the entry that matches the network your coins are on before you create the order.
The payout is final once a masterchain block includes it, which normally takes about a second, and your wallet lists it under the address you pasted. If nothing shows, compare the wallet app's address with the one on the order page: one recovery phrase can control several TON wallets, one per wallet version, each with its own address and balance. Your HMSTR sits in a separate Jetton wallet contract linked to your address, which the incoming transfer opens if needed with Gram (TON) the sender attaches; moving it later takes Gram (TON) for fees, unless your wallet app offers gasless transfers.
If the address belongs to an exchange, check that the exchange gives it for HMSTR deposits on the TON network, note its minimum deposit, and enter the memo it shows; when the form has no memo field for HMSTR, receive to your own wallet instead. To check the payout yourself, open the payout hash from the order page in a TON explorer such as Tonviewer.
If your AVAX deposit is slow or stuck
Look up the transaction ID on the X-Chain pages of the Avalanche Explorer. The X-Chain charges a fixed fee per transaction, so there is no fee to raise when a deposit waits, and once validators accept the transaction it is final. If the explorer shows nothing, check in your wallet that the transfer left your X-Chain balance and was not sent on another chain.
AVAX held on the C-Chain under an 0x address cannot pay this deposit. A wallet that supports both chains moves it across in two transactions, an export from the C-Chain and an import on the X-Chain, each with its own fee. If the import step never completed, the AVAX waits between the chains until you finish it.
Never send the deposit a second time to speed things up: a second payment is a second deposit. If the order page has not moved on after your deposit confirmed, message @xswap_to on Telegram with the Ref. ID from the order page and your deposit hash.
What others can see of your AVAX to HMSTR swap
Your deposit is public: the amount and the X-Chain addresses on both sides stay on the chain, where anyone can look them up on the Avalanche Explorer. The payout, its amount and your receiving address are visible to anyone in a TON explorer, together with your wallet's balance and token holdings. The exchange partner that processes the swap sees both sides: your deposit and your payout address.
Before you send
Check that your wallet sends from its X-Chain balance, because AVAX on the C-Chain or another network cannot reach this deposit address.
Copy your HMSTR address from the wallet's receive screen and compare its start and end after pasting.
Send the amount you entered in one transaction, and let your wallet add its network fee on top.
Bookmark the order page and save its Ref. ID, because the Track Order list is stored only in this browser.
AVAX to HMSTR Frequently Asked Questions
How do I swap AVAX to HMSTR?
Enter the AVAX amount and your HMSTR address in the form at the top, press Exchange Now, and send AVAX on the Avalanche X-Chain to the one-time deposit address on your order page. After the Avalanche X-Chain network confirms the deposit, the exchange partner sends HMSTR on TON to your address. No account or email is needed.
How much HMSTR do I get for 1 AVAX?
The amount table in the rate section shows it for several sizes, as an estimate after fees with the time of the quote. For your own amount, the AVAX to HMSTR calculator asks for a live estimate. No figure is written here, because the rate floats.
How long does AVAX to HMSTR take?
There is no set time: the Avalanche X-Chain network confirms the deposit first, then the exchange partner swaps it and sends the HMSTR payout. The timing section on this page lists each stage, and the order page shows which one you are in.
Is there a minimum amount for AVAX to HMSTR?
Yes, every pair has a minimum, and it moves with network conditions. The facts table on this page lists the last checked figure. The swap form warns you when your amount is under the current one. A deposit below it cannot be swapped, and getting those coins back is not assured.
Can I swap Avalanche to Hamster Kombat without KYC?
You need no account, and xswap.to asks for no ID. In rare cases the exchange partner's automated anti-money-laundering screening pauses a flagged swap and asks for verification, and the order then shows the status verifying. If that happens, message @xswap_to on Telegram with your transaction ID.
Why is the HMSTR I received different from the estimate?
The rate floats, so the market can move between the estimate and the moment your deposit confirms. A different deposit amount changes the payout too: if your wallet took its network fee out of the amount, less AVAX arrived than you entered.
How do I swap HMSTR back to AVAX?
Use the HMSTR to AVAX page, linked next to the swap form. It works the same way in reverse: paste an Avalanche X-Chain address, then send HMSTR to the one-time deposit address.
About these numbers
The calculator and the swap form ask for a live estimate for the amount you type; if one fails to load, try again a few seconds later. The amount table is worked out from the page's latest quote and the network fees in it, so treat it as a guide and use the calculator for your own amount. The daily rates come from xswap.to's own price record, one value per day, and show the market rate before swap fees. Fees and the minimum in the facts table are typical figures with their check date.