Exchange Currencies Track Order Guides Telegram bot

Swap Dai (DAI) to Hyperliquid (HYPE) with no sign-up

Enter the DAI amount, paste your 0x address on HyperEVM from your own wallet, then send DAI on Arbitrum One to the one-time deposit address on your order page. Once the Arbitrum One network has confirmed the deposit, the exchange partner swaps it at the floating rate and sends HYPE on HyperEVM straight to your address.

Swap HYPE to DAI instead

Rate
1 DAI ≈ 0.0150186 HYPE
Network Fee
-
Deposit Fee
-

Enter an address on the HyperEVM network. Coins sent to an address on another network can be lost.

Swap in Telegram

No Account Needed to Start

Swap without creating an account or uploading ID. xswap.to never asks for your seed phrase or private keys, and the exchanged coins go straight to your wallet. In rare cases the exchange partner's compliance check can pause a swap and ask for verification.

Updated Written and checked by the xswap.to team

DAI to HYPE exchange rate

The DAI to HYPE rate on this page is an estimate for a real swap after fees, so it reads a little lower than the ratio of the two market prices. It floats with the market until your deposit confirms.

Type any amount into the calculator below for a live figure. The table under it shows what several DAI amounts come to in HYPE after fees. It is worked out from the page's latest quote and carries that quote's time.

DAI to HYPE Calculator

Enter an amount to see about how much you would receive. The estimate uses the live floating rate and already includes the payout network fee.

DAI Arbitrum ERC-20
You get (estimate)
HYPE HyperEVM
1.5018553 HYPE
Rate
1 DAI ≈ 0.0150186 HYPE
Value in USD
≈ $100.89
Network Fee
0.00021 HYPE

DAI to HYPE conversion table

Estimates after fees, worked out from one live quote taken at . The rate floats: the calculator and the swap form show the live figure.
You sendYou get (estimate after fees)
100 DAI≈ 1.50186 HYPE
500 DAI≈ 7.51179 HYPE
1,000 DAI≈ 15.0242 HYPE
5,000 DAI≈ 75.1236 HYPE
10,000 DAI≈ 150.248 HYPE
50,000 DAI≈ 751.241 HYPE
Live Market Snapshot Updated Nov 20, 2026 02:12 UTC
1 DAI price
$1.00
1 HYPE price
$67.18
1 DAI buys
0.01501855 HYPE

DAI to HYPE market price range

Over the last 30 days, 1 DAI was worth between 0.011126 and 0.013124 HYPE at market prices. Over the last 90 days the range was 0.010289 to 0.018578 HYPE.

Aug 9, 2026Low 0.010289 · High 0.018578 HYPENov 6, 2026

Market price of 1 DAI in HYPE over the last 90 days

Based on daily market prices, checked on Nov 7, 2026. This is not your swap rate: the estimate in the swap form includes fees and moves with the market.

How to swap DAI to HYPE

  1. Copy your HYPE address

    Open your wallet on HyperEVM, chain ID 999, which wallets may list as Hyperliquid, and copy the 0x address from its receive screen. Paste it into Recipient Address and compare the first and last characters.

  2. Enter the DAI amount

    Type it in the form at the top. If it is under the pair's minimum, the form shows that minimum and one tap fills it in. The HYPE estimate under it already has the payout fee taken out.

  3. Send DAI to the deposit address

    Press Exchange Now. Your order page shows a one-time Arbitrum One deposit address: send the amount you entered in one transaction. Send from a wallet switched to Arbitrum One that holds some ETH there for gas, and check the network name on the confirmation screen before you approve.

  4. Follow the order until HYPE arrives

    The status moves from waiting to confirming, exchanging, sending and finished. Keep the transaction ID from the order page until the HYPE is in your wallet.

What the DAI to HYPE swap costs

Two costs come out of the estimate before you see it: the exchange margin and the HyperEVM network fee for your payout. You pay the Arbitrum One network fee yourself, and the network charges it in ETH, for ETH and tokens alike. Your wallet shows one fee that covers the work on Arbitrum and a share of posting the data to Ethereum. Sending DAI on Arbitrum One still costs gas, charged in ETH on Arbitrum One, so most wallets need some ETH there as well as the DAI.

The payout fee is a flat amount per payout, so it takes a larger share of a small swap, and the HYPE you get per DAI drops near the minimum. The facts table below lists the typical network fees and the minimum with the date they were checked.

DAI to HYPE at a glance

From live exchange data, refreshed hourly.

Item You send You receive
Asset Dai (Arbitrum One) (DAI) Hyperliquid (HyperEVM) (HYPE)
Network Arbitrum One HyperEVM
Type ERC-20 token Native coin
Contract 0xDA1000…000da1 -
Memo / tag Not needed Not needed
Network fee (typical, checked Nov 19, 2026) ≈ 0.02794 DAI ≈ 0.00021 HYPE
Route Cross-chain: Arbitrum One to HyperEVM
Rate Floating, estimate shown before you send
Minimum to send (typical, checked Nov 20, 2026) 0.0917453 DAI
Account / ID Not needed to start a swap

How long the DAI to HYPE swap takes

The DAI to HYPE swap is three waits in a row: the Arbitrum One network confirms your deposit, the exchange partner swaps it, and the HyperEVM network delivers the payout. Arbitrum One's sequencer, which orders transactions, confirms your deposit provisionally once it puts it in a block. The deposit is final when the batch holding it is posted to Ethereum and final there, and the exchange partner swaps after the confirmations it requires. In rare cases the partner's compliance check pauses an order, which adds time. The stages in order:

  1. Deposit sent and seen

    Your wallet broadcasts the DAI, and the order page moves from waiting to confirming once the deposit is found.

  2. Arbitrum One sequences the deposit

    The sequencer puts it in a block or, if it cannot do so in time, drops it rather than leaving it pending.

  3. Exchange and HYPE payout

    The partner swaps the DAI and sends HYPE. The status reaches sending, then finished, and the payout hash appears on the order page.

  4. Payout lands on HyperEVM

    Your wallet lists it once a HyperEVM block includes the transfer, as long as the wallet is set to HyperEVM.

Your HYPE address for the payout

A HyperEVM address is 0x followed by 40 hex characters. The swap form accepted that format in our checks. Copy the address from your wallet's receive screen, not from your transaction history, where a scammer's lookalike address can sit next to yours, and compare the first and last characters after pasting. A payout sent to a wrong address cannot be reversed. Mistakes that cost a payout:

  • An exchange address that takes this coin only on HyperCore: Hyperliquid's docs say some exchanges support HYPE from HyperCore spot balances but not on HyperEVM.
  • Hyperliquid's HYPE transfer address 0x2222222222222222222222222222222222222222: HYPE sent there goes to the HyperCore balance of the sender, which for a payout is not you.
  • A smart contract wallet address, such as a multisig, that exists on another network but not on HyperEVM: getting a payout back then depends on deploying that wallet there.

Receiving HYPE on HyperEVM: address and memo

Memo or tagNot used on this network.
Block explorerhyperevmscan.io

Send DAI on the right network

On the sending side, send DAI only on Arbitrum One, the network your order page names. DAI sent on another network does not reach the deposit address. DAI exists on more than one network, and each is a separate entry in the coin list. Choose the entry that matches the network your coins are on before you create the order.

After the HYPE arrives

The payout is a HyperEVM transfer, so it lands in your HyperEVM balance and shows in a wallet set to HyperEVM. Hyperliquid's spot and perp balances live on HyperCore, a separate part of the same blockchain, so the payout does not appear there by itself. To trade the HYPE on Hyperliquid's order books, move it to your HyperCore spot balance with the Transfer to/from EVM button in Hyperliquid's app; that transfer costs gas in HYPE.

If the address belongs to an exchange, confirm that it accepts this coin on HyperEVM itself, not only on HyperCore, and what its minimum deposit is. To check the payout yourself, open the payout hash from the order page in a HyperEVM explorer such as hyperevmscan.io.

If your DAI deposit is slow or stuck

Look up the transaction hash on Arbiscan first. If Arbiscan has no record of it, check which network your wallet sent on: the same 0x address exists on Ethereum, Arbitrum Nova and other EVM networks, but the order waits for a transfer on Arbitrum One only. Most wallets work on one network at a time, so the wrong one is easy to pick.

Arbitrum One keeps no long pending pool: the sequencer holds a transaction for seconds, then puts it in a block or drops it, for example when the base fee has risen above the maximum fee your wallet set. A dropped transaction never runs, so nothing leaves your wallet. If the wallet still lists it as pending, its speed up option, where offered, sends it again with the same nonce, so only one copy can go through; ask support before you make a new transfer.

Never send the deposit a second time to speed things up: a second payment is a second deposit. If the order page has not moved on after your deposit confirmed, message @xswap_to on Telegram with the Ref. ID from the order page and your deposit hash.

What others can see of your DAI to HYPE swap

Your deposit is public: the amount, your sending address and the deposit address show on Arbiscan, and the transaction data is also posted to Ethereum. The payout, its amount and your receiving address are public on HyperEVM explorers such as hyperevmscan.io, where anyone can look up that address. The exchange partner that processes the swap sees both sides: your deposit and your payout address.

Before you send

  • Switch your wallet to Arbitrum One and keep some ETH there for gas before you send, even when the deposit is a token.
  • Copy your HYPE address from the wallet's receive screen and compare its start and end after pasting.
  • Send the amount you entered in one transaction, and let your wallet add its network fee on top.
  • Bookmark the order page and save its Ref. ID, because the Track Order list is stored only in this browser.

DAI to HYPE Frequently Asked Questions

How do I swap DAI to HYPE?

Enter the DAI amount and your HYPE address in the form at the top, press Exchange Now, and send DAI on Arbitrum One to the one-time deposit address on your order page. After the Arbitrum One network confirms the deposit, the exchange partner sends HYPE on HyperEVM to your address. No account or email is needed.

How much HYPE do I get for 1 DAI?

The amount table in the rate section shows it for several sizes, as an estimate after fees with the time of the quote. For your own amount, the DAI to HYPE calculator asks for a live estimate. No figure is written here, because the rate floats.

How long does DAI to HYPE take?

There is no set time: the Arbitrum One network confirms the deposit first, then the exchange partner swaps it and sends the HYPE payout. The timing section on this page lists each stage, and the order page shows which one you are in.

Is there a minimum amount for DAI to HYPE?

Yes, every pair has a minimum, and it moves with network conditions. The facts table on this page lists the last checked figure. The swap form warns you when your amount is under the current one. A deposit below it cannot be swapped, and getting those coins back is not assured.

Can I swap Dai to Hyperliquid without KYC?

You need no account, and xswap.to asks for no ID. In rare cases the exchange partner's automated anti-money-laundering screening pauses a flagged swap and asks for verification, and the order then shows the status verifying. If that happens, message @xswap_to on Telegram with your transaction ID.

Why is the HYPE I received different from the estimate?

The rate floats, so the market can move between the estimate and the moment your deposit confirms. A different deposit amount changes the payout too: if your wallet took its network fee out of the amount, less DAI arrived than you entered.

How do I swap HYPE back to DAI?

Use the HYPE to DAI page, linked next to the swap form. It works the same way in reverse: paste an Arbitrum One address, then send HYPE to the one-time deposit address.

About these numbers

The calculator and the swap form ask for a live estimate for the amount you type; if one fails to load, try again a few seconds later. The amount table is worked out from the page's latest quote and the network fees in it, so treat it as a guide and use the calculator for your own amount. Fees and the minimum in the facts table are typical figures with their check date.

Guides for this swap

Related swaps

Popular swaps